Built-in function reference

In Puppet 6, many Puppet types were moved out of the Puppet codebase, and into modules on the Puppet Forge. The new functions handle undef values more strictly than their stdlib counterparts. In Puppet 6, code that relies on undef values being implicitly treated as other types will return an evaluation error. For more information on which types were moved into modules, see the Puppet 6 release notes.

Returns the absolute value of a Numeric value, for example -34.56 becomes 34.56. Takes a single Integer or Float value as an argument.

Deprecated behavior

For backwards compatibility reasons this function also works when given a number in String format such that it first attempts to covert it to either a Float or an Integer and then taking the absolute value of the result. Only strings representing a number in decimal format is supported - an error is raised if value is not decimal (using base 10). Leading 0 chars in the string are ignored. A floating point value in string form can use some forms of scientific notation but not all.

Callers should convert strings to Numeric before calling this function to have full control over the conversion.

abs(Numeric($str_val))

It is worth noting that Numeric can convert to absolute value directly as in the following examples:

Numeric($strval, true)     # Converts to absolute Integer or Float
Integer($strval, 10, true) # Converts to absolute Integer using base 10 (decimal)
Integer($strval, 16, true) # Converts to absolute Integer using base 16 (hex)
Float($strval, true)       # Converts to absolute Float

Signature 1

abs(Numeric $val)

Signature 2

abs(String $val)

Logs a message on the server at level alert.

alert(Any *$values)

Runs a lambda repeatedly using each value in a data structure until the lambda returns a non "truthy" value which makes the function return false, or if the end of the iteration is reached, true is returned.

This function takes two mandatory arguments, in this order:

1. An array, hash, or other iterable object that the function will iterate over.

2. A lambda, which the function calls for each element in the first argument. It can request one or two parameters.

$data.all |$parameter| { <PUPPET CODE BLOCK> }

or

all($data) |$parameter| { <PUPPET CODE BLOCK> }

# For the array $data, run a lambda that checks that all values are multiples of 10
$data = [10, 20, 30]
notice $data.all |$item| { $item % 10 == 0 }

Would notice true.

When the first argument is a Hash, Puppet passes each key and value pair to the lambda as an array in the form [key, value].

# For the hash $data, run a lambda using each item as a key-value array
$data = { 'a_0'=> 10, 'b_1' => 20 }
notice $data.all |$item| { $item[1] % 10 == 0  }

Would notice true if all values in the hash are multiples of 10.

When the lambda accepts two arguments, the first argument gets the index in an array or the key from a hash, and the second argument the value.

# Check that all values are a multiple of 10 and keys start with 'abc'
$data = {abc_123 => 10, abc_42 => 20, abc_blue => 30}
notice $data.all |$key, $value| { $value % 10 == 0  and $key =~ /^abc/ }

Would notice true.

For an general examples that demonstrates iteration, see the Puppet iteration documentation.

Signature 1

all(Hash[Any, Any] $hash, Callable[2,2] &$block)

Signature 2

all(Hash[Any, Any] $hash, Callable[1,1] &$block)

Signature 3

all(Iterable $enumerable, Callable[2,2] &$block)

Signature 4

all(Iterable $enumerable, Callable[1,1] &$block)

Handles annotations on objects. The function can be used in four different ways.

With two arguments, an Annotation type and an object, the function returns the annotation for the object of the given type, or undef if no such annotation exists.

$annotation = Mod::NickNameAdapter.annotate(o)

$annotation = annotate(Mod::NickNameAdapter.annotate, o)

With three arguments, an Annotation type, an object, and a block, the function returns the annotation for the object of the given type, or annotates it with a new annotation initialized from the hash returned by the given block when no such annotation exists. The block will not be called when an annotation of the given type is already present.

$annotation = Mod::NickNameAdapter.annotate(o) || { { 'nick_name' => 'Buddy' } }

$annotation = annotate(Mod::NickNameAdapter.annotate, o) || { { 'nick_name' => 'Buddy' } }

With three arguments, an Annotation type, an object, and an Hash, the function will annotate the given object with a new annotation of the given type that is initialized from the given hash. An existing annotation of the given type is discarded.

$annotation = Mod::NickNameAdapter.annotate(o, { 'nick_name' => 'Buddy' })

$annotation = annotate(Mod::NickNameAdapter.annotate, o, { 'nick_name' => 'Buddy' })

With three arguments, an Annotation type, an object, and an the string clear, the function will clear the annotation of the given type in the given object. The old annotation is returned if it existed.

$annotation = Mod::NickNameAdapter.annotate(o, clear)

$annotation = annotate(Mod::NickNameAdapter.annotate, o, clear)

With three arguments, the type Pcore, an object, and a Hash of hashes keyed by Annotation types, the function will annotate the given object with all types used as keys in the given hash. Each annotation is initialized with the nested hash for the respective type. The annotated object is returned.

  $person = Pcore.annotate(Mod::Person({'name' => 'William'}), {
    Mod::NickNameAdapter >= { 'nick_name' => 'Bill' },
    Mod::HobbiesAdapter => { 'hobbies' => ['Ham Radio', 'Philatelist'] }
  })

Signature 1

annotate(Type[Annotation] $type, Any $value, Optional[Callable[0, 0]] &$block)

Signature 2

annotate(Type[Annotation] $type, Any $value, Variant[Enum[clear],Hash[Pcore::MemberName,Any]] $annotation_hash)

Signature 3

annotate(Type[Pcore] $type, Any $value, Hash[Type[Annotation], Hash[Pcore::MemberName,Any]] $annotations)

Runs a lambda repeatedly using each value in a data structure until the lambda returns a "truthy" value which makes the function return true, or if the end of the iteration is reached, false is returned.

This function takes two mandatory arguments, in this order:

1. An array, hash, or other iterable object that the function will iterate over.

2. A lambda, which the function calls for each element in the first argument. It can request one or two parameters.

$data.any |$parameter| { <PUPPET CODE BLOCK> }

or

any($data) |$parameter| { <PUPPET CODE BLOCK> }

# For the array $data, run a lambda that checks if an unknown hash contains those keys
$data = ["routers", "servers", "workstations"]
$looked_up = lookup('somekey', Hash)
notice $data.any |$item| { $looked_up[$item] }

Would notice true if the looked up hash had a value that is neither false nor undef for at least one of the keys. That is, it is equivalent to the expression $looked_up[routers] || $looked_up[servers] || $looked_up[workstations].

When the first argument is a Hash, Puppet passes each key and value pair to the lambda as an array in the form [key, value].

# For the hash $data, run a lambda using each item as a key-value array.
$data = {"rtr" => "Router", "svr" => "Server", "wks" => "Workstation"}
$looked_up = lookup('somekey', Hash)
notice $data.any |$item| { $looked_up[$item[0]] }

Would notice true if the looked up hash had a value for one of the wanted key that is neither false nor undef.

When the lambda accepts two arguments, the first argument gets the index in an array or the key from a hash, and the second argument the value.

# Check if there is an even numbered index that has a non String value
$data = [key1, 1, 2, 2]
notice $data.any |$index, $value| { $index % 2 == 0 and $value !~ String }

Would notice true as the index 2 is even and not a String

For an general examples that demonstrates iteration, see the Puppet iteration documentation.

Signature 1

any(Hash[Any, Any] $hash, Callable[2,2] &$block)

Signature 2

any(Hash[Any, Any] $hash, Callable[1,1] &$block)

Signature 3

any(Iterable $enumerable, Callable[2,2] &$block)

Signature 4

any(Iterable $enumerable, Callable[1,1] &$block)

Returns the given value if it is of the given data type, or otherwise either raises an error or executes an optional two-parameter lambda.

The function takes two mandatory arguments, in this order:

1. The expected data type.

2. A value to compare against the expected data type.

$raw_username = 'Amy Berry'

# Assert that $raw_username is a non-empty string and assign it to $valid_username.
$valid_username = assert_type(String[1], $raw_username)

# $valid_username contains "Amy Berry".
# If $raw_username was an empty string or a different data type, the Puppet run would
# fail with an "Expected type does not match actual" error.

You can use an optional lambda to provide enhanced feedback. The lambda takes two mandatory parameters, in this order:

1. The expected data type as described in the function's first argument.

2. The actual data type of the value.

$raw_username = 'Amy Berry'

# Assert that $raw_username is a non-empty string and assign it to $valid_username.
# If it isn't, output a warning describing the problem and use a default value.
$valid_username = assert_type(String[1], $raw_username) |$expected, $actual| {
  warning( "The username should be \'${expected}\', not \'${actual}\'. Using 'anonymous'." )
  'anonymous'
}

# $valid_username contains "Amy Berry".
# If $raw_username was an empty string, the Puppet run would set $valid_username to
# "anonymous" and output a warning: "The username should be 'String[1, default]', not
# 'String[0, 0]'. Using 'anonymous'."

For more information about data types, see the documentation.

Signature 1

assert_type(Type $type, Any $value, Optional[Callable[Type, Type]] &$block)

Signature 2

assert_type(String $type_string, Any $value, Optional[Callable[Type, Type]] &$block)

Loads a binary file from a module or file system and returns its contents as a Binary. The argument to this function should be a <MODULE NAME>/<FILE> reference, which will load <FILE> from a module's files directory. (For example, the reference mysql/mysqltuner.pl will load the file <MODULES DIRECTORY>/mysql/files/mysqltuner.pl.)

This function also accepts an absolute file path that allows reading binary file content from anywhere on disk.

An error is raised if the given file does not exists.

To search for the existence of files, use the find_file() function.

• since 4.8.0

binary_file(String $path)

Breaks an innermost iteration as if it encountered an end of input. This function does not return to the caller.

The signal produced to stop the iteration bubbles up through the call stack until either terminating the innermost iteration or raising an error if the end of the call stack is reached.

The break() function does not accept an argument.

$data = [1,2,3]
notice $data.map |$x| { if $x == 3 { break() } $x*10 }

Would notice the value [10, 20]

function break_if_even($x) {
  if $x % 2 == 0 { break() }
}
$data = [1,2,3]
notice $data.map |$x| { break_if_even($x); $x*10 }

Would notice the value [10]

• Also see functions next and return

break()

Calls an arbitrary Puppet function by name.

This function takes one mandatory argument and one or more optional arguments:

1. A string corresponding to a function name.

2. Any number of arguments to be passed to the called function.

3. An optional lambda, if the function being called supports it.

This function can also be used to resolve a Deferred given as the only argument to the function (does not accept arguments nor a block).

$a = 'notice'
call($a, 'message')

$a = 'each'
$b = [1,2,3]
call($a, $b) |$item| {
 notify { $item: }
}

The call function can be used to call either Ruby functions or Puppet language functions.

When used with Deferred values, the deferred value can either describe a function call, or a dig into a variable.

$d = Deferred('join', [[1,2,3], ':']) # A future call to join that joins the arguments 1,2,3 with ':'
notice($d.call())

Would notice the string "1:2:3".

$d = Deferred('$facts', ['processors', 'count'])
notice($d.call())

Would notice the value of $facts['processors']['count'] at the time when the call is made.

• Deferred values supported since Puppet 6.0

Signature 1

call(String $function_name, Any *$arguments, Optional[Callable] &$block)

Signature 2

call(Deferred $deferred)

Creates a Camel Case version of a String

This function is compatible with the stdlib function with the same name.

The function does the following:

• For a String the conversion replaces all combinations of *_<char>* with an upcased version of the character following the _. This is done using Ruby system locale which handles some, but not all special international up-casing rules (for example German double-s ß is upcased to "Ss").

• For an Iterable[Variant[String, Numeric]] (for example an Array) each value is capitalized and the conversion is not recursive.

• If the value is Numeric it is simply returned (this is for backwards compatibility).

• An error is raised for all other data types.

• The result will not contain any underscore characters.

Please note: This function relies directly on Ruby's String implementation and as such may not be entirely UTF8 compatible. To ensure best compatibility please use this function with Ruby 2.4.0 or greater - https://bugs.ruby-lang.org/issues/10085.

'hello_friend'.camelcase()
camelcase('hello_friend')

Would both result in "HelloFriend"

['abc_def', 'bcd_xyz'].camelcase()
camelcase(['abc_def', 'bcd_xyz'])

Would both result in ['AbcDef', 'BcdXyz']

Signature 1

camelcase(Numeric $arg)

Signature 2

camelcase(String $arg)

Signature 3

camelcase(Iterable[Variant[String, Numeric]] $arg)

Capitalizes the first character of a String, or the first character of every String in an Iterable value (such as an Array).

This function is compatible with the stdlib function with the same name.

The function does the following:

• For a String, a string is returned in which the first character is uppercase. This is done using Ruby system locale which handles some, but not all special international up-casing rules (for example German double-s ß is capitalized to "Ss").

• For an Iterable[Variant[String, Numeric]] (for example an Array) each value is capitalized and the conversion is not recursive.

• If the value is Numeric it is simply returned (this is for backwards compatibility).

• An error is raised for all other data types.

Please note: This function relies directly on Ruby's String implementation and as such may not be entirely UTF8 compatible. To ensure best compatibility please use this function with Ruby 2.4.0 or greater - https://bugs.ruby-lang.org/issues/10085.

'hello'.capitalize()
capitalize('hello')

Would both result in "Hello"

['abc', 'bcd'].capitalize()
capitalize(['abc', 'bcd'])

Would both result in ['Abc', 'Bcd']

Signature 1

capitalize(Numeric $arg)

Signature 2

capitalize(String $arg)

Signature 3

capitalize(Iterable[Variant[String, Numeric]] $arg)

Returns the smallest Integer greater or equal to the argument. Takes a single numeric value as an argument.

This function is backwards compatible with the same function in stdlib and accepts a Numeric value. A String that can be converted to a floating point number can also be used in this version - but this is deprecated.

In general convert string input to Numeric before calling this function to have full control over how the conversion is done.

Signature 1

ceiling(Numeric $val)

Signature 2

ceiling(String $val)

Returns a new string with the record separator character(s) removed. The record separator is the line ending characters \r and \n.

This function is compatible with the stdlib function with the same name.

The function does the following:

• For a String the conversion removes \r\n, \n or \r from the end of a string.

• For an Iterable[Variant[String, Numeric]] (for example an Array) each value is processed and the conversion is not recursive.

• If the value is Numeric it is simply returned (this is for backwards compatibility).

• An error is raised for all other data types.

"hello\r\n".chomp()
chomp("hello\r\n")

Would both result in "hello"

["hello\r\n", "hi\r\n"].chomp()
chomp(["hello\r\n", "hi\r\n"])

Would both result in ['hello', 'hi']

Signature 1

chomp(Numeric $arg)

Signature 2

chomp(String $arg)

Signature 3

chomp(Iterable[Variant[String, Numeric]] $arg)

Returns a new string with the last character removed. If the string ends with \r\n, both characters are removed. Applying chop to an empty string returns an empty string. If you wish to merely remove record separators then you should use the chomp function.

This function is compatible with the stdlib function with the same name.

The function does the following:

• For a String the conversion removes the last character, or if it ends with \r\n` it removes both. If String is empty an empty string is returned.

• For an Iterable[Variant[String, Numeric]] (for example an Array) each value is processed and the conversion is not recursive.

• If the value is Numeric it is simply returned (this is for backwards compatibility).

• An error is raised for all other data types.

"hello\r\n".chop()
chop("hello\r\n")

Would both result in "hello"

"hello".chop()
chop("hello")

Would both result in "hell"

["hello\r\n", "hi\r\n"].chop()
chop(["hello\r\n", "hi\r\n"])

Would both result in ['hello', 'hi']

Signature 1

chop(Numeric $arg)

Signature 2

chop(String $arg)

Signature 3

chop(Iterable[Variant[String, Numeric]] $arg)

Compares two values and returns -1, 0 or 1 if first value is smaller, equal or larger than the second value. The compare function accepts arguments of the data types String, Numeric, Timespan, Timestamp, and Semver, such that:

• two of the same data type can be compared

• Timespan and Timestamp can be compared with each other and with Numeric

When comparing two String values the comparison can be made to consider case by passing a third (optional) boolean false value - the default is true which ignores case as the comparison operators in the Puppet Language.

Signature 1

compare(Numeric $a, Numeric $b)

Signature 2

compare(String $a, String $b, Optional[Boolean] $ignore_case)

Signature 3

compare(Semver $a, Semver $b)

Signature 4

compare(Numeric $a, Variant[Timespan, Timestamp] $b)

Signature 5

compare(Timestamp $a, Variant[Timestamp, Numeric] $b)

Signature 6

compare(Timespan $a, Variant[Timespan, Numeric] $b)

Makes one or more classes be contained inside the current class. If any of these classes are undeclared, they will be declared as if there were declared with the include function. Accepts a class name, an array of class names, or a comma-separated list of class names.

A contained class will not be applied before the containing class is begun, and will be finished before the containing class is finished.

You must use the class's full name; relative names are not allowed. In addition to names in string form, you may also directly use Class and Resource Type-values that are produced by evaluating resource and relationship expressions.

The function returns an array of references to the classes that were contained thus allowing the function call to contain to directly continue.

• Since 4.0.0 support for Class and Resource Type-values, absolute names

• Since 4.7.0 a value of type Array[Type[Class[n]]] is returned with all the contained classes

contain(Any *$names)

The convert_to(value, type) is a convenience function that does the same as new(type, value). The difference in the argument ordering allows it to be used in chained style for improved readability "left to right".

When the function is given a lambda, it is called with the converted value, and the function returns what the lambda returns, otherwise the converted value.

  # The harder to read variant:
  # Using new operator - that is "calling the type" with operator ()
  Hash(Array("abc").map |$i,$v| { [$i, $v] })

  # The easier to read variant:
  # using 'convert_to'
  "abc".convert_to(Array).map |$i,$v| { [$i, $v] }.convert_to(Hash)

convert_to(Any $value, Type $type, Optional[Any] *$args, Optional[Callable[1,1]] &$block)

Converts a hash into a set of resources and adds them to the catalog.

Note: Use this function selectively. It's generally better to write resources in Puppet, as resources created with create_resource are difficult to read and troubleshoot.

This function takes two mandatory arguments: a resource type, and a hash describing a set of resources. The hash should be in the form {title => {parameters} }:

# A hash of user resources:
$myusers = {
  'nick' => { uid    => '1330',
              gid    => allstaff,
              groups => ['developers', 'operations', 'release'], },
  'dan'  => { uid    => '1308',
              gid    => allstaff,
              groups => ['developers', 'prosvc', 'release'], },
}

create_resources(user, $myusers)

A third, optional parameter may be given, also as a hash:

$defaults = {
  'ensure'   => present,
  'provider' => 'ldap',
}

create_resources(user, $myusers, $defaults)

The values given on the third argument are added to the parameters of each resource present in the set given on the second argument. If a parameter is present on both the second and third arguments, the one on the second argument takes precedence.

This function can be used to create defined resources and classes, as well as native resources.

Virtual and Exported resources may be created by prefixing the type name with @ or @@ respectively. For example, the $myusers hash may be exported in the following manner:

create_resources("@@user", $myusers)

The $myusers may be declared as virtual resources using:

create_resources("@user", $myusers)

Note that create_resources filters out parameter values that are undef so that normal data binding and Puppet default value expressions are considered (in that order) for the final value of a parameter (just as when setting a parameter to undef in a Puppet language resource declaration).

create_resources()

Logs a message on the server at level crit.

crit(Any *$values)

Logs a message on the server at level debug.

debug(Any *$values)

Determines whether a given class or resource type is defined and returns a Boolean value. You can also use defined to determine whether a specific resource is defined, or whether a variable has a value (including undef, as opposed to the variable never being declared or assigned).

This function takes at least one string argument, which can be a class name, type name, resource reference, or variable reference of the form '$name'. (Note that the $ sign is included in the string which must be in single quotes to prevent the $ character to be interpreted as interpolation.

The defined function checks both native and defined types, including types provided by modules. Types and classes are matched by their names. The function matches resource declarations by using resource references.

# Matching resource types
defined("file")
defined("customtype")

# Matching defines and classes
defined("foo")
defined("foo::bar")

# Matching variables (note the single quotes)
defined('$name')

# Matching declared resources
defined(File['/tmp/file'])

Puppet depends on the configuration's evaluation order when checking whether a resource is declared.

# Assign values to $is_defined_before and $is_defined_after using identical `defined`
# functions.

$is_defined_before = defined(File['/tmp/file'])

file { "/tmp/file":
  ensure => present,
}

$is_defined_after = defined(File['/tmp/file'])

# $is_defined_before returns false, but $is_defined_after returns true.

This order requirement only refers to evaluation order. The order of resources in the configuration graph (e.g. with before or require) does not affect the defined function's behavior.

Warning: Avoid relying on the result of the defined function in modules, as you might not be able to guarantee the evaluation order well enough to produce consistent results. This can cause other code that relies on the function's result to behave inconsistently or fail.

If you pass more than one argument to defined, the function returns true if any of the arguments are defined. You can also match resources by type, allowing you to match conditions of different levels of specificity, such as whether a specific resource is of a specific data type.

file { "/tmp/file1":
  ensure => file,
}

$tmp_file = file { "/tmp/file2":
  ensure => file,
}

# Each of these statements return `true` ...
defined(File['/tmp/file1'])
defined(File['/tmp/file1'],File['/tmp/file2'])
defined(File['/tmp/file1'],File['/tmp/file2'],File['/tmp/file3'])
# ... but this returns `false`.
defined(File['/tmp/file3'])

# Each of these statements returns `true` ...
defined(Type[Resource['file','/tmp/file2']])
defined(Resource['file','/tmp/file2'])
defined(File['/tmp/file2'])
defined('$tmp_file')
# ... but each of these returns `false`.
defined(Type[Resource['exec','/tmp/file2']])
defined(Resource['exec','/tmp/file2'])
defined(File['/tmp/file3'])
defined('$tmp_file2')

defined(Variant[String, Type[CatalogEntry], Type[Type[CatalogEntry]]] *$vals)

Returns a value for a sequence of given keys/indexes into a structure, such as an array or hash.

This function is used to "dig into" a complex data structure by using a sequence of keys / indexes to access a value from which the next key/index is accessed recursively.

The first encountered undef value or key stops the "dig" and undef is returned.

An error is raised if an attempt is made to "dig" into something other than an undef (which immediately returns undef), an Array or a Hash.

$data = {a => { b => [{x => 10, y => 20}, {x => 100, y => 200}]}}
notice $data.dig('a', 'b', 1, 'x')

Would notice the value 100.

This is roughly equivalent to $data['a']['b'][1]['x']. However, a standard index will return an error and cause catalog compilation failure if any parent of the final key ('x') is undef. The dig function will return undef, rather than failing catalog compilation. This allows you to check if data exists in a structure without mandating that it always exists.

dig(Optional[Collection] $data, Any *$arg)

Returns a hash value from a provided string using the digest_algorithm setting from the Puppet config file.

digest()

Converts a String, Array or Hash (recursively) into lower case.

This function is compatible with the stdlib function with the same name.

The function does the following:

• For a String, its lower case version is returned. This is done using Ruby system locale which handles some, but not all special international up-casing rules (for example German double-s ß is upcased to "SS", whereas upper case double-s is downcased to ß).

• For Array and Hash the conversion to lower case is recursive and each key and value must be convertible by this function.

• When a Hash is converted, some keys could result in the same key - in those cases, the latest key-value wins. For example if keys "aBC", and "abC" where both present, after downcase there would only be one key "abc".

• If the value is Numeric it is simply returned (this is for backwards compatibility).

• An error is raised for all other data types.

Please note: This function relies directly on Ruby's String implementation and as such may not be entirely UTF8 compatible. To ensure best compatibility please use this function with Ruby 2.4.0 or greater - https://bugs.ruby-lang.org/issues/10085.

'HELLO'.downcase()
downcase('HEllO')

Would both result in "hello"

['A', 'B'].downcase()
downcase(['A', 'B'])

Would both result in ['a', 'b']

{'A' => 'HEllO', 'B' => 'GOODBYE'}.downcase()

Would result in {'a' => 'hello', 'b' => 'goodbye'}

['A', 'B', ['C', ['D']], {'X' => 'Y'}].downcase

Would result in ['a', 'b', ['c', ['d']], {'x' => 'y'}]

Signature 1

downcase(Numeric $arg)

Signature 2

downcase(String $arg)

Signature 3

downcase(Array[StringData] $arg)

Signature 4

downcase(Hash[StringData, StringData] $arg)

Runs a lambda repeatedly using each value in a data structure, then returns the values unchanged.

This function takes two mandatory arguments, in this order:

1. An array, hash, or other iterable object that the function will iterate over.

2. A lambda, which the function calls for each element in the first argument. It can request one or two parameters.

$data.each |$parameter| { <PUPPET CODE BLOCK> }

or

each($data) |$parameter| { <PUPPET CODE BLOCK> }

When the first argument ($data in the above example) is an array, Puppet passes each value in turn to the lambda, then returns the original values.

# For the array $data, run a lambda that creates a resource for each item.
$data = ["routers", "servers", "workstations"]
$data.each |$item| {
 notify { $item:
   message => $item
 }
}
# Puppet creates one resource for each of the three items in $data. Each resource is
# named after the item's value and uses the item's value in a parameter.

When the first argument is a hash, Puppet passes each key and value pair to the lambda as an array in the form [key, value] and returns the original hash.

# For the hash $data, run a lambda using each item as a key-value array that creates a
# resource for each item.
$data = {"rtr" => "Router", "svr" => "Server", "wks" => "Workstation"}
$data.each |$items| {
 notify { $items[0]:
   message => $items[1]
 }
}
# Puppet creates one resource for each of the three items in $data, each named after the
# item's key and containing a parameter using the item's value.

When the first argument is an array and the lambda has two parameters, Puppet passes the array's indexes (enumerated from 0) in the first parameter and its values in the second parameter.

# For the array $data, run a lambda using each item's index and value that creates a
# resource for each item.
$data = ["routers", "servers", "workstations"]
$data.each |$index, $value| {
 notify { $value:
   message => $index
 }
}
# Puppet creates one resource for each of the three items in $data, each named after the
# item's value and containing a parameter using the item's index.

When the first argument is a hash, Puppet passes its keys to the first parameter and its values to the second parameter.

# For the hash $data, run a lambda using each item's key and value to create a resource
# for each item.
$data = {"rtr" => "Router", "svr" => "Server", "wks" => "Workstation"}
$data.each |$key, $value| {
 notify { $key:
   message => $value
 }
}
# Puppet creates one resource for each of the three items in $data, each named after the
# item's key and containing a parameter using the item's value.

For an example that demonstrates how to create multiple file resources using each, see the Puppet iteration documentation.

Signature 1

each(Hash[Any, Any] $hash, Callable[2,2] &$block)

Signature 2

each(Hash[Any, Any] $hash, Callable[1,1] &$block)

Signature 3

each(Iterable $enumerable, Callable[2,2] &$block)

Signature 4

each(Iterable $enumerable, Callable[1,1] &$block)

Logs a message on the server at level emerg.

emerg(Any *$values)

Returns true if the given argument is an empty collection of values.

This function can answer if one of the following is empty:

• Array, Hash - having zero entries

• String, Binary - having zero length

For backwards compatibility with the stdlib function with the same name the following data types are also accepted by the function instead of raising an error. Using these is deprecated and will raise a warning:

• Numeric - false is returned for all Numeric values.

• Undef - true is returned for all Undef values.

notice([].empty)
notice(empty([]))
# would both notice 'true'

Signature 1

empty(Collection $coll)

Signature 2

empty(Sensitive[String] $str)

Signature 3

empty(String $str)

Signature 4

empty(Numeric $num)

Signature 5

empty(Binary $bin)

Signature 6

empty(Undef $x)

Evaluates an Embedded Puppet (EPP) template file and returns the rendered text result as a String.

epp('<MODULE NAME>/<TEMPLATE FILE>', <PARAMETER HASH>)

The first argument to this function should be a <MODULE NAME>/<TEMPLATE FILE> reference, which loads <TEMPLATE FILE> from <MODULE NAME>'s templates directory. In most cases, the last argument is optional; if used, it should be a hash that contains parameters to pass to the template.

• See the template documentation for general template usage information.

• See the EPP syntax documentation for examples of EPP.

For example, to call the apache module's templates/vhost/_docroot.epp template and pass the docroot and virtual_docroot parameters, call the epp function like this:

epp('apache/vhost/_docroot.epp', { 'docroot' => '/var/www/html', 'virtual_docroot' => '/var/www/example' })

This function can also accept an absolute path, which can load a template file from anywhere on disk.

Puppet produces a syntax error if you pass more parameters than are declared in the template's parameter tag. When passing parameters to a template that contains a parameter tag, use the same names as the tag's declared parameters.

Parameters are required only if they are declared in the called template's parameter tag without default values. Puppet produces an error if the epp function fails to pass any required parameter.

epp(String $path, Optional[Hash[Pattern[/^\w+$/], Any]] $parameters)

Logs a message on the server at level err.

err(Any *$values)

The eyaml_lookup_key is a hiera 5 lookup_key data provider function. See the configuration guide documentation for how to use this function.

eyaml_lookup_key(String[1] $key, Hash[String[1],Any] $options, Puppet::LookupContext $context)

Fail with a parse error. Any parameters will be stringified, concatenated, and passed to the exception-handler.

fail()

Loads a file from a module and returns its contents as a string.

The argument to this function should be a <MODULE NAME>/<FILE> reference, which will load <FILE> from a module's files directory. (For example, the reference mysql/mysqltuner.pl will load the file <MODULES DIRECTORY>/mysql/files/mysqltuner.pl.)

This function can also accept:

• An absolute path, which can load a file from anywhere on disk.

• Multiple arguments, which will return the contents of the first file found, skipping any files that don't exist.

file()

Applies a lambda to every value in a data structure and returns an array or hash containing any elements for which the lambda evaluates to a truthy value (not false or undef).

This function takes two mandatory arguments, in this order:

1. An array, hash, or other iterable object that the function will iterate over.

2. A lambda, which the function calls for each element in the first argument. It can request one or two parameters.

$filtered_data = $data.filter |$parameter| { <PUPPET CODE BLOCK> }

or

$filtered_data = filter($data) |$parameter| { <PUPPET CODE BLOCK> }

When the first argument ($data in the above example) is an array, Puppet passes each value in turn to the lambda and returns an array containing the results.

# For the array $data, return an array containing the values that end with "berry"
$data = ["orange", "blueberry", "raspberry"]
$filtered_data = $data.filter |$items| { $items =~ /berry$/ }
# $filtered_data = [blueberry, raspberry]

When the first argument is a hash, Puppet passes each key and value pair to the lambda as an array in the form [key, value] and returns a hash containing the results.

# For the hash $data, return a hash containing all values of keys that end with "berry"
$data = { "orange" => 0, "blueberry" => 1, "raspberry" => 2 }
$filtered_data = $data.filter |$items| { $items[0] =~ /berry$/ }
# $filtered_data = {blueberry => 1, raspberry => 2}

When the first argument is an array and the lambda has two parameters, Puppet passes the array's indexes (enumerated from 0) in the first parameter and its values in the second parameter.

# For the array $data, return an array of all keys that both end with "berry" and have
# an even-numbered index
$data = ["orange", "blueberry", "raspberry"]
$filtered_data = $data.filter |$indexes, $values| { $indexes % 2 == 0 and $values =~ /berry$/ }
# $filtered_data = [raspberry]

When the first argument is a hash, Puppet passes its keys to the first parameter and its values to the second parameter.

# For the hash $data, return a hash of all keys that both end with "berry" and have
# values less than or equal to 1
$data = { "orange" => 0, "blueberry" => 1, "raspberry" => 2 }
$filtered_data = $data.filter |$keys, $values| { $keys =~ /berry$/ and $values <= 1 }
# $filtered_data = {blueberry => 1}

Signature 1

filter(Hash[Any, Any] $hash, Callable[2,2] &$block)

Signature 2

filter(Hash[Any, Any] $hash, Callable[1,1] &$block)

Signature 3

filter(Iterable $enumerable, Callable[2,2] &$block)

Signature 4

filter(Iterable $enumerable, Callable[1,1] &$block)

Finds an existing file from a module and returns its path.

This function accepts an argument that is a String as a <MODULE NAME>/<FILE> reference, which searches for <FILE> relative to a module's files directory. (For example, the reference mysql/mysqltuner.pl will search for the file <MODULES DIRECTORY>/mysql/files/mysqltuner.pl.)

If this function is run via puppet agent, it checks for file existence on the Puppet Primary server. If run via puppet apply, it checks on the local host. In both cases, the check is performed before any resources are changed.

This function can also accept:

• An absolute String path, which checks for the existence of a file from anywhere on disk.

• Multiple String arguments, which returns the path of the first file found, skipping nonexistent files.

• An array of string paths, which returns the path of the first file found from the given paths in the array, skipping nonexistent files.

The function returns undef if none of the given paths were found.

Signature 1

find_file(String *$paths)

Signature 2

find_file(Array[String] *$paths_array)

Finds an existing template from a module and returns its path.

This function accepts an argument that is a String as a <MODULE NAME>/<TEMPLATE> reference, which searches for <TEMPLATE> relative to a module's templates directory on the primary server. (For example, the reference mymod/secret.conf.epp will search for the file <MODULES DIRECTORY>/mymod/templates/secret.conf.epp.)

The primary use case is for agent-side template rendering with late-bound variables resolved, such as from secret stores inaccessible to the primary server, such as

$variables = {
  'password' => Deferred('vault_lookup::lookup',
                  ['secret/mymod', 'https://vault.example.com:8200']),
}

# compile the template source into the catalog
file { '/etc/secrets.conf':
  ensure  => file,
  content => Deferred('inline_epp',
               [find_template('mymod/secret.conf.epp').file, $variables]),
}

This function can also accept:

• An absolute String path, which checks for the existence of a template from anywhere on disk.

• Multiple String arguments, which returns the path of the first template found, skipping nonexistent files.

• An array of string paths, which returns the path of the first template found from the given paths in the array, skipping nonexistent files.

The function returns undef if none of the given paths were found.

Signature 1

find_template(String *$paths)

Signature 2

find_template(Array[String] *$paths_array)

Returns a flat Array produced from its possibly deeply nested given arguments.

One or more arguments of any data type can be given to this function. The result is always a flat array representation where any nested arrays are recursively flattened.

flatten(['a', ['b', ['c']]])
# Would return: ['a','b','c']

To flatten other kinds of iterables (for example hashes, or intermediate results like from a reverse_each) first convert the result to an array using Array($x), or $x.convert_to(Array). See the new function for details and options when performing a conversion.

$hsh = { a => 1, b => 2}

# -- without conversion
$hsh.flatten()
# Would return [{a => 1, b => 2}]

# -- with conversion
$hsh.convert_to(Array).flatten()
# Would return [a,1,b,2]

flatten(Array($hsh))
# Would also return [a,1,b,2]

$a1 = [1, [2, 3]]
$a2 = [[4,[5,6]]
$x = 7
flatten($a1, $a2, $x)
# would return [1,2,3,4,5,6,7]

flatten(42)
# Would return [42]

flatten([42])
# Would also return [42]

flatten(Any *$args)

Returns the largest Integer less or equal to the argument. Takes a single numeric value as an argument.

This function is backwards compatible with the same function in stdlib and accepts a Numeric value. A String that can be converted to a floating point number can also be used in this version - but this is deprecated.

In general convert string input to Numeric before calling this function to have full control over how the conversion is done.

Signature 1

floor(Numeric $val)

Signature 2

floor(String $val)

Usage: fqdn_rand(MAX, [SEED], [DOWNCASE]). MAX is required and must be a positive integer; SEED is optional and may be any number or string; DOWNCASE is optional and should be a boolean true or false.

Generates a random Integer number greater than or equal to 0 and less than MAX, combining the $fqdn fact and the value of SEED for repeatable randomness. (That is, each node will get a different random number from this function, but a given node's result will be the same every time unless its hostname changes.) If DOWNCASE is true, then the fqdn fact will be downcased when computing the value so that the result is not sensitive to the case of the fqdn fact.

This function is usually used for spacing out runs of resource-intensive cron tasks that run on many nodes, which could cause a thundering herd or degrade other services if they all fire at once. Adding a SEED can be useful when you have more than one such task and need several unrelated random numbers per node. (For example, fqdn_rand(30), fqdn_rand(30, 'expensive job 1'), and fqdn_rand(30, 'expensive job 2') will produce totally different numbers.)

fqdn_rand()

Calls an external command on the Puppet master and returns the results of the command. Any arguments are passed to the external command as arguments. If the generator does not exit with return code of 0, the generator is considered to have failed and a parse error is thrown. Generators can only have file separators, alphanumerics, dashes, and periods in them. This function will attempt to protect you from malicious generator calls (e.g., those with '..' in them), but it can never be entirely safe. No subshell is used to execute generators, so all shell metacharacters are passed directly to the generator, and all metacharacters are returned by the function. Consider cleaning white space from any string generated.

generate()

Digs into a value with dot notation to get a value from within a structure.

To dig into a given value, call the function with (at least) two arguments:

• The first argument must be an Array, or Hash. Value can also be undef (which also makes the result undef unless a default value is given).

• The second argument must be a dot notation navigation string.

• The optional third argument can be any type of value and it is used as the default value if the function would otherwise return undef.

• An optional lambda for error handling taking one Error argument.

Dot notation navigation string - The dot string consists of period . separated segments where each segment is either the index into an array or the value of a hash key. If a wanted key contains a period it must be quoted to avoid it being taken as a segment separator. Quoting can be done with either single quotes ' or double quotes ". If a segment is a decimal number it is converted to an Integer index. This conversion can be prevented by quoting the value.

#get($facts, 'os.family')
$facts.get('os.family')

Would both result in the value of $facts['os']['family']

get([1,2,[{'name' =>'waldo'}]], '2.0.name')

Would result in 'waldo'

get([1,2,[{'name' =>'waldo'}]], '2.1.name', 'not waldo')

Would result in 'not waldo'

$x = [1, 2, { 'readme.md' => "This is a readme."}]
$x.get('2."readme.md"')

$x = [1, 2, { '10' => "ten"}]
$x.get('2."0"')

Error Handling - There are two types of common errors that can be handled by giving the function a code block to execute. (A third kind or error; when the navigation string has syntax errors (for example an empty segment or unbalanced quotes) will always raise an error).

The given block will be given an instance of the Error data type, and it has methods to extract msg, issue_code, kind, and details.

The msg will be a preformatted message describing the error. This is the error message that would have surfaced if there was no block to handle the error.

The kind is the string 'SLICE_ERROR' for both kinds of errors, and the issue_code is either the string 'EXPECTED_INTEGER_INDEX' for an attempt to index into an array with a String, or 'EXPECTED_COLLECTION' for an attempt to index into something that is not a Collection.

The details is a Hash that for both issue codes contain the entry 'walked_path' which is an Array with each key in the progression of the dig up to the place where the error occurred.

For an EXPECTED_INTEGER_INDEX-issue the detail 'index_type' is set to the data type of the index value and for an 'EXPECTED_COLLECTION'-issue the detail 'value_type' is set to the type of the value.

The logic in the error handling block can inspect the details, and either call fail() with a custom error message or produce the wanted value.

If the block produces undef it will not be replaced with a given default value.

$x = 'blue'
$x.get('0.color', 'green') |$error| { undef } # result is undef

$y = ['blue']
$y.get('color', 'green') |$error| { undef } # result is undef

$x = [1, 2, ['blue']]
$x.get('2.color') |$error| {
  notice("Walked path is ${error.details['walked_path']}")
}

Would notice Walked path is [2, color]

Also see:

• getvar() that takes the first segment to be the name of a variable and then delegates to this function.

• dig() function which is similar but uses an array of navigation values instead of a dot notation string.

get(Any $value, String $dotted_string, Optional[Any] $default_value, Optional[Callable[1,1]] &$block)

Digs into a variable with dot notation to get a value from a structure.

To get the value from a variable (that may or may not exist), call the function with one or two arguments:

• The first argument must be a string, and must start with a variable name without leading $, for example get('facts'). The variable name can be followed by a dot notation navigation string to dig out a value in the array or hash value of the variable.

• The optional second argument can be any type of value and it is used as the default value if the function would otherwise return undef.

• An optional lambda for error handling taking one Error argument.

Dot notation navigation string - The dot string consists of period . separated segments where each segment is either the index into an array or the value of a hash key. If a wanted key contains a period it must be quoted to avoid it being taken as a segment separator. Quoting can be done with either single quotes ' or double quotes ". If a segment is a decimal number it is converted to an Integer index. This conversion can be prevented by quoting the value.

getvar('facts') # results in the value of $facts

getvar('facts.os.family') # results in the value of $facts['os']['family']

$x = [1,2,[{'name' =>'waldo'}]]
getvar('x.2.1.name', 'not waldo')
# results in 'not waldo'

For further examples and how to perform error handling, see the get() function which this function delegates to after having resolved the variable value.

getvar(Pattern[/\A(?:::)?(?:[a-z]\w*::)*[a-z_]\w*(?:.|\Z)/] $get_string, Optional[Any] $default_value, Optional[Callable[1,1]] &$block)

Groups the collection by result of the block. Returns a hash where the keys are the evaluated result from the block and the values are arrays of elements in the collection that correspond to the key.

Signature 1

group_by(Collection $collection, Callable[1,1] &$block)

Performs a standard priority lookup of the hierarchy and returns the most specific value for a given key. The returned value can be any type of data.

This function is deprecated in favor of the lookup function. While this function continues to work, it does not support:

• lookup_options stored in the data

• lookup across global, environment, and module layers

The function takes up to three arguments, in this order:

1. A string key that Hiera searches for in the hierarchy. Required.

2. An optional default value to return if Hiera doesn't find anything matching the key.

   • If this argument isn't provided and this function results in a lookup failure, Puppet fails with a compilation error.

3. The optional name of an arbitrary hierarchy level to insert at the top of the hierarchy. This lets you temporarily modify the hierarchy for a single lookup.

   • If Hiera doesn't find a matching key in the overriding hierarchy level, it continues searching the rest of the hierarchy.

The hiera function does not find all matches throughout a hierarchy, instead returning the first specific value starting at the top of the hierarchy. To search throughout a hierarchy, use the hiera_array or hiera_hash functions.

# Assuming hiera.yaml
# :hierarchy:
#   - web01.example.com
#   - common

# Assuming web01.example.com.yaml:
# users:
#   - "Amy Barry"
#   - "Carrie Douglas"

# Assuming common.yaml:
users:
  admins:
    - "Edith Franklin"
    - "Ginny Hamilton"
  regular:
    - "Iris Jackson"
    - "Kelly Lambert"

# Assuming we are not web01.example.com:

$users = hiera('users', undef)

# $users contains {admins  => ["Edith Franklin", "Ginny Hamilton"],
#                  regular => ["Iris Jackson", "Kelly Lambert"]}

You can optionally generate the default value with a lambda that takes one parameter.

# Assuming the same Hiera data as the previous example:

$users = hiera('users') | $key | { "Key \'${key}\' not found" }

# $users contains {admins  => ["Edith Franklin", "Ginny Hamilton"],
#                  regular => ["Iris Jackson", "Kelly Lambert"]}
# If hiera couldn't match its key, it would return the lambda result,
# "Key 'users' not found".

The returned value's data type depends on the types of the results. In the example above, Hiera matches the 'users' key and returns it as a hash.

See the 'Using the lookup function' documentation for how to perform lookup of data. Also see the 'Using the deprecated hiera functions' documentation for more information about the Hiera 3 functions.

hiera()

Finds all matches of a key throughout the hierarchy and returns them as a single flattened array of unique values. If any of the matched values are arrays, they're flattened and included in the results. This is called an array merge lookup.

This function is deprecated in favor of the lookup function. While this function continues to work, it does not support:

• lookup_options stored in the data

• lookup across global, environment, and module layers

The hiera_array function takes up to three arguments, in this order:

1. A string key that Hiera searches for in the hierarchy. Required.

2. An optional default value to return if Hiera doesn't find anything matching the key.

   • If this argument isn't provided and this function results in a lookup failure, Puppet fails with a compilation error.

3. The optional name of an arbitrary hierarchy level to insert at the top of the hierarchy. This lets you temporarily modify the hierarchy for a single lookup.

   • If Hiera doesn't find a matching key in the overriding hierarchy level, it continues searching the rest of the hierarchy.

# Assuming hiera.yaml
# :hierarchy:
#   - web01.example.com
#   - common

# Assuming common.yaml:
# users:
#   - 'cdouglas = regular'
#   - 'efranklin = regular'

# Assuming web01.example.com.yaml:
# users: 'abarry = admin'

$allusers = hiera_array('users', undef)

# $allusers contains ["cdouglas = regular", "efranklin = regular", "abarry = admin"].

You can optionally generate the default value with a lambda that takes one parameter.

# Assuming the same Hiera data as the previous example:

$allusers = hiera_array('users') | $key | { "Key \'${key}\' not found" }

# $allusers contains ["cdouglas = regular", "efranklin = regular", "abarry = admin"].
# If hiera_array couldn't match its key, it would return the lambda result,
# "Key 'users' not found".

hiera_array expects that all values returned will be strings or arrays. If any matched value is a hash, Puppet raises a type mismatch error.

See the 'Using the lookup function' documentation for how to perform lookup of data. Also see the 'Using the deprecated hiera functions' documentation for more information about the Hiera 3 functions.

hiera_array()

Finds all matches of a key throughout the hierarchy and returns them in a merged hash.

This function is deprecated in favor of the lookup function. While this function continues to work, it does not support:

• lookup_options stored in the data

• lookup across global, environment, and module layers

If any of the matched hashes share keys, the final hash uses the value from the highest priority match. This is called a hash merge lookup.

The merge strategy is determined by Hiera's :merge_behavior setting.

The hiera_hash function takes up to three arguments, in this order:

1. A string key that Hiera searches for in the hierarchy. Required.

2. An optional default value to return if Hiera doesn't find anything matching the key.

   • If this argument isn't provided and this function results in a lookup failure, Puppet fails with a compilation error.

3. The optional name of an arbitrary hierarchy level to insert at the top of the hierarchy. This lets you temporarily modify the hierarchy for a single lookup.

   • If Hiera doesn't find a matching key in the overriding hierarchy level, it continues searching the rest of the hierarchy.

# Assuming hiera.yaml
# :hierarchy:
#   - web01.example.com
#   - common

# Assuming common.yaml:
# users:
#   regular:
#     'cdouglas': 'Carrie Douglas'

# Assuming web01.example.com.yaml:
# users:
#   administrators:
#     'aberry': 'Amy Berry'

# Assuming we are not web01.example.com:

$allusers = hiera_hash('users', undef)

# $allusers contains {regular => {"cdouglas" => "Carrie Douglas"},
#                     administrators => {"aberry" => "Amy Berry"}}

You can optionally generate the default value with a lambda that takes one parameter.

# Assuming the same Hiera data as the previous example:

$allusers = hiera_hash('users') | $key | { "Key \'${key}\' not found" }

# $allusers contains {regular => {"cdouglas" => "Carrie Douglas"},
#                     administrators => {"aberry" => "Amy Berry"}}
# If hiera_hash couldn't match its key, it would return the lambda result,
# "Key 'users' not found".

hiera_hash expects that all values returned will be hashes. If any of the values found in the data sources are strings or arrays, Puppet raises a type mismatch error.

See the 'Using the lookup function' documentation for how to perform lookup of data. Also see the 'Using the deprecated hiera functions' documentation for more information about the Hiera 3 functions.

hiera_hash()

Assigns classes to a node using an array merge lookup that retrieves the value for a user-specified key from Hiera's data.

This function is deprecated in favor of the lookup function in combination with include. While this function continues to work, it does not support:

• lookup_options stored in the data

• lookup across global, environment, and module layers

# In site.pp, outside of any node definitions and below any top-scope variables:
lookup('classes', Array[String], 'unique').include

The hiera_include function requires:

• A string key name to use for classes.

• A call to this function (i.e. hiera_include('classes')) in your environment's sites.pp manifest, outside of any node definitions and below any top-scope variables that Hiera uses in lookups.

• classes keys in the appropriate Hiera data sources, with an array for each classes key and each value of the array containing the name of a class.

The function takes up to three arguments, in this order:

1. A string key that Hiera searches for in the hierarchy. Required.

2. An optional default value to return if Hiera doesn't find anything matching the key.

   • If this argument isn't provided and this function results in a lookup failure, Puppet fails with a compilation error.

3. The optional name of an arbitrary hierarchy level to insert at the top of the hierarchy. This lets you temporarily modify the hierarchy for a single lookup.

   • If Hiera doesn't find a matching key in the overriding hierarchy level, it continues searching the rest of the hierarchy.

The function uses an array merge lookup to retrieve the classes array, so every node gets every class from the hierarchy.

# Assuming hiera.yaml
# :hierarchy:
#   - web01.example.com
#   - common

# Assuming web01.example.com.yaml:
# classes:
#   - apache::mod::php

# Assuming common.yaml:
# classes:
#   - apache

# In site.pp, outside of any node definitions and below any top-scope variables:
hiera_include('classes', undef)

# Puppet assigns the apache and apache::mod::php classes to the web01.example.com node.

You can optionally generate the default value with a lambda that takes one parameter.

# Assuming the same Hiera data as the previous example:

# In site.pp, outside of any node definitions and below any top-scope variables:
hiera_include('classes') | $key | {"Key \'${key}\' not found" }

# Puppet assigns the apache and apache::mod::php classes to the web01.example.com node.
# If hiera_include couldn't match its key, it would return the lambda result,
# "Key 'classes' not found".

See the 'Using the lookup function' documentation for how to perform lookup of data. Also see the 'Using the deprecated hiera functions' documentation for more information about the Hiera 3 functions.

hiera_include()

The hocon_data is a hiera 5 data_hash data provider function. See the configuration guide documentation for how to use this function.

Note that this function is not supported without a hocon library being present.

hocon_data(Struct[{path=>String[1]}] $options, Puppet::LookupContext $context)

The import function raises an error when called to inform the user that import is no longer supported.

import(Any *$args)

Declares one or more classes, causing the resources in them to be evaluated and added to the catalog. Accepts a class name, an array of class names, or a comma-separated list of class names.

The include function can be used multiple times on the same class and will only declare a given class once. If a class declared with include has any parameters, Puppet will automatically look up values for them in Hiera, using <class name>::<parameter name> as the lookup key.

Contrast this behavior with resource-like class declarations (class {'name': parameter => 'value',}), which must be used in only one place per class and can directly set parameters. You should avoid using both include and resource-like declarations with the same class.

The include function does not cause classes to be contained in the class where they are declared. For that, see the contain function. It also does not create a dependency relationship between the declared class and the surrounding class; for that, see the require function.

You must use the class's full name; relative names are not allowed. In addition to names in string form, you may also directly use Class and Resource Type-values that are produced by the resource and relationship expressions.

• Since < 3.0.0

• Since 4.0.0 support for class and resource type values, absolute names

• Since 4.7.0 returns an Array[Type[Class]] of all included classes

include(Any *$names)

Returns the index (or key in a hash) to a first-found value in an Iterable value.

When called with a lambda the lambda is called repeatedly using each value in a data structure until the lambda returns a "truthy" value which makes the function return the index or key, or if the end of the iteration is reached, undef is returned.

This function can be called in two different ways; with a value to be searched for, or with a lambda that determines if an entry in the iterable matches.

When called with a lambda the function takes two mandatory arguments, in this order:

1. An array, hash, string, or other iterable object that the function will iterate over.

2. A lambda, which the function calls for each element in the first argument. It can request one (value) or two (index/key, value) parameters.

$data.index |$parameter| { <PUPPET CODE BLOCK> }

or

index($data) |$parameter| { <PUPPET CODE BLOCK> }

$data = ["routers", "servers", "workstations"]
notice $data.index |$value| { $value == 'servers' } # notices 1
notice $data.index |$value| { $value == 'hosts'  }  # notices undef

$data = {types => ["routers", "servers", "workstations"], colors => ['red', 'blue', 'green']}
notice $data.index |$value| { 'servers' in $value } # notices 'types'
notice $data.index |$value| { 'red' in $value }     # notices 'colors'

Note that the lambda gets the value and not an array with [key, value] as in other iterative functions.

Using a lambda that accepts two values works the same way. The lambda gets the index/key as the first parameter and the value as the second parameter.

# Find the first even numbered index that has a non String value
$data = [key1, 1, 3, 5]
notice $data.index |$idx, $value| { $idx % 2 == 0 and $value !~ String } # notices 2

When called on a String, the lambda is given each character as a value. What is typically wanted is to find a sequence of characters which is achieved by calling the function with a value to search for instead of giving a lambda.

# Find first occurrence of 'ah'
$data = "blablahbleh"
notice $data.index('ah') # notices 5

# Find first occurrence of 'la' or 'le'
$data = "blablahbleh"
notice $data.index(/l(a|e)/ # notices 1

When searching in a String with a given value that is neither String nor Regexp the answer is always undef. When searching in any other iterable, the value is matched against each value in the iteration using strict Ruby == semantics. If Puppet Language semantics are wanted (where string compare is case insensitive) use a lambda and the == operator in Puppet.

$data = ['routers', 'servers', 'WORKstations']
notice $data.index('servers')      # notices 1
notice $data.index('workstations') # notices undef (not matching case)

For an general examples that demonstrates iteration, see the Puppet iteration documentation.

Signature 1

index(Hash[Any, Any] $hash, Callable[2,2] &$block)

Signature 2

index(Hash[Any, Any] $hash, Callable[1,1] &$block)

Signature 3

index(Iterable $enumerable, Callable[2,2] &$block)

Signature 4

index(Iterable $enumerable, Callable[1,1] &$block)

Signature 5

index(String $str, Variant[String,Regexp] $match)

Signature 6

index(Iterable $enumerable, Any $match)

Logs a message on the server at level info.

info(Any *$values)

Evaluates an Embedded Puppet (EPP) template string and returns the rendered text result as a String.

inline_epp('<EPP TEMPLATE STRING>', <PARAMETER HASH>)

The first argument to this function should be a string containing an EPP template. In most cases, the last argument is optional; if used, it should be a hash that contains parameters to pass to the template.

• See the template documentation for general template usage information.

• See the EPP syntax documentation for examples of EPP.

For example, to evaluate an inline EPP template and pass it the docroot and virtual_docroot parameters, call the inline_epp function like this:

inline_epp('docroot: <%= $docroot %> Virtual docroot: <%= $virtual_docroot %>', { 'docroot' => '/var/www/html', 'virtual_docroot' => '/var/www/example' })

Puppet produces a syntax error if you pass more parameters than are declared in the template's parameter tag. When passing parameters to a template that contains a parameter tag, use the same names as the tag's declared parameters.

Parameters are required only if they are declared in the called template's parameter tag without default values. Puppet produces an error if the inline_epp function fails to pass any required parameter.

An inline EPP template should be written as a single-quoted string or heredoc. A double-quoted string is subject to expression interpolation before the string is parsed as an EPP template.

For example, to evaluate an inline EPP template using a heredoc, call the inline_epp function like this:

# Outputs 'Hello given argument planet!'
inline_epp(@(END), { x => 'given argument' })
<%- | $x, $y = planet | -%>
Hello <%= $x %> <%= $y %>!
END

inline_epp(String $template, Optional[Hash[Pattern[/^\w+$/], Any]] $parameters)

Evaluate a template string and return its value. See the templating docs for more information. Note that if multiple template strings are specified, their output is all concatenated and returned as the output of the function.

inline_template()

Joins the values of an Array into a string with elements separated by a delimiter.

Supports up to two arguments

• values - first argument is required and must be an an Array

• delimiter - second arguments is the delimiter between elements, must be a String if given, and defaults to an empty string.

join(['a','b','c'], ",")
# Would result in: "a,b,c"

Note that array is flattened before elements are joined, but flattening does not extend to arrays nested in hashes or other objects.

$a = [1,2, undef, 'hello', [x,y,z], {a => 2, b => [3, 4]}]
notice join($a, ', ')

# would result in noticing:
# 1, 2, , hello, x, y, z, {"a"=>2, "b"=>[3, 4]}

For joining iterators and other containers of elements a conversion must first be made to an Array. The reason for this is that there are many options how such a conversion should be made.

[1,2,3].reverse_each.convert_to(Array).join(', ')
# would result in: "3, 2, 1"

{a => 1, b => 2}.convert_to(Array).join(', ')
# would result in "a, 1, b, 2"

For more detailed control over the formatting (including indentations and line breaks, delimiters around arrays and hash entries, between key/values in hash entries, and individual formatting of values in the array) see the new function for String and its formatting options for Array and Hash.

join(Array $arg, Optional[String] $delimiter)

The json_data is a hiera 5 data_hash data provider function. See the configuration guide documentation for how to use this function.

json_data(Struct[{path=>String[1]}] $options, Puppet::LookupContext $context)

Returns the keys of a hash as an Array

$hsh = {"apples" => 3, "oranges" => 4 }
$hsh.keys()
keys($hsh)
# both results in the array ["apples", "oranges"]

• Note that a hash in the puppet language accepts any data value (including undef) unless it is constrained with a Hash data type that narrows the allowed data types.

• For an empty hash, an empty array is returned.

• The order of the keys is the same as the order in the hash (typically the order in which they were added).

keys(Hash $hsh)

Returns the length of an Array, Hash, String, or Binary value.

The returned value is a positive integer indicating the number of elements in the container; counting (possibly multibyte) characters for a String, bytes in a Binary, number of elements in an Array, and number of key-value associations in a Hash.

"roses".length()        # 5
length("violets")       # 7
[10, 20].length         # 2
{a => 1, b => 3}.length # 2

Signature 1

length(Collection $arg)

Signature 2

length(String $arg)

Signature 3

length(Binary $arg)

Calls a lambda without arguments if the value given to lest is undef. Returns the result of calling the lambda if the argument is undef, otherwise the given argument.

The lest function is useful in a chain of then calls, or in general as a guard against undef values. The function can be used to call fail, or to return a default value.

These two expressions are equivalent:

if $x == undef { do_things() }
lest($x) || { do_things() }

$data = {a => [ b, c ] }
notice $data.dig(a, b, c)
 .then |$x| { $x * 2 }
 .lest || { fail("no value for $data[a][b][c]" }

Would fail the operation because $data[a][b][c] results in undef (there is no b key in a).

In contrast - this example:

$data = {a => { b => { c => 10 } } }
notice $data.dig(a, b, c)
 .then |$x| { $x * 2 }
 .lest || { fail("no value for $data[a][b][c]" }

Would notice the value 20

lest(Any $arg, Callable[0,0] &$block)

Uses the Puppet lookup system to retrieve a value for a given key. By default, this returns the first value found (and fails compilation if no values are available), but you can configure it to merge multiple values into one, fail gracefully, and more.

When looking up a key, Puppet will search up to three tiers of data, in the following order:

1. Hiera.

2. The current environment's data provider.

3. The indicated module's data provider, if the key is of the form <MODULE NAME>::<SOMETHING>.

Strips leading spaces from a String

This function is compatible with the stdlib function with the same name.

The function does the following:

• For a String the conversion removes all leading ASCII white space characters such as space, tab, newline, and return. It does not remove other space-like characters like hard space (Unicode U+00A0). (Tip, /^[[:space:]]/ regular expression matches all space-like characters).

• For an Iterable[Variant[String, Numeric]] (for example an Array) each value is processed and the conversion is not recursive.

• If the value is Numeric it is simply returned (this is for backwards compatibility).

• An error is raised for all other data types.

"\n\thello ".lstrip()
lstrip("\n\thello ")

Would both result in "hello"

["\n\thello ", "\n\thi "].lstrip()
lstrip(["\n\thello ", "\n\thi "])

Would both result in ['hello', 'hi']

Signature 1

lstrip(Numeric $arg)

Signature 2

lstrip(String $arg)

Signature 3

lstrip(Iterable[Variant[String, Numeric]] $arg)

Applies a lambda to every value in a data structure and returns an array containing the results.

This function takes two mandatory arguments, in this order:

1. An array, hash, or other iterable object that the function will iterate over.

2. A lambda, which the function calls for each element in the first argument. It can request one or two parameters.

$transformed_data = $data.map |$parameter| { <PUPPET CODE BLOCK> }

or

$transformed_data = map($data) |$parameter| { <PUPPET CODE BLOCK> }

When the first argument ($data in the above example) is an array, Puppet passes each value in turn to the lambda.

# For the array $data, return an array containing each value multiplied by 10
$data = [1,2,3]
$transformed_data = $data.map |$items| { $items * 10 }
# $transformed_data contains [10,20,30]

When the first argument is a hash, Puppet passes each key and value pair to the lambda as an array in the form [key, value].

# For the hash $data, return an array containing the keys
$data = {'a'=>1,'b'=>2,'c'=>3}
$transformed_data = $data.map |$items| { $items[0] }
# $transformed_data contains ['a','b','c']

When the first argument is an array and the lambda has two parameters, Puppet passes the array's indexes (enumerated from 0) in the first parameter and its values in the second parameter.

# For the array $data, return an array containing the indexes
$data = [1,2,3]
$transformed_data = $data.map |$index,$value| { $index }
# $transformed_data contains [0,1,2]

When the first argument is a hash, Puppet passes its keys to the first parameter and its values to the second parameter.

# For the hash $data, return an array containing each value
$data = {'a'=>1,'b'=>2,'c'=>3}
$transformed_data = $data.map |$key,$value| { $value }
# $transformed_data contains [1,2,3]

Signature 1

map(Hash[Any, Any] $hash, Callable[2,2] &$block)

Signature 2

map(Hash[Any, Any] $hash, Callable[1,1] &$block)

Signature 3

map(Iterable $enumerable, Callable[2,2] &$block)

Signature 4

map(Iterable $enumerable, Callable[1,1] &$block)

Matches a regular expression against a string and returns an array containing the match and any matched capturing groups.

The first argument is a string or array of strings. The second argument is either a regular expression, regular expression represented as a string, or Regex or Pattern data type that the function matches against the first argument.

The returned array contains the entire match at index 0, and each captured group at subsequent index values. If the value or expression being matched is an array, the function returns an array with mapped match results.

If the function doesn't find a match, it returns 'undef'.

$matches = "abc123".match(/[a-z]+[1-9]+/)
# $matches contains [abc123]

$matches = "abc123".match(/([a-z]+)([1-9]+)/)
# $matches contains [abc123, abc, 123]

$matches = ["abc123","def456"].match(/([a-z]+)([1-9]+)/)
# $matches contains [[abc123, abc, 123], [def456, def, 456]]

Signature 1

match(String $string, Variant[Any, Type] $pattern)

Signature 2

match(Array[String] $string, Variant[Any, Type] $pattern)

Returns the highest value among a variable number of arguments. Takes at least one argument.

This function is (with one exception) compatible with the stdlib function with the same name and performs deprecated type conversion before comparison as follows:

• If a value converted to String is an optionally '-' prefixed, string of digits, one optional decimal point, followed by optional decimal digits - then the comparison is performed on the values converted to floating point.

• If a value is not considered convertible to float, it is converted to a String and the comparison is a lexical compare where min is the lexicographical later value.

• A lexicographical compare is performed in a system locale - international characters may therefore not appear in what a user thinks is the correct order.

• The conversion rules apply to values in pairs - the rule must hold for both values - a value may therefore be compared using different rules depending on the "other value".

• The returned result found to be the "highest" is the original unconverted value.

The above rules have been deprecated in Puppet 6.0.0 as they produce strange results when given values of mixed data types. In general, either convert values to be all String or all Numeric values before calling the function, or call the function with a lambda that performs type conversion and comparison. This because one simply cannot compare Boolean with Regexp and with any arbitrary Array, Hash or Object and getting a meaningful result.

The one change in the function's behavior is when the function is given a single array argument. The stdlib implementation would return that array as the result where it now instead returns the max value from that array.

notice(max(1)) # would notice 1
notice(max(1,2)) # would notice 2
notice(max("1", 2)) # would notice 2
notice(max("0777", 512)) # would notice "0777", since "0777" is not converted from octal form
notice(max(0777, 512)) # would notice 512, since 0777 is decimal 511
notice(max('aa', 'ab')) # would notice 'ab'
notice(max(['a'], ['b'])) # would notice ['b'], since "['b']" is after "['a']"

$x = [1,2,3,4]
notice(max(*$x)) # would notice 4

$x = [1,2,3,4]
notice(max($x)) # would notice 4
notice($x.max) # would notice 4

This example shows that a single array argument is used as the set of values as opposed to being a single returned value.

When calling with a lambda, it must accept two variables and it must return one of -1, 0, or 1 depending on if first argument is before/lower than, equal to, or higher/after the second argument.

notice(max("2", "10", "100") |$a, $b| { compare($a, $b) })

Would notice "2" as higher since it is lexicographically higher/after the other values. Without the lambda the stdlib compatible (deprecated) behavior would have been to return "100" since number conversion kicks in.

Signature 1

max(Numeric *$values)

Signature 2

max(String *$values)

Signature 3

max(Semver *$values)

Signature 4

max(Timespan *$values)

Signature 5

max(Timestamp *$values)

Signature 6

max(Array[Numeric] $values, Optional[Callable[2,2]] &$block)

Signature 7

max(Array[String] $values, Optional[Callable[2,2]] &$block)

Signature 8

max(Array[Semver] $values, Optional[Callable[2,2]] &$block)

Signature 9

max(Array[Timespan] $values, Optional[Callable[2,2]] &$block)

Signature 10

max(Array[Timestamp] $values, Optional[Callable[2,2]] &$block)

Signature 11

max(Array $values, Optional[Callable[2,2]] &$block)

Signature 12

max(Any *$values, Callable[2,2] &$block)

Signature 13

max(Any *$values)

Returns a MD5 hash value from a provided string.

md5()

Returns the lowest value among a variable number of arguments. Takes at least one argument.

This function is (with one exception) compatible with the stdlib function with the same name and performs deprecated type conversion before comparison as follows:

• If a value converted to String is an optionally '-' prefixed, string of digits, one optional decimal point, followed by optional decimal digits - then the comparison is performed on the values converted to floating point.

• If a value is not considered convertible to float, it is converted to a String and the comparison is a lexical compare where min is the lexicographical earlier value.

• A lexicographical compare is performed in a system locale - international characters may therefore not appear in what a user thinks is the correct order.

• The conversion rules apply to values in pairs - the rule must hold for both values - a value may therefore be compared using different rules depending on the "other value".

• The returned result found to be the "lowest" is the original unconverted value.

The above rules have been deprecated in Puppet 6.0.0 as they produce strange results when given values of mixed data types. In general, either convert values to be all String or all Numeric values before calling the function, or call the function with a lambda that performs type conversion and comparison. This because one simply cannot compare Boolean with Regexp and with any arbitrary Array, Hash or Object and getting a meaningful result.

The one change in the function's behavior is when the function is given a single array argument. The stdlib implementation would return that array as the result where it now instead returns the max value from that array.

notice(min(1)) # would notice 1
notice(min(1,2)) # would notice 1
notice(min("1", 2)) # would notice 1
notice(min("0777", 512)) # would notice 512, since "0777" is not converted from octal form
notice(min(0777, 512)) # would notice 511, since 0777 is decimal 511
notice(min('aa', 'ab')) # would notice 'aa'
notice(min(['a'], ['b'])) # would notice ['a'], since "['a']" is before "['b']"

$x = [1,2,3,4]
notice(min(*$x)) # would notice 1

$x = [1,2,3,4]
notice(min($x)) # would notice 1
notice($x.min) # would notice 1

This example shows that a single array argument is used as the set of values as opposed to being a single returned value.

When calling with a lambda, it must accept two variables and it must return one of -1, 0, or 1 depending on if first argument is before/lower than, equal to, or higher/after the second argument.

notice(min("2", "10", "100") |$a, $b| { compare($a, $b) })

Would notice "10" as lower since it is lexicographically lower/before the other values. Without the lambda the stdlib compatible (deprecated) behavior would have been to return "2" since number conversion kicks in.

Signature 1

min(Numeric *$values)

Signature 2

min(String *$values)

Signature 3

min(Semver *$values)

Signature 4

min(Timespan *$values)

Signature 5

min(Timestamp *$values)

Signature 6

min(Array[Numeric] $values, Optional[Callable[2,2]] &$block)

Signature 7

min(Array[Semver] $values, Optional[Callable[2,2]] &$block)

Signature 8

min(Array[Timespan] $values, Optional[Callable[2,2]] &$block)

Signature 9

min(Array[Timestamp] $values, Optional[Callable[2,2]] &$block)

Signature 10

min(Array[String] $values, Optional[Callable[2,2]] &$block)

Signature 11

min(Array $values, Optional[Callable[2,2]] &$block)

Signature 12

min(Any *$values, Callable[2,2] &$block)

Signature 13

min(Any *$values)

Finds an existing module and returns the path to its root directory.

The argument to this function should be a module name String For example, the reference mysql will search for the directory <MODULES DIRECTORY>/mysql and return the first found on the modulepath.

This function can also accept:

• Multiple String arguments, which will return the path of the first module found, skipping non existing modules.

• An array of module names, which will return the path of the first module found from the given names in the array, skipping non existing modules.

The function returns undef if none of the given modules were found

Signature 1

module_directory(String *$names)

Signature 2

module_directory(Array[String] *$names)

Creates a new instance/object of a given data type.

This function makes it possible to create new instances of concrete data types. If a block is given it is called with the just created instance as an argument.

Calling this function is equivalent to directly calling the data type:

$a = Integer.new("42")
$b = Integer("42")

These would both convert the string "42" to the decimal value 42.

$a = Integer.new("42", 8)
$b = Integer({from => "42", radix => 8})

This would convert the octal (radix 8) number "42" in string form to the decimal value 34.

The new function supports two ways of giving the arguments:

• by name (using a hash with property to value mapping)

• by position (as regular arguments)

Note that it is not possible to create new instances of some abstract data types (for example Variant). The data type Optional[T] is an exception as it will create an instance of T or undef if the value to convert is undef.

The arguments that can be given is determined by the data type.

An assertion is always made that the produced value complies with the given type constraints.

Integer[0].new("-100")

Would fail with an assertion error (since value is less than 0).

The following sections show the arguments and conversion rules per data type built into the Puppet Type System.

Makes iteration continue with the next value, optionally with a given value for this iteration. If a value is not given it defaults to undef

$data = ['a','b','c']
$data.each |Integer $index, String $value| {
  if $index == 1 {
    next()
  }
  notice ("${index} = ${value}")
}

Would notice:

Notice: Scope(Class[main]): 0 = a
Notice: Scope(Class[main]): 2 = c

next(Optional[Any] $value)

Logs a message on the server at level notice.

notice(Any *$values)

Returns two arrays, the first containing the elements of enum for which the block evaluates to true, the second containing the rest.

Signature 1

partition(Collection $collection, Callable[1,1] &$block)

Make a virtual object real. This is useful when you want to know the name of the virtual object and don't want to bother with a full collection. It is slightly faster than a collection, and, of course, is a bit shorter. You must pass the object using a reference; e.g.: realize User[luke].

realize()

Applies a lambda to every value in a data structure from the first argument, carrying over the returned value of each iteration, and returns the result of the lambda's final iteration. This lets you create a new value or data structure by combining values from the first argument's data structure.

This function takes two mandatory arguments, in this order:

1. An array, hash, or other iterable object that the function will iterate over.

2. A lambda, which the function calls for each element in the first argument. It takes two mandatory parameters:

   1. A memo value that is overwritten after each iteration with the iteration's result.

   2. A second value that is overwritten after each iteration with the next value in the function's first argument.

$data.reduce |$memo, $value| { ... }

or

reduce($data) |$memo, $value| { ... }

You can also pass an optional "start memo" value as an argument, such as start below:

$data.reduce(start) |$memo, $value| { ... }

or

reduce($data, start) |$memo, $value| { ... }

When the first argument ($data in the above example) is an array, Puppet passes each of the data structure's values in turn to the lambda's parameters. When the first argument is a hash, Puppet converts each of the hash's values to an array in the form [key, value].

If you pass a start memo value, Puppet executes the lambda with the provided memo value and the data structure's first value. Otherwise, Puppet passes the structure's first two values to the lambda.

Puppet calls the lambda for each of the data structure's remaining values. For each call, it passes the result of the previous call as the first parameter ($memo in the above examples) and the next value from the data structure as the second parameter ($value).

# Reduce the array $data, returning the sum of all values in the array.
$data = [1, 2, 3]
$sum = $data.reduce |$memo, $value| { $memo + $value }
# $sum contains 6

# Reduce the array $data, returning the sum of a start memo value and all values in the
# array.
$data = [1, 2, 3]
$sum = $data.reduce(4) |$memo, $value| { $memo + $value }
# $sum contains 10

# Reduce the hash $data, returning the sum of all values and concatenated string of all
# keys.
$data = {a => 1, b => 2, c => 3}
$combine = $data.reduce |$memo, $value| {
  $string = "${memo[0]}${value[0]}"
  $number = $memo[1] + $value[1]
  [$string, $number]
}
# $combine contains [abc, 6]

# Reduce the array $data, returning the sum of all values in the array and starting
# with $memo set to an arbitrary value instead of $data's first value.
$data = [1, 2, 3]
$sum = $data.reduce(4) |$memo, $value| { $memo + $value }
# At the start of the lambda's first iteration, $memo contains 4 and $value contains 1.
# After all iterations, $sum contains 10.

# Reduce the hash $data, returning the sum of all values and concatenated string of
# all keys, and starting with $memo set to an arbitrary array instead of $data's first
# key-value pair.
$data = {a => 1, b => 2, c => 3}
$combine = $data.reduce( [d, 4] ) |$memo, $value| {
  $string = "${memo[0]}${value[0]}"
  $number = $memo[1] + $value[1]
  [$string, $number]
}
# At the start of the lambda's first iteration, $memo contains [d, 4] and $value
# contains [a, 1].
# $combine contains [dabc, 10]

# Reduce a hash of hashes $data, merging defaults into the inner hashes.
$data = {
  'connection1' => {
    'username' => 'user1',
    'password' => 'pass1',
  },
  'connection_name2' => {
    'username' => 'user2',
    'password' => 'pass2',
  },
}

$defaults = {
  'maxActive' => '20',
  'maxWait'   => '10000',
  'username'  => 'defaultuser',
  'password'  => 'defaultpass',
}

$merged = $data.reduce( {} ) |$memo, $x| {
  $memo + { $x[0] => $defaults + $data[$x[0]] }
}
# At the start of the lambda's first iteration, $memo is set to {}, and $x is set to
# the first [key, value] tuple. The key in $data is, therefore, given by $x[0]. In
# subsequent rounds, $memo retains the value returned by the expression, i.e.
# $memo + { $x[0] => $defaults + $data[$x[0]] }.

Signature 1

reduce(Iterable $enumerable, Callable[2,2] &$block)

Signature 2

reduce(Iterable $enumerable, Any $memo, Callable[2,2] &$block)

Performs regexp replacement on a string or array of strings.

Signature 1

regsubst(Variant[Array[String],String] $target, String $pattern, Variant[String,Hash[String,String]] $replacement, Optional[Optional[Pattern[/^[GEIM]*$/]]] $flags, Optional[Enum['N','E','S','U']] $encoding)

Requires the specified classes. Evaluate one or more classes, adding the required class as a dependency.

The relationship metaparameters work well for specifying relationships between individual resources, but they can be clumsy for specifying relationships between classes. This function is a superset of the include function, adding a class relationship so that the requiring class depends on the required class.

Warning: using require in place of include can lead to unwanted dependency cycles.

For instance, the following manifest, with require instead of include, would produce a nasty dependence cycle, because notify imposes a before between File[/foo] and Service[foo]:

class myservice {
  service { foo: ensure => running }
}

class otherstuff {
   include myservice
   file { '/foo': notify => Service[foo] }
}

Note that this function only works with clients 0.25 and later, and it will fail if used with earlier clients.

You must use the class's full name; relative names are not allowed. In addition to names in string form, you may also directly use Class and Resource Type values that are produced when evaluating resource and relationship expressions.

• Since 4.0.0 Class and Resource types, absolute names

• Since 4.7.0 Returns an Array[Type[Class]] with references to the required classes

require(Any *$names)

Makes iteration continue with the next value, optionally with a given value for this iteration. If a value is not given it defaults to undef

return(Optional[Any] $value)

Reverses the order of the elements of something that is iterable and optionally runs a lambda for each element.

This function takes one to two arguments:

1. An Iterable that the function will iterate over.

2. An optional lambda, which the function calls for each element in the first argument. It must request one parameter.

$data.reverse_each |$parameter| { <PUPPET CODE BLOCK> }

or

$reverse_data = $data.reverse_each

or

reverse_each($data) |$parameter| { <PUPPET CODE BLOCK> }

or

$reverse_data = reverse_each($data)

When no second argument is present, Puppet returns an Iterable that represents the reverse order of its first argument. This allows methods on Iterable to be chained.

When a lambda is given as the second argument, Puppet iterates the first argument in reverse order and passes each value in turn to the lambda, then returns undef.

# Puppet will log a notice for each of the three items
# in $data in reverse order.
$data = [1,2,3]
$data.reverse_each |$item| { notice($item) }

When no second argument is present, Puppet returns a new Iterable which allows it to be directly chained into another function that takes an Iterable as an argument.

# For the array $data, return an array containing each
# value multiplied by 10 in reverse order
$data = [1,2,3]
$transformed_data = $data.reverse_each.map |$item| { $item * 10 }
# $transformed_data is set to [30,20,10]

# For the array $data, return an array containing each
# value multiplied by 10 in reverse order
$data = [1,2,3]
$transformed_data = map(reverse_each($data)) |$item| { $item * 10 }
# $transformed_data is set to [30,20,10]

Signature 1

reverse_each(Iterable $iterable)

Signature 2

reverse_each(Iterable $iterable, Callable[1,1] &$block)

Returns an Integer value rounded to the nearest value. Takes a single Numeric value as an argument.

notice(round(2.9)) # would notice 3
notice(round(2.1)) # would notice 2
notice(round(-2.9)) # would notice -3

round(Numeric $val)

Strips trailing spaces from a String

This function is compatible with the stdlib function with the same name.

The function does the following:

• For a String the conversion removes all trailing ASCII white space characters such as space, tab, newline, and return. It does not remove other space-like characters like hard space (Unicode U+00A0). (Tip, /^[[:space:]]/ regular expression matches all space-like characters).

• For an Iterable[Variant[String, Numeric]] (for example an Array) each value is processed and the conversion is not recursive.

• If the value is Numeric it is simply returned (this is for backwards compatibility).

• An error is raised for all other data types.

" hello\n\t".rstrip()
rstrip(" hello\n\t")

Would both result in "hello"

[" hello\n\t", " hi\n\t"].rstrip()
rstrip([" hello\n\t", " hi\n\t"])

Would both result in ['hello', 'hi']

Signature 1

rstrip(Numeric $arg)

Signature 2

rstrip(String $arg)

Signature 3

rstrip(Iterable[Variant[String, Numeric]] $arg)

Scans a string and returns an array of one or more converted values based on the given format string. See the documentation of Ruby's String#scanf method for details about the supported formats (which are similar but not identical to the formats used in Puppet's sprintf function.)

This function takes two mandatory arguments: the first is the string to convert, and the second is the format string. The result of the scan is an array, with each successfully scanned and transformed value. The scanning stops if a scan is unsuccessful, and the scanned result up to that point is returned. If there was no successful scan, the result is an empty array.

"42".scanf("%i")

You can also optionally pass a lambda to scanf, to do additional validation or processing.

"42".scanf("%i") |$x| {
  unless $x[0] =~ Integer {
    fail "Expected a well formed integer value, got '$x[0]'"
  }
  $x[0]
}

scanf(String $data, String $format, Optional[Callable] &$block)

Returns a SHA1 hash value from a provided string.

sha1()

Returns a SHA256 hash value from a provided string.

sha256()

Quote and concatenate arguments for use in Bourne shell.

Each argument is quoted separately, and then all are concatenated with spaces. If an argument is an array, the elements of that array is interpolated within the rest of the arguments; this makes it possible to have an array of arguments and pass that array to shellquote instead of having to specify each argument individually in the call.

shellquote()

The same as length() - returns the size of an Array, Hash, String, or Binary value.

size(Variant[Collection, String, Binary] $arg)

Slices an array or hash into pieces of a given size.

This function takes two mandatory arguments: the first should be an array or hash, and the second specifies the number of elements to include in each slice.

When the first argument is a hash, each key value pair is counted as one. For example, a slice size of 2 will produce an array of two arrays with key, and value.

$a.slice(2) |$entry|          { notice "first ${$entry[0]}, second ${$entry[1]}" }
$a.slice(2) |$first, $second| { notice "first ${first}, second ${second}" }

The function produces a concatenated result of the slices.

slice([1,2,3,4,5,6], 2) # produces [[1,2], [3,4], [5,6]]
slice(Integer[1,6], 2)  # produces [[1,2], [3,4], [5,6]]
slice(4,2)              # produces [[0,1], [2,3]]
slice('hello',2)        # produces [[h, e], [l, l], [o]]

 $a.slice($n) |$x| { ... }
 slice($a) |$x| { ... }

The lambda should have either one parameter (receiving an array with the slice), or the same number of parameters as specified by the slice size (each parameter receiving its part of the slice). If there are fewer remaining elements than the slice size for the last slice, it will contain the remaining elements. If the lambda has multiple parameters, excess parameters are set to undef for an array, or to empty arrays for a hash.

    $a.slice(2) |$first, $second| { ... }

Signature 1

slice(Hash[Any, Any] $hash, Integer[1, default] $slice_size, Optional[Callable] &$block)

Signature 2

slice(Iterable $enumerable, Integer[1, default] $slice_size, Optional[Callable] &$block)

Sorts an Array numerically or lexicographically or the characters of a String lexicographically. Please note: This function is based on Ruby String comparison and as such may not be entirely UTF8 compatible. To ensure compatibility please use this function with Ruby 2.4.0 or greater - https://bugs.ruby-lang.org/issues/10085.

This function is compatible with the function sort() in stdlib.

• Comparison of characters in a string always uses a system locale and may not be what is expected for a particular locale

• Sorting is based on Ruby's <=> operator unless a lambda is given that performs the comparison.

  • comparison of strings is case dependent (use lambda with compare($a,$b) to ignore case)

  • comparison of mixed data types raises an error (if there is the need to sort mixed data types use a lambda)

Also see the compare() function for information about comparable data types in general.

notice(sort("xadb")) # notices 'abdx'

notice(sort([3,6,2])) # notices [2, 3, 6]

notice(sort([3,6,2]) |$a,$b| { compare($a, $b) }) # notices [2, 3, 6]
notice(sort([3,6,2]) |$a,$b| { compare($b, $a) }) # notices [6, 3, 2]

notice(sort(['A','b','C']))                                    # notices ['A', 'C', 'b']
notice(sort(['A','b','C']) |$a,$b| { compare($a, $b) })        # notices ['A', 'b', 'C']
notice(sort(['A','b','C']) |$a,$b| { compare($a, $b, true) })  # notices ['A', 'b', 'C']
notice(sort(['A','b','C']) |$a,$b| { compare($a, $b, false) }) # notices ['A','C', 'b']

notice(sort(['b', 3, 'a', 2]) |$a, $b| {
  case [$a, $b] {
    [String, Numeric] : { 1 }
    [Numeric, String] : { -1 }
    default:            { compare($a, $b) }
  }
})

Would notice [2,3,'a','b']

Signature 1

sort(String $string_value, Optional[Callable[2,2]] &$block)

Signature 2

sort(Array $array_value, Optional[Callable[2,2]] &$block)

Splits a string into an array using a given pattern. The pattern can be a string, regexp or regexp type.

$string     = 'v1.v2:v3.v4'
$array_var1 = split($string, /:/)
$array_var2 = split($string, '[.]')
$array_var3 = split($string, Regexp['[.:]'])

#`$array_var1` now holds the result `['v1.v2', 'v3.v4']`,
# while `$array_var2` holds `['v1', 'v2:v3', 'v4']`, and
# `$array_var3` holds `['v1', 'v2', 'v3', 'v4']`.

Note that in the second example, we split on a literal string that contains a regexp meta-character (.), which must be escaped. A simple way to do that for a single character is to enclose it in square brackets; a backslash will also escape a single character.

Signature 1

split(String $str, String $pattern)

Signature 2

split(String $str, Regexp $pattern)

Signature 3

split(String $str, Type[Regexp] $pattern)

Signature 4

split(Sensitive[String] $sensitive, String $pattern)

Signature 5

split(Sensitive[String] $sensitive, Regexp $pattern)

Signature 6

split(Sensitive[String] $sensitive, Type[Regexp] $pattern)

Perform printf-style formatting of text.

The first parameter is format string describing how the rest of the parameters should be formatted. See the documentation for the Kernel::sprintf function in Ruby for details.

To use named format arguments, provide a hash containing the target string values as the argument to be formatted. For example:

notice sprintf(\"%<x>s : %<y>d\", { 'x' => 'value is', 'y' => 42 })

This statement produces a notice of value is : 42.

sprintf()

When no block is given, Puppet returns a new Iterable which allows it to be directly chained into another function that takes an Iterable as an argument.

# For the array $data, return an array, set to the first element and each 5th successor element, in reverse
# order multiplied by 10
$data = Integer[0,20]
$transformed_data = $data.step(5).map |$item| { $item * 10 }
$transformed_data contains [0,50,100,150,200]

# For the array $data, return an array, set to the first and each 5th
# successor, in reverse order, multiplied by 10
$data = Integer[0,20]
$transformed_data = map(step($data, 5)) |$item| { $item * 10 }
$transformed_data contains [0,50,100,150,200]

Signature 1

step(Iterable $iterable, Integer[1] $step)

Signature 2

step(Iterable $iterable, Integer[1] $step, Callable[1,1] &$block)

Formats timestamp or timespan according to the directives in the given format string. The directives begins with a percent (%) character. Any text not listed as a directive will be passed through to the output string.

A third optional timezone argument can be provided. The first argument will then be formatted to represent a local time in that timezone. The timezone can be any timezone that is recognized when using the '%z' or '%Z' formats, or the word 'current', in which case the current timezone of the evaluating process will be used. The timezone argument is case insensitive.

The default timezone, when no argument is provided, or when using the keyword default, is 'UTC'.

The directive consists of a percent (%) character, zero or more flags, optional minimum field width and a conversion specifier as follows:

%[Flags][Width]Conversion

Strips leading and trailing spaces from a String

This function is compatible with the stdlib function with the same name.

The function does the following:

• For a String the conversion removes all leading and trailing ASCII white space characters such as space, tab, newline, and return. It does not remove other space-like characters like hard space (Unicode U+00A0). (Tip, /^[[:space:]]/ regular expression matches all space-like characters).

• For an Iterable[Variant[String, Numeric]] (for example an Array) each value is processed and the conversion is not recursive.

• If the value is Numeric it is simply returned (this is for backwards compatibility).

• An error is raised for all other data types.

" hello\n\t".strip()
strip(" hello\n\t")

Would both result in "hello"

[" hello\n\t", " hi\n\t"].strip()
strip([" hello\n\t", " hi\n\t"])

Would both result in ['hello', 'hi']

Signature 1

strip(Numeric $arg)

Signature 2

strip(String $arg)

Signature 3

strip(Iterable[Variant[String, Numeric]] $arg)

Add the specified tags to the containing class or definition. All contained objects will then acquire that tag, also.

tag()

A boolean function that tells you whether the current container is tagged with the specified tags. The tags are ANDed, so that all of the specified tags must be included for the function to return true.

tagged()

Loads an ERB template from a module, evaluates it, and returns the resulting value as a string.

The argument to this function should be a <MODULE NAME>/<TEMPLATE FILE> reference, which will load <TEMPLATE FILE> from a module's templates directory. (For example, the reference apache/vhost.conf.erb will load the file <MODULES DIRECTORY>/apache/templates/vhost.conf.erb.)

This function can also accept:

• An absolute path, which can load a template file from anywhere on disk.

• Multiple arguments, which will evaluate all of the specified templates and return their outputs concatenated into a single string.

template()

Calls a lambda with the given argument unless the argument is undef. Returns undef if the argument is undef, and otherwise the result of giving the argument to the lambda.

This is useful to process a sequence of operations where an intermediate result may be undef (which makes the entire sequence undef). The then function is especially useful with the function dig which performs in a similar way "digging out" a value in a complex structure.

$data = {a => { b => [{x => 10, y => 20}, {x => 100, y => 200}]}}
notice $data.dig(a, b, 1, x).then |$x| { $x * 2 }

Would notice the value 200

Contrast this with:

$data = {a => { b => [{x => 10, y => 20}, {not_x => 100, why => 200}]}}
notice $data.dig(a, b, 1, x).then |$x| { $x * 2 }

Which would notice undef since the last lookup of 'x' results in undef which is returned (without calling the lambda given to the then function).

As a result there is no need for conditional logic or a temporary (non local) variable as the result is now either the wanted value (x) multiplied by 2 or undef.

Calls to then can be chained. In the next example, a structure is using an offset based on using 1 as the index to the first element (instead of 0 which is used in the language). We are not sure if user input actually contains an index at all, or if it is outside the range of available names.args.

# Names to choose from
$names = ['Ringo', 'Paul', 'George', 'John']

# Structure where 'beatle 2' is wanted (but where the number refers
# to 'Paul' because input comes from a source using 1 for the first
# element).

$data = ['singer', { beatle => 2 }]
$picked = assert_type(String,
  # the data we are interested in is the second in the array,
  # a hash, where we want the value of the key 'beatle'
  $data.dig(1, 'beatle')
    # and we want the index in $names before the given index
    .then |$x| { $names[$x-1] }
    # so we can construct a string with that beatle's name
    .then |$x| { "Picked Beatle '${x}'" }
)
notice $picked

Would notice "Picked Beatle 'Paul'", and would raise an error if the result was not a String.

• Since 4.5.0

then(Any $arg, Callable[1,1] &$block)

Runs a lambda recursively and repeatedly using values from a data structure, then returns the unchanged data structure, or if a lambda is not given, returns an Iterator for the tree.

This function takes one mandatory argument, one optional, and an optional block in this order:

1. An Array, Hash, Iterator, or Object that the function will iterate over.

2. An optional hash with the options:

   • include_containers => Optional[Boolean] # default true - if containers should be given to the lambda

   • include_values => Optional[Boolean] # default true - if non containers should be given to the lambda

   • include_root => Optional[Boolean] # default true - if the root container should be given to the lambda

   • container_type => Optional[Type[Variant[Array, Hash, Object]]] # a type that determines what a container is - can only be set to a type that matches the default Variant[Array, Hash, Object].

   • order => Enum[depth_first, breadth_first] # default ´depth_first`, the order in which elements are visited

   • include_refs => Optional[Boolean] # default false, if attributes in objects marked as bing of reference kind should be included.

3. An optional lambda, which the function calls for each element in the first argument. It must accept one or two arguments; either $path, and $value, or just $value.

$data.tree_each |$path, $value| { <PUPPET CODE BLOCK> } $data.tree_each |$value| { <PUPPET CODE BLOCK> }

or

tree_each($data) |$path, $value| { <PUPPET CODE BLOCK> } tree_each($data) |$value| { <PUPPET CODE BLOCK> }

The parameter $path is always given as an Array containing the path that when applied to the tree as $data.dig(*$path) yields the $value. The $value` is the value at that path.

For Array values, the path will contain Integer entries with the array index, and for Hash values, the path will contain the hash key, which may be Any value. For Object containers, the entry is the name of the attribute (a String).

The tree is walked in either depth-first order, or in breadth-first order under the control of the order option, yielding each Array, Hash, Object, and each entry/attribute. The default is depth_first which means that children are processed before siblings. An order of breadth_first means that siblings are processed before children.

[1, [2, 3], 4]

If containers are skipped, results in:

• depth_first order 1, 2, 3, 4

• breadth_first order 1, 4,2, 3

If containers and root are included, results in:

• depth_first order [1, [2, 3], 4], 1, [2, 3], 2, 3, 4

• breadth_first order [1, [2, 3], 4], 1, [2, 3], 4, 2, 3

Typical use of the tree_each function include:

• a more efficient way to iterate over a tree than first using flatten on an array as that requires a new (potentially very large) array to be created

• when a tree needs to be transformed and 'pretty printed' in a template

• avoiding having to write a special recursive function when tree contains hashes (flatten does not work on hashes)

$data = [1, 2, [3, [4, 5]]]
$data.tree_each({include_containers => false}) |$v| { notice "$v" }

This would call the lambda 5 times with with the following values in sequence: 1, 2, 3, 4, 5

$data = [1, 2, [3, [4, 5]]]
$data.tree_each |$v| { notice "$v" }

This would call the lambda 7 times with the following values in sequence: 1, 2, [3, [4, 5]], 3, [4, 5], 4, 5

$data = [1, 2, [3, [4, 5]]]
$data.tree_each({include_values => false, include_root => false}) |$v| { notice "$v" }

This would call the lambda 2 times with the following values in sequence: [3, [4, 5]], [4, 5]

Any Puppet Type system data type can be used to filter what is considered to be a container, but it must be a narrower type than one of the default Array, Hash, Object types - for example it is not possible to make a String be a container type.

$data = [1, {a => 'hello', b => [100, 200]}, [3, [4, 5]]]
$data.tree_each({container_type => Array, include_containers => false} |$v| { notice "$v" }

Would call the lambda 5 times with 1, {a => 'hello', b => [100, 200]}, 3, 4, 5

Chaining When calling tree_each without a lambda the function produces an Iterator that can be chained into another iteration. Thus it is easy to use one of:

• reverse_each - get "leaves before root"

• filter - prune the tree

• map - transform each element

Note than when chaining, the value passed on is a Tuple with [path, value].

# A tree of some complexity (here very simple for readability)
$tree = [
 { name => 'user1', status => 'inactive', id => '10'},
 { name => 'user2', status => 'active', id => '20'}
]
notice $tree.tree_each.filter |$v| {
 $value = $v[1]
 $value =~ Hash and $value[status] == active
}

Would notice [[[1], {name => user2, status => active, id => 20}]], which can then be processed further as each filtered result appears as a Tuple with [path, value].

For general examples that demonstrates iteration see the Puppet iteration documentation.

Signature 1

tree_each(Variant[Iterator, Array, Hash, Object] $tree, Optional[OptionsType] $options, Callable[2,2] &$block)

Signature 2

tree_each(Variant[Iterator, Array, Hash, Object] $tree, Optional[OptionsType] $options, Callable[1,1] &$block)

Signature 3

tree_each(Variant[Iterator, Array, Hash, Object] $tree, Optional[OptionsType] $options)

Returns the data type of a given value with a given degree of generality.

type InferenceFidelity = Enum[generalized, reduced, detailed]

function type(Any $value, InferenceFidelity $fidelity = 'detailed') # returns Type

notice type(42) =~ Type[Integer]

Would notice true.

By default, the best possible inference is made where all details are retained. This is good when the type is used for further type calculations but is overwhelmingly rich in information if it is used in a error message.

The optional argument $fidelity may be given as (from lowest to highest fidelity):

• generalized - reduces to common type and drops size constraints

• reduced - reduces to common type in collections

• detailed - (default) all details about inferred types is retained

notice type([3.14, 42], 'generalized')
notice type([3.14, 42], 'reduced'')
notice type([3.14, 42], 'detailed')
notice type([3.14, 42])

Would notice the four values:

1. Array[Numeric]

2. Array[Numeric, 2, 2]

3. Tuple[Float[3.14], Integer[42,42]]]

4. Tuple[Float[3.14], Integer[42,42]]]

Signature 1

type(Any $value, Optional[Enum[detailed]] $inference_method)

Signature 2

type(Any $value, Enum[reduced] $inference_method)

Signature 3

type(Any $value, Enum[generalized] $inference_method)

Produces a unique set of values from an Iterable argument.

• If the argument is a String, the unique set of characters are returned as a new String.

• If the argument is a Hash, the resulting hash associates a set of keys with a set of unique values.

• For all other types of Iterable (Array, Iterator) the result is an Array with a unique set of entries.

• Comparison of all String values are case sensitive.

• An optional code block can be given - if present it is given each candidate value and its return is used instead of the given value. This enables transformation of the value before comparison. The result of the lambda is only used for comparison.

• The optional code block when used with a hash is given each value (not the keys).

# will produce 'abc'
"abcaabb".unique

# will produce ['a', 'b', 'c']
['a', 'b', 'c', 'a', 'a', 'b'].unique

# will produce { ['a', 'b'] => [10], ['c'] => [20]}
{'a' => 10, 'b' => 10, 'c' => 20}.unique

# will produce { 'a' => 10, 'c' => 20 } (use first key with first value)
Hash.new({'a' => 10, 'b' => 10, 'c' => 20}.unique.map |$k, $v| { [ $k[0] , $v[0]] })

# will produce { 'b' => 10, 'c' => 20 } (use last key with first value)
Hash.new({'a' => 10, 'b' => 10, 'c' => 20}.unique.map |$k, $v| { [ $k[-1] , $v[0]] })

# will produce [3, 2, 1]
[1,2,2,3,3].reverse_each.unique

# will produce [['sam', 'smith'], ['sue', 'smith']]
[['sam', 'smith'], ['sam', 'brown'], ['sue', 'smith']].unique |$x| { $x[0] }

# will produce [['sam', 'smith'], ['sam', 'brown']]
[['sam', 'smith'], ['sam', 'brown'], ['sue', 'smith']].unique |$x| { $x[1] }

# will produce ['aBc', 'bbb'] (using a lambda to make comparison using downcased (%d) strings)
['aBc', 'AbC', 'bbb'].unique |$x| { String($x,'%d') }

# will produce {[a] => [10], [b, c, d, e] => [11, 12, 100]}
{a => 10, b => 11, c => 12, d => 100, e => 11}.unique |$v| { if $v > 10 { big } else { $v } }

Note that for Hash the result is slightly different than for the other data types. For those the result contains the first-found unique value, but for Hash it contains associations from a set of keys to the set of values clustered by the equality lambda (or the default value equality if no lambda was given). This makes the unique function more versatile for hashes in general, while requiring that the simple computation of "hash's unique set of values" is performed as $hsh.map |$k, $v| { $v }.unique. (Generally, it's meaningless to compute the unique set of hash keys because they are unique by definition. However, the situation can change if the hash keys are processed with a different lambda for equality. For this unique computation, first map the hash to an array of its keys.) If the more advanced clustering is wanted for one of the other data types, simply transform it into a Hash as shown in the following example.

# Array ['a', 'b', 'c'] to Hash with index results in
# {0 => 'a', 1 => 'b', 2 => 'c'}
Hash(['a', 'b', 'c'].map |$i, $v| { [$i, $v]})

# String "abc" to Hash with index results in
# {0 => 'a', 1 => 'b', 2 => 'c'}
Hash(Array("abc").map |$i,$v| { [$i, $v]})
"abc".to(Array).map |$i,$v| { [$i, $v]}.to(Hash)

Signature 1

unique(String $string, Optional[Callable[String]] &$block)

Signature 2

unique(Hash $hash, Optional[Callable[Any]] &$block)

Signature 3

unique(Array $array, Optional[Callable[Any]] &$block)

Signature 4

unique(Iterable $iterable, Optional[Callable[Any]] &$block)

Unwraps a Sensitive value and returns the wrapped object. Returns the Value itself, if it is not Sensitive.

$plaintext = 'hunter2'
$pw = Sensitive.new($plaintext)
notice("Wrapped object is $pw") #=> Prints "Wrapped object is Sensitive [value redacted]"
$unwrapped = $pw.unwrap
notice("Unwrapped object is $unwrapped") #=> Prints "Unwrapped object is hunter2"

You can optionally pass a block to unwrap in order to limit the scope where the unwrapped value is visible.

$pw = Sensitive.new('hunter2')
notice("Wrapped object is $pw") #=> Prints "Wrapped object is Sensitive [value redacted]"
$pw.unwrap |$unwrapped| {
  $conf = inline_template("password: ${unwrapped}\n")
  Sensitive.new($conf)
} #=> Returns a new Sensitive object containing an interpolated config file
# $unwrapped is now out of scope

Signature 1

unwrap(Sensitive $arg, Optional[Callable] &$block)

Signature 2

unwrap(Any $arg, Optional[Callable] &$block)

Converts a String, Array or Hash (recursively) into upper case.

This function is compatible with the stdlib function with the same name.

The function does the following:

• For a String, its upper case version is returned. This is done using Ruby system locale which handles some, but not all special international up-casing rules (for example German double-s ß is upcased to "SS", whereas upper case double-s is downcased to ß).

• For Array and Hash the conversion to upper case is recursive and each key and value must be convertible by this function.

• When a Hash is converted, some keys could result in the same key - in those cases, the latest key-value wins. For example if keys "aBC", and "abC" where both present, after upcase there would only be one key "ABC".

• If the value is Numeric it is simply returned (this is for backwards compatibility).

• An error is raised for all other data types.

Please note: This function relies directly on Ruby's String implementation and as such may not be entirely UTF8 compatible. To ensure best compatibility please use this function with Ruby 2.4.0 or greater - https://bugs.ruby-lang.org/issues/10085.

'hello'.upcase()
upcase('hello')

Would both result in "HELLO"

['a', 'b'].upcase()
upcase(['a', 'b'])

Would both result in ['A', 'B']

{'a' => 'hello', 'b' => 'goodbye'}.upcase()

Would result in {'A' => 'HELLO', 'B' => 'GOODBYE'}

['a', 'b', ['c', ['d']], {'x' => 'y'}].upcase

Would result in ['A', 'B', ['C', ['D']], {'X' => 'Y'}]

Signature 1

upcase(Numeric $arg)

Signature 2

upcase(String $arg)

Signature 3

upcase(Array[StringData] $arg)

Signature 4

upcase(Hash[StringData, StringData] $arg)

Returns the values of a hash as an Array

$hsh = {"apples" => 3, "oranges" => 4 }
$hsh.values()
values($hsh)
# both results in the array [3, 4]

• Note that a hash in the puppet language accepts any data value (including undef) unless it is constrained with a Hash data type that narrows the allowed data types.

• For an empty hash, an empty array is returned.

• The order of the values is the same as the order in the hash (typically the order in which they were added).

values(Hash $hsh)

Compares two version numbers.

Prototype:

$result = versioncmp(a, b)

Where a and b are arbitrary version strings.

Optional parameter ignore_trailing_zeroes is used to ignore unnecessary trailing version numbers like .0 or .0.00

This function returns:

• 1 if version a is greater than version b

• 0 if the versions are equal

• -1 if version a is less than version b

This function uses the same version comparison algorithm used by Puppet's package type.

versioncmp(String $a, String $b, Optional[Boolean] $ignore_trailing_zeroes)

Logs a message on the server at level warning.

warning(Any *$values)

Calls a lambda with the given arguments and returns the result.

Since a lambda's scope is local to the lambda, you can use the with function to create private blocks of code within a class using variables whose values cannot be accessed outside of the lambda.

# Concatenate three strings into a single string formatted as a list.
$fruit = with("apples", "oranges", "bananas") |$x, $y, $z| {
  "${x}, ${y}, and ${z}"
}
$check_var = $x
# $fruit contains "apples, oranges, and bananas"
# $check_var is undefined, as the value of $x is local to the lambda.

with(Any *$arg, Callable &$block)

The yaml_data is a hiera 5 data_hash data provider function. See the configuration guide documentation for how to use this function.

yaml_data(Struct[{path=>String[1]}] $options, Puppet::LookupContext $context)