Resource Type: service

NOTE: This page was generated from the Puppet source code on 2018-08-28 06:48:02 -0700 service —–

Description

Manage running services. Service support unfortunately varies widely by platform — some platforms have very little if any concept of a running service, and some have a very codified and powerful concept. Puppet’s service support is usually capable of doing the right thing, but the more information you can provide, the better behaviour you will get.

Puppet 2.7 and newer expect init scripts to have a working status command. If this isn’t the case for any of your services’ init scripts, you will need to set hasstatus to false and possibly specify a custom status command in the status attribute. As a last resort, Puppet will attempt to search the process table by calling whatever command is listed in the ps fact. The default search pattern is the name of the service, but you can specify it with the pattern attribute.

Refresh: service resources can respond to refresh events (via notify, subscribe, or the ~> arrow). If a service receives an event from another resource, Puppet will restart the service it manages. The actual command used to restart the service depends on the platform and can be configured:

  • If you set hasrestart to true, Puppet will use the init script’s restart command.
  • You can provide an explicit command for restarting with the restart attribute.
  • If you do neither, the service’s stop and start commands will be used.

Attributes

service { 'resource title':
  name       => # (namevar) The name of the service to run.  This name is...
  ensure     => # Whether a service should be running.  Valid...
  binary     => # The path to the daemon.  This is only used for...
  control    => # The control variable used to manage services...
  enable     => # Whether a service should be enabled to start at...
  flags      => # Specify a string of flags to pass to the startup 
  hasrestart => # Specify that an init script has a `restart...
  hasstatus  => # Declare whether the service's init script has a...
  manifest   => # Specify a command to config a service, or a path 
  path       => # The search path for finding init scripts....
  pattern    => # The pattern to search for in the process table...
  provider   => # The specific backend to use for this `service...
  restart    => # Specify a *restart* command manually.  If left...
  start      => # Specify a *start* command manually.  Most...
  status     => # Specify a *status* command manually.  This...
  stop       => # Specify a *stop* command...
  # ...plus any applicable metaparameters.
}

name

(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)

The name of the service to run.

This name is used to find the service; on platforms where services have short system names and long display names, this should be the short name. (To take an example from Windows, you would use “wuauserv” rather than “Automatic Updates.”)

(↑ Back to service attributes)

ensure

(Property: This attribute represents concrete state on the target system.)

Whether a service should be running.

Allowed values:

  • stopped or false
  • running or true

(↑ Back to service attributes)

binary

The path to the daemon. This is only used for systems that do not support init scripts. This binary will be used to start the service if no start parameter is provided.

(↑ Back to service attributes)

control

The control variable used to manage services (originally for HP-UX). Defaults to the upcased service name plus START replacing dots with underscores, for those providers that support the controllable feature.

(↑ Back to service attributes)

enable

(Property: This attribute represents concrete state on the target system.)

Whether a service should be enabled to start at boot. This property behaves quite differently depending on the platform; wherever possible, it relies on local tools to enable or disable a given service.

If you don’t specify a value for the enable attribute, Puppet leaves that aspect of the service alone and your operating system determines the behavior.

Allowed values:

  • true
  • false
  • manual
  • mask

Requires features enableable.

(↑ Back to service attributes)

flags

(Property: This attribute represents concrete state on the target system.)

Specify a string of flags to pass to the startup script.

Requires features flaggable.

(↑ Back to service attributes)

hasrestart

Specify that an init script has a restart command. If this is false and you do not specify a command in the restart attribute, the init script’s stop and start commands will be used.

Defaults to false.

Allowed values:

  • true
  • false

(↑ Back to service attributes)

hasstatus

Declare whether the service’s init script has a functional status command; defaults to true. This attribute’s default value changed in Puppet 2.7.0.

The init script’s status command must return 0 if the service is running and a nonzero value otherwise. Ideally, these exit codes should conform to the LSB’s specification for init script status actions, but Puppet only considers the difference between 0 and nonzero to be relevant.

If a service’s init script does not support any kind of status command, you should set hasstatus to false and either provide a specific command using the status attribute or expect that Puppet will look for the service name in the process table. Be aware that ‘virtual’ init scripts (like ‘network’ under Red Hat systems) will respond poorly to refresh events from other resources if you override the default behavior without providing a status command.

Default: true

Allowed values:

  • true
  • false

(↑ Back to service attributes)

manifest

Specify a command to config a service, or a path to a manifest to do so.

(↑ Back to service attributes)

path

The search path for finding init scripts. Multiple values should be separated by colons or provided as an array.

(↑ Back to service attributes)

pattern

The pattern to search for in the process table. This is used for stopping services on platforms that do not support init scripts, and is also used for determining service status on those service whose init scripts do not include a status command.

Defaults to the name of the service. The pattern can be a simple string or any legal Ruby pattern, including regular expressions (which should be quoted without enclosing slashes).

(↑ Back to service attributes)

provider

The specific backend to use for this service resource. You will seldom need to specify this — Puppet will usually discover the appropriate provider for your platform.

Available providers are:

(↑ Back to service attributes)

restart

Specify a restart command manually. If left unspecified, the service will be stopped and then started.

(↑ Back to service attributes)

start

Specify a start command manually. Most service subsystems support a start command, so this will not need to be specified.

(↑ Back to service attributes)

status

Specify a status command manually. This command must return 0 if the service is running and a nonzero value otherwise. Ideally, these exit codes should conform to the LSB’s specification for init script status actions, but Puppet only considers the difference between 0 and nonzero to be relevant.

If left unspecified, the status of the service will be determined automatically, usually by looking for the service in the process table.

(↑ Back to service attributes)

stop

Specify a stop command manually.

(↑ Back to service attributes)

Providers

base

The simplest form of Unix service support.

You have to specify enough about your service for this to work; the minimum you can specify is a binary for starting the process, and this same binary will be searched for in the process table to stop the service. As with init-style services, it is preferable to specify start, stop, and status commands.

  • Required binaries: kill
  • Supported features: refreshable

bsd

Generic BSD form of init-style service management with rc.d.

Uses rc.conf.d for service enabling and disabling.

  • Confined to: operatingsystem == [:freebsd, :dragonfly]
  • Supported features: enableable, refreshable.

daemontools

Daemontools service management.

This provider manages daemons supervised by D.J. Bernstein daemontools. When detecting the service directory it will check, in order of preference:

  • /service
  • /etc/service
  • /var/lib/svscan

The daemon directory should be in one of the following locations:

  • /var/lib/service
  • /etc

…or this can be overridden in the resource’s attributes:

service { 'myservice':
  provider => 'daemontools',
  path     => '/path/to/daemons',
}

This provider supports out of the box:

  • start/stop (mapped to enable/disable)
  • enable/disable
  • restart
  • status

If a service has ensure => "running", it will link /path/to/daemon to /path/to/service, which will automatically enable the service.

If a service has ensure => "stopped", it will only shut down the service, not remove the /path/to/service link.

  • Required binaries: /usr/bin/svc, /usr/bin/svstat
  • Supported features: enableable, refreshable

debian

Debian’s form of init-style management.

The only differences from init are support for enabling and disabling services via update-rc.d and the ability to determine enabled status via invoke-rc.d.

  • Required binaries: /usr/sbin/update-rc.d, /usr/sbin/invoke-rc.d, /usr/sbin/service
  • Default for: ["operatingsystem", "cumuluslinux"] == ["operatingsystemmajrelease", "['1','2']"], ["operatingsystem", "debian"] == ["operatingsystemmajrelease", "['5','6','7']"]
  • Supported features: enableable, refreshable.

freebsd

Provider for FreeBSD and DragonFly BSD. Uses the rcvar argument of init scripts and parses/edits rc files.

  • Confined to: operatingsystem == [:freebsd, :dragonfly]
  • Default for operatingsystem == freebsd, dragonfly.
  • Supported features: enableable, refreshable.

gentoo

Gentoo’s form of init-style service management.

Uses rc-update for service enabling and disabling.

  • Required binaries: /sbin/rc-update
  • Confined to: operatingsystem == gentoo
  • Supported features: enableable, refreshable

init

Standard init-style service management.

  • Confined to:

    true == begin
        os = Facter.value(:operatingsystem).downcase
        family = Facter.value(:osfamily).downcase
        !(os == 'debian' || os == 'ubuntu' || family == 'redhat')
    end
    
  • Supported features: refreshable

launchd

This provider manages jobs with launchd, which is the default service framework for Mac OS X (and may be available for use on other platforms).

For more information, see the launchd man page:

This provider reads plists out of the following directories:

  • /System/Library/LaunchDaemons
  • /System/Library/LaunchAgents
  • /Library/LaunchDaemons
  • /Library/LaunchAgents

…and builds up a list of services based upon each plist’s “Label” entry.

This provider supports:

  • ensure => running/stopped,
  • enable => true/false
  • status
  • restart

Here is how the Puppet states correspond to launchd states:

  • stopped — job unloaded
  • started — job loaded
  • enabled — ‘Disable’ removed from job plist file
  • disabled — ‘Disable’ added to job plist file

Note that this allows you to do something launchctl can’t do, which is to be in a state of “stopped/enabled” or “running/disabled”.

Note that this provider does not support overriding ‘restart’

  • Required binaries: /bin/launchctl
  • Confined to: operatingsystem == darwin, feature == cfpropertylist
  • Default for operatingsystem == darwin
  • Supported features: enableable, refreshable

openbsd

Provider for OpenBSD’s rc.d daemon control scripts

  • Required binaries: /usr/sbin/rcctl
  • Confined to: operatingsystem == openbsd
  • Default for operatingsystem == openbsd
  • Supported features: enableable, flaggable, refreshable

openrc

Support for Gentoo’s OpenRC initskripts

Uses rc-update, rc-status and rc-service to manage services.

  • Required binaries: /sbin/rc-service, /sbin/rc-update
  • Default for operatingsystem == gentoo, operatingsystem == funtoo.
  • Supported features: enableable, refreshable

openwrt

Support for OpenWrt flavored init scripts.

Uses /etc/init.d/service_name enable, disable, and enabled.

  • Confined to: operatingsystem == openwrt
  • Default for operatingsystem == openwrt
  • Supported features: enableable, refreshable

rcng

RCng service management with rc.d

  • Confined to: operatingsystem == [:netbsd, :cargos]
  • Default for operatingsystem == netbsd, cargos
  • Supported features: enableable, refreshable

redhat

Red Hat’s (and probably many others’) form of init-style service management. Uses chkconfig for service enabling and disabling.

  • Required binaries: /sbin/chkconfig, /sbin/service
  • Default for osfamily == redhat, operatingsystemmajrelease == 10, 11 and osfamily == suse
  • Supported features: enableable, refreshable

runit

Runit service management.

This provider manages daemons running supervised by Runit. When detecting the service directory it will check, in order of preference:

  • /service
  • /etc/service
  • /var/service

The daemon directory should be in one of the following locations:

  • /etc/sv
  • /var/lib/service

or this can be overridden in the service resource parameters:

service { 'myservice':
  provider => 'runit',
  path     => '/path/to/daemons',
}

This provider supports out of the box:

  • start/stop
  • enable/disable
  • restart
  • status

  • Required binaries: /usr/bin/sv
  • Supported features: enableable, refreshable

service

The simplest form of service support.

  • Supported features: refreshable

smf

Support for Sun’s new Service Management Framework.

Starting a service is effectively equivalent to enabling it, so there is only support for starting and stopping services, which also enables and disables them, respectively.

By specifying manifest => "/path/to/service.xml", the SMF manifest will be imported if it does not exist.

  • Required binaries: /usr/sbin/svcadm, /usr/bin/svcs, /usr/sbin/svccfg
  • Confined to: osfamily == solaris
  • Default for osfamily == solaris
  • Supported features: enableable, refreshable

src

Support for AIX’s System Resource controller.

Services are started/stopped based on the stopsrc and startsrc commands, and some services can be refreshed with refresh command.

Enabling and disabling services is not supported, as it requires modifications to /etc/inittab. Starting and stopping groups of subsystems is not yet supported.

  • Required binaries: /usr/bin/lssrc, /usr/bin/refresh, /usr/bin/startsrc, /usr/bin/stopsrc, /usr/sbin/chitab, /usr/sbin/lsitab, /usr/sbin/mkitab, /usr/sbin/rmitab
  • Confined to: operatingsystem == aix
  • Default for operatingsystem == aix
  • Supported features: enableable, refreshable

systemd

Manages systemd services using systemctl.

Because systemd defaults to assuming the .service unit type, the suffix may be omitted. Other unit types (such as .path) may be managed by providing the proper suffix.

  • Required binaries: systemctl
  • Default for
    • osfamily == archlinux
    • operatingsystemmajrelease == 7 and osfamily == redhat
    • operatingsystem == fedora and osfamily == redhat
    • osfamily == suse
    • osfamily == coreos
    • operatingsystem == amazon and operatingsystemmajrelease == 2
    • operatingsystem == debian and operatingsystemmajrelease == 8, stretch/sid, 9, buster/sid
    • operatingsystem == ubuntu and operatingsystemmajrelease == 15.04, 15.10, 16.04, 16.10, 17.04, 17.10, 18.04
    • operatingsystem == cumuluslinux and operatingsystemmajrelease == 3.
  • Supported features: enableable, maskable, refreshable

upstart

Ubuntu service management with upstart.

This provider manages upstart jobs on Ubuntu. For upstart documentation, see http://upstart.ubuntu.com/.

  • Required binaries: /sbin/start, /sbin/stop, /sbin/restart, /sbin/status, /sbin/initctl
  • Confined to:
    any == [
      Facter.value(:operatingsystem) == 'Ubuntu',
      (Facter.value(:osfamily) == 'RedHat' and Facter.value(:operatingsystemrelease) =~ /^6\./),
      (Facter.value(:operatingsystem) == 'Amazon' and Facter.value(:operatingsystemmajrelease) =~ /\d{4}/),
      Facter.value(:operatingsystem) == 'LinuxMint',
    ]
    
    exists == /var/run/upstart-socket-bridge.pid
    
  • Default for operatingsystem == ubuntu and operatingsystemmajrelease == 10.04, 12.04, 14.04, 14.10
  • Supported features: enableable, refreshable

windows

Support for Windows Service Control Manager (SCM). This provider can start, stop, enable, and disable services, and the SCM provides working status methods for all services.

Control of service groups (dependencies) is not yet supported, nor is running services as a specific user.

  • Required binaries: net.exe
  • Confined to: operatingsystem == windows
  • Default for operatingsystem == windows
  • Supported features: enableable, refreshable

Provider Features

Available features:

  • controllable — The provider uses a control variable.
  • enableable — The provider can enable and disable the service
  • flaggable — The provider can pass flags to the service.
  • maskable — The provider can ‘mask’ the service.
  • refreshable — The provider can restart the service.

Provider support:

Provider controllable enableable flaggable maskable refreshable
base X
bsd X X
daemontools X X
debian X X
freebsd X X
gentoo X X
init X
launchd X X
openbsd X X X
openrc X X
openwrt X X
rcng X X
redhat X X
runit X X
service X
smf X X
src X X
systemd X X X
upstart X X
windows X X

NOTE: This page was generated from the Puppet source code on 2018-08-28 06:48:02 -0700