NOTE: This page was generated from the Puppet source code on 2018-02-05 13:46:06 -0800
This is the documentation for the built-in resource types and providers, keyed to a specific Puppet version. (See sidebar.) Additional resource types can be distributed in Puppet modules; you can find and install modules by browsing the Puppet Forge. See each module’s documentation for information on how to use its custom resource types.
To manage resources on a target system, you should declare them in Puppet manifests. For more details, see the resources page of the Puppet language reference.
You can also browse and manage resources interactively using the
puppet resource
subcommand; run puppet resource --help
for more information.
All types have a special attribute called the namevar. This is the attribute used to uniquely identify a resource on the target system. If you don’t specifically assign a value for the namevar, its value will default to the title of the resource.
Example:
file { '/etc/passwd':
owner => 'root',
group => 'root',
mode => '0644',
}
In this code, /etc/passwd
is the title of the file resource; other Puppet
code can refer to the resource as File['/etc/passwd']
to declare
relationships. Because path
is the namevar for the file type and we did not
provide a value for it, the value of path
will default to /etc/passwd
.
The attributes (sometimes called parameters) of a resource determine its
desired state. They either directly modify the system (internally, these are
called “properties”) or they affect how the resource behaves (e.g., adding a
search path for exec
resources or controlling directory recursion on file
resources).
Providers implement the same resource type on different kinds of systems. They usually do this by calling out to external commands.
Although Puppet will automatically select an appropriate default provider, you
can override the default with the provider
attribute. (For example, package
resources on Red Hat systems default to the yum
provider, but you can specify
provider => gem
to install Ruby libraries with the gem
command.)
Providers often specify binaries that they require. Fully qualified binary paths indicate that the binary must exist at that specific path, and unqualified paths indicate that Puppet will search for the binary using the shell path.
Features are abilities that some providers may not support. Generally, a
feature will correspond to some allowed values for a resource attribute; for
example, if a package
provider supports the purgeable
feature, you can
specify ensure => purged
to delete config files installed by the package.
Resource types define the set of features they can use, and providers can declare which features they provide.
Apply a change or an array of changes to the filesystem using the augeas tool.
Requires:
Sample usage with a string:
augeas{"test1" :
context => "/files/etc/sysconfig/firstboot",
changes => "set RUN_FIRSTBOOT YES",
onlyif => "match other_value size > 0",
}
Sample usage with an array and custom lenses:
augeas{"jboss_conf":
context => "/files",
changes => [
"set etc/jbossas/jbossas.conf/JBOSS_IP $ipaddress",
"set etc/jbossas/jbossas.conf/JAVA_HOME /usr",
],
load_path => "$/usr/share/jbossas/lenses",
}
augeas { 'resource title':
name => # (namevar) The name of this task. Used for...
changes => # The changes which should be applied to the...
context => # Optional context path. This value is prepended...
force => # Optional command to force the augeas type to...
incl => # Load only a specific file, e.g. `/etc/hosts`...
lens => # Use a specific lens, e.g. `Hosts.lns`. When this
load_path => # Optional colon-separated list or array of...
onlyif => # Optional augeas command and comparisons to...
provider => # The specific backend to use for this `augeas...
returns => # The expected return code from the augeas...
root => # A file system path; all files loaded by Augeas...
show_diff => # Whether to display differences when the file...
type_check => # Whether augeas should perform typechecking...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The name of this task. Used for uniqueness.
The changes which should be applied to the filesystem. This can be a command or an array of commands. The following commands are supported:
set <PATH> <VALUE>
— Sets the value VALUE
at location PATH
setm <PATH> <SUB> <VALUE>
— Sets multiple nodes (matching SUB
relative to PATH
) to VALUE
rm <PATH>
— Removes the node at location PATH
remove <PATH>
— Synonym for rm
clear <PATH>
— Sets the node at PATH
to NULL
, creating it if neededclearm <PATH> <SUB>
— Sets multiple nodes (matching SUB
relative to PATH
) to NULL
touch <PATH>
— Creates PATH
with the value NULL
if it does not existins <LABEL> (before|after) <PATH>
— Inserts an empty node LABEL
either before or after PATH
.insert <LABEL> <WHERE> <PATH>
— Synonym for ins
mv <PATH> <OTHER PATH>
— Moves a node at PATH
to the new location OTHER PATH
move <PATH> <OTHER PATH>
— Synonym for mv
rename <PATH> <LABEL>
— Rename a node at PATH
to a new LABEL
defvar <NAME> <PATH>
— Sets Augeas variable $NAME
to PATH
defnode <NAME> <PATH> <VALUE>
— Sets Augeas variable $NAME
to PATH
, creating it with VALUE
if neededIf the context
parameter is set, that value is prepended to any relative PATH
s.
Optional context path. This value is prepended to the paths of all
changes if the path is relative. If the incl
parameter is set,
defaults to /files + incl
; otherwise, defaults to the empty string.
Optional command to force the augeas type to execute even if it thinks changes
will not be made. This does not override the onlyif
parameter.
Load only a specific file, e.g. /etc/hosts
. This can greatly speed
up the execution the resource. When this parameter is set, you must also
set the lens
parameter to indicate which lens to use.
Use a specific lens, e.g. Hosts.lns
. When this parameter is set, you
must also set the incl
parameter to indicate which file to load.
The Augeas documentation includes a list of available lenses.
Optional colon-separated list or array of directories; these directories are searched for schema definitions. The agent’s $libdir/augeas/lenses
path will always be added to support pluginsync.
Optional augeas command and comparisons to control the execution of this type.
Note: values
is not an actual augeas API command. It calls match
to retrieve an array of paths
in
Supported onlyif syntax:
get <AUGEAS_PATH> <COMPARATOR> <STRING>
values <MATCH_PATH> include <STRING>
values <MATCH_PATH> not_include <STRING>
values <MATCH_PATH> == <AN_ARRAY>
values <MATCH_PATH> != <AN_ARRAY>
match <MATCH_PATH> size <COMPARATOR> <INT>
match <MATCH_PATH> include <STRING>
match <MATCH_PATH> not_include <STRING>
match <MATCH_PATH> == <AN_ARRAY>
match <MATCH_PATH> != <AN_ARRAY>
where:
AUGEAS_PATH
is a valid path scoped by the contextMATCH_PATH
is a valid match syntax scoped by the contextCOMPARATOR
is one of >, >=, !=, ==, <=,
or <
STRING
is a stringINT
is a numberAN_ARRAY
is in the form ['a string', 'another']
The specific backend to use for this augeas
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
(Property: This attribute represents concrete state on the target system.)
The expected return code from the augeas command. Should not be set.
A file system path; all files loaded by Augeas are loaded underneath root
.
Whether to display differences when the file changes, defaulting to
true. This parameter is useful for files that may contain passwords or
other secret data, which might otherwise be included in Puppet reports or
other insecure outputs. If the global show_diff
setting
is false, then no diffs will be shown even if this parameter is true.
Valid values are true
, false
, yes
, no
.
Whether augeas should perform typechecking. Defaults to false.
Valid values are true
, false
.
execute_changes
, need_to_run?
, parse_commands
.Available features:
execute_changes
— Actually make the changesneed_to_run?
— If the command should runparse_commands
— Parse the command stringProvider support:
Provider | execute changes | need to run? | parse commands |
---|---|---|---|
augeas | X | X | X |
Computer object management using DirectoryService on OS X.
Note that these are distinctly different kinds of objects to ‘hosts’, as they require a MAC address and can have all sorts of policy attached to them.
This provider only manages Computer objects in the local directory service domain, not in remote directories.
If you wish to manage /etc/hosts
file on Mac OS X, then simply use the host
type as per other platforms.
This type primarily exists to create localhost Computer objects that MCX policy can then be attached to.
Autorequires: If Puppet is managing the plist file representing a
Computer object (located at /var/db/dslocal/nodes/Default/computers/{name}.plist
),
the Computer resource will autorequire it.
computer { 'resource title':
name => # (namevar) The authoritative 'short' name of the computer...
ensure => # Control the existences of this computer record...
en_address => # The MAC address of the primary network...
ip_address => # The IP Address of the Computer...
provider => # The specific backend to use for this `computer...
realname => # The 'long' name of the computer...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The authoritative ‘short’ name of the computer record.
(↑ Back to computer attributes)
(Property: This attribute represents concrete state on the target system.)
Control the existences of this computer record. Set this attribute to
present
to ensure the computer record exists. Set it to absent
to delete any computer records with this name
Valid values are present
, absent
.
(↑ Back to computer attributes)
(Property: This attribute represents concrete state on the target system.)
The MAC address of the primary network interface. Must match en0.
(↑ Back to computer attributes)
(Property: This attribute represents concrete state on the target system.)
The IP Address of the Computer object.
(↑ Back to computer attributes)
The specific backend to use for this computer
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
(↑ Back to computer attributes)
The ‘long’ name of the computer record.
(↑ Back to computer attributes)
Computer object management using DirectoryService on OS X. Note that these are distinctly different kinds of objects to ‘hosts’, as they require a MAC address and can have all sorts of policy attached to them.
This provider only manages Computer objects in the local directory service domain, not in remote directories.
If you wish to manage /etc/hosts on Mac OS X, then simply use the host type as per other platforms.
operatingsystem
== darwin
.Installs and manages cron jobs. Every cron resource created by Puppet
requires a command and at least one periodic attribute (hour, minute,
month, monthday, weekday, or special). While the name of the cron job is
not part of the actual job, the name is stored in a comment beginning with
# Puppet Name:
. These comments are used to match crontab entries created
by Puppet with cron resources.
If an existing crontab entry happens to match the scheduling and command of a
cron resource that has never been synched, Puppet will defer to the existing
crontab entry and will not create a new entry tagged with the # Puppet Name:
comment.
Example:
cron { 'logrotate':
command => '/usr/sbin/logrotate',
user => 'root',
hour => 2,
minute => 0,
}
Note that all periodic attributes can be specified as an array of values:
cron { 'logrotate':
command => '/usr/sbin/logrotate',
user => 'root',
hour => [2, 4],
}
…or using ranges or the step syntax */2
(although there’s no guarantee
that your cron
daemon supports these):
cron { 'logrotate':
command => '/usr/sbin/logrotate',
user => 'root',
hour => ['2-4'],
minute => '*/10',
}
An important note: the Cron type will not reset parameters that are
removed from a manifest. For example, removing a minute => 10
parameter
will not reset the minute component of the associated cronjob to *
.
These changes must be expressed by setting the parameter to
minute => absent
because Puppet only manages parameters that are out of
sync with manifest entries.
Autorequires: If Puppet is managing the user account specified by the
user
property of a cron resource, then the cron resource will autorequire
that user.
cron { 'resource title':
name => # (namevar) The symbolic name of the cron job. This name is
ensure => # The basic property that the resource should be...
command => # The command to execute in the cron job. The...
environment => # Any environment settings associated with this...
hour => # The hour at which to run the cron job. Optional;
minute => # The minute at which to run the cron job...
month => # The month of the year. Optional; if specified...
monthday => # The day of the month on which to run the...
provider => # The specific backend to use for this `cron...
special => # A special value such as 'reboot' or 'annually'...
target => # The name of the crontab file in which the cron...
user => # The user who owns the cron job. This user must...
weekday => # The weekday on which to run the command...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The symbolic name of the cron job. This name is used for human reference only and is generated automatically for cron jobs found on the system. This generally won’t matter, as Puppet will do its best to match existing cron jobs against specified jobs (and Puppet adds a comment to cron jobs it adds), but it is at least possible that converting from unmanaged jobs to managed jobs might require manual intervention.
(Property: This attribute represents concrete state on the target system.)
The basic property that the resource should be in.
Valid values are present
, absent
.
(Property: This attribute represents concrete state on the target system.)
The command to execute in the cron job. The environment provided to the command varies by local system rules, and it is best to always provide a fully qualified command. The user’s profile is not sourced when the command is run, so if the user’s environment is desired it should be sourced manually.
All cron parameters support absent
as a value; this will
remove any existing values for that field.
(Property: This attribute represents concrete state on the target system.)
Any environment settings associated with this cron job. They will be stored between the header and the job in the crontab. There can be no guarantees that other, earlier settings will not also affect a given cron job.
Also, Puppet cannot automatically determine whether an existing, unmanaged environment setting is associated with a given cron job. If you already have cron jobs with environment settings, then Puppet will keep those settings in the same place in the file, but will not associate them with a specific job.
Settings should be specified exactly as they should appear in
the crontab, e.g., PATH=/bin:/usr/bin:/usr/sbin
.
(Property: This attribute represents concrete state on the target system.)
The hour at which to run the cron job. Optional; if specified, must be between 0 and 23, inclusive.
(Property: This attribute represents concrete state on the target system.)
The minute at which to run the cron job. Optional; if specified, must be between 0 and 59, inclusive.
(Property: This attribute represents concrete state on the target system.)
The month of the year. Optional; if specified must be between 1 and 12 or the month name (e.g., December).
(Property: This attribute represents concrete state on the target system.)
The day of the month on which to run the command. Optional; if specified, must be between 1 and 31.
The specific backend to use for this cron
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
(Property: This attribute represents concrete state on the target system.)
A special value such as ‘reboot’ or ‘annually’. Only available on supported systems such as Vixie Cron. Overrides more specific time of day/week settings. Set to ‘absent’ to make puppet revert to a plain numeric schedule.
(Property: This attribute represents concrete state on the target system.)
The name of the crontab file in which the cron job should be stored.
This property defaults to the value of the user
property if set, the
user running Puppet or root
.
For the default crontab provider, this property is functionally
equivalent to the user
property and should be avoided. In particular,
setting both user
and target
to different values will result in
undefined behavior.
(Property: This attribute represents concrete state on the target system.)
The user who owns the cron job. This user must be allowed to run cron jobs, which is not currently checked by Puppet.
This property defaults to the user running Puppet or root
.
The default crontab provider executes the system crontab
using
the user account specified by this property.
(Property: This attribute represents concrete state on the target system.)
The weekday on which to run the command. Optional; if specified, must be between 0 and 7, inclusive, with 0 (or 7) being Sunday, or must be the name of the day (e.g., Tuesday).
crontab
.Executes external commands.
Any command in an exec
resource must be able to run multiple times
without causing harm — that is, it must be idempotent. There are three
main ways for an exec to be idempotent:
apt-get update
.)onlyif
, unless
, or creates
attribute, which prevents
Puppet from running the command unless some condition is met.refreshonly => true
, which only allows Puppet to run the
command when some other resource is changed. (See the notes on refreshing
below.)A caution: There’s a widespread tendency to use collections of execs to manage resources that aren’t covered by an existing resource type. This works fine for simple tasks, but once your exec pile gets complex enough that you really have to think to understand what’s happening, you should consider developing a custom resource type instead, as it will be much more predictable and maintainable.
Refresh: exec
resources can respond to refresh events (via
notify
, subscribe
, or the ~>
arrow). The refresh behavior of execs
is non-standard, and can be affected by the refresh
and
refreshonly
attributes:
refreshonly
is set to true, the exec will only run when it receives an
event. This is the most reliable way to use refresh with execs.onlyif
, unless
, or creates
condition
is no longer met after the first run, the second run will not occur.)refresh
command, and receives an
event, it will run its normal command, then run its refresh
command
(as long as any onlyif
, unless
, or creates
conditions are still met
after the normal command finishes).onlyif
, unless
, or creates
attribute) and receives an event, it still will not run.noop => true
, would otherwise have run, and receives
an event from a non-noop resource, it will run once (or run its refresh
command instead, if it has one).In short: If there’s a possibility of your exec receiving refresh events, it becomes doubly important to make sure the run conditions are restricted.
Autorequires: If Puppet is managing an exec’s cwd or the executable file used in an exec’s command, the exec resource will autorequire those files. If Puppet is managing the user that an exec should run as, the exec resource will autorequire that user.
exec { 'resource title':
command => # (namevar) The actual command to execute. Must either be...
creates => # A file to look for before running the command...
cwd => # The directory from which to run the command. If
environment => # Any additional environment variables you want to
group => # The group to run the command as. This seems to...
logoutput => # Whether to log command output in addition to...
onlyif => # A test command that checks the state of the...
path => # The search path used for command execution...
provider => # The specific backend to use for this `exec...
refresh => # An alternate command to run when the `exec...
refreshonly => # The command should only be run as a refresh...
returns => # The expected exit code(s). An error will be...
timeout => # The maximum time the command should take. If...
tries => # The number of times execution of the command...
try_sleep => # The time to sleep in seconds between...
umask => # Sets the umask to be used while executing this...
unless => # A test command that checks the state of the...
user => # The user to run the command as. Note that if...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The actual command to execute. Must either be fully qualified
or a search path for the command must be provided. If the command
succeeds, any output produced will be logged at the instance’s
normal log level (usually notice
), but if the command fails
(meaning its return code does not match the specified code) then
any output is logged at the err
log level.
A file to look for before running the command. The command will only run if the file doesn’t exist.
This parameter doesn’t cause Puppet to create a file; it is only useful if the command itself creates a file.
exec { 'tar -xf /Volumes/nfs02/important.tar':
cwd => '/var/tmp',
creates => '/var/tmp/myfile',
path => ['/usr/bin', '/usr/sbin',],
}
In this example, myfile
is assumed to be a file inside
important.tar
. If it is ever deleted, the exec will bring it
back by re-extracting the tarball. If important.tar
does not
actually contain myfile
, the exec will keep running every time
Puppet runs.
The directory from which to run the command. If this directory does not exist, the command will fail.
Any additional environment variables you want to set for a
command. Note that if you use this to set PATH, it will override
the path
attribute. Multiple environment variables should be
specified as an array.
The group to run the command as. This seems to work quite haphazardly on different platforms – it is a platform issue not a Ruby or Puppet one, since the same variety exists when running commands as different users in the shell.
Whether to log command output in addition to logging the
exit code. Defaults to on_failure
, which only logs the output
when the command has an exit code that does not match any value
specified by the returns
attribute. As with any resource type,
the log level can be controlled with the loglevel
metaparameter.
Valid values are true
, false
, on_failure
.
A test command that checks the state of the target system and restricts
when the exec
can run. If present, Puppet runs this test command
first, and only runs the main command if the test has an exit code of 0
(success). For example:
exec { 'logrotate':
path => '/usr/bin:/usr/sbin:/bin',
provider => shell,
onlyif => 'test `du /var/log/messages | cut -f1` -gt 100000',
}
This would run logrotate
only if that test returns true.
Note that this test command runs with the same provider
, path
,
user
, and group
as the main command. If the path
isn’t set, you
must fully qualify the command’s name.
This parameter can also take an array of commands. For example:
onlyif => ['test -f /tmp/file1', 'test -f /tmp/file2'],
This exec
would only run if every command in the array has an
exit code of 0 (success).
The search path used for command execution. Commands must be fully qualified if no path is specified. Paths can be specified as an array or as a ‘:’ separated list.
The specific backend to use for this exec
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
An alternate command to run when the exec
receives a refresh event
from another resource. By default, Puppet runs the main command again.
For more details, see the notes about refresh behavior above, in the
description for this resource type.
Note that this alternate command runs with the same provider
, path
,
user
, and group
as the main command. If the path
isn’t set, you
must fully qualify the command’s name.
The command should only be run as a refresh mechanism for when a dependent object is changed. It only makes sense to use this option when this command depends on some other object; it is useful for triggering an action:
# Pull down the main aliases file
file { '/etc/aliases':
source => 'puppet://server/module/aliases',
}
# Rebuild the database, but only when the file changes
exec { newaliases:
path => ['/usr/bin', '/usr/sbin'],
subscribe => File['/etc/aliases'],
refreshonly => true,
}
Note that only subscribe
and notify
can trigger actions, not require
,
so it only makes sense to use refreshonly
with subscribe
or notify
.
Valid values are true
, false
.
(Property: This attribute represents concrete state on the target system.)
The expected exit code(s). An error will be returned if the executed command has some other exit code. Defaults to 0. Can be specified as an array of acceptable exit codes or a single value.
On POSIX systems, exit codes are always integers between 0 and 255.
On Windows, most exit codes should be integers between 0 and 2147483647.
Larger exit codes on Windows can behave inconsistently across different tools. The Win32 APIs define exit codes as 32-bit unsigned integers, but both the cmd.exe shell and the .NET runtime cast them to signed integers. This means some tools will report negative numbers for exit codes above 2147483647. (For example, cmd.exe reports 4294967295 as -1.) Since Puppet uses the plain Win32 APIs, it will report the very large number instead of the negative number, which might not be what you expect if you got the exit code from a cmd.exe session.
Microsoft recommends against using negative/very large exit codes, and you should avoid them when possible. To convert a negative exit code to the positive one Puppet will use, add it to 4294967296.
The maximum time the command should take. If the command takes longer than the timeout, the command is considered to have failed and will be stopped. The timeout is specified in seconds. The default timeout is 300 seconds and you can set it to 0 to disable the timeout.
The number of times execution of the command should be tried. Defaults to ‘1’. This many attempts will be made to execute the command until an acceptable return code is returned. Note that the timeout parameter applies to each try rather than to the complete set of tries.
The time to sleep in seconds between ‘tries’.
Sets the umask to be used while executing this command
A test command that checks the state of the target system and restricts
when the exec
can run. If present, Puppet runs this test command
first, then runs the main command unless the test has an exit code of 0
(success). For example:
exec { '/bin/echo root >> /usr/lib/cron/cron.allow':
path => '/usr/bin:/usr/sbin:/bin',
unless => 'grep root /usr/lib/cron/cron.allow 2>/dev/null',
}
This would add root
to the cron.allow file (on Solaris) unless
grep
determines it’s already there.
Note that this test command runs with the same provider
, path
,
user
, and group
as the main command. If the path
isn’t set, you
must fully qualify the command’s name.
This parameter can also take an array of commands. For example:
unless => ['test -f /tmp/file1', 'test -f /tmp/file2'],
This exec
would only run if every command in the array has a
non-zero exit code.
The user to run the command as. Note that if you use this then any error output is not currently captured. This is because of a bug within Ruby. If you are using Puppet to create this user, the exec will automatically require the user, as long as it is specified by name.
Please note that the $HOME environment variable is not automatically set when using this attribute.
Executes external binaries directly, without passing through a shell or performing any interpolation. This is a safer and more predictable way to execute most commands, but prevents the use of globbing and shell built-ins (including control logic like “for” and “if” statements).
feature
== posix
.Passes the provided command through /bin/sh
; only available on
POSIX systems. This allows the use of shell globbing and built-ins, and
does not require that the path to a command be fully-qualified. Although
this can be more convenient than the posix
provider, it also means that
you need to be more careful with escaping; as ever, with great power comes
etc. etc.
This provider closely resembles the behavior of the exec
type
in Puppet 0.25.x.
Execute external binaries on Windows systems. As with the posix
provider, this provider directly calls the command with the arguments
given, without passing it through a shell or performing any interpolation.
To use shell built-ins — that is, to emulate the shell
provider on
Windows — a command must explicitly invoke the shell:
exec {'echo foo':
command => 'cmd.exe /c echo "foo"',
}
If no extension is specified for a command, Windows will use the PATHEXT
environment variable to locate the executable.
Note on PowerShell scripts: PowerShell’s default restricted
execution policy doesn’t allow it to run saved scripts. To run PowerShell
scripts, specify the remotesigned
execution policy as part of the
command:
exec { 'test':
path => 'C:/Windows/System32/WindowsPowerShell/v1.0',
command => 'powershell -executionpolicy remotesigned -file C:/test.ps1',
}
operatingsystem
== windows
.Manages files, including their content, ownership, and permissions.
The file
type can manage normal files, directories, and symlinks; the
type should be specified in the ensure
attribute.
File contents can be managed directly with the content
attribute, or
downloaded from a remote source using the source
attribute; the latter
can also be used to recursively serve directories (when the recurse
attribute is set to true
or local
). On Windows, note that file
contents are managed in binary mode; Puppet never automatically translates
line endings.
Autorequires: If Puppet is managing the user or group that owns a file, the file resource will autorequire them. If Puppet is managing any parent directories of a file, the file resource will autorequire them.
file { 'resource title':
path => # (namevar) The path to the file to manage. Must be fully...
ensure => # Whether the file should exist, and if so what...
backup => # Whether (and how) file content should be backed...
checksum => # The checksum type to use when determining...
checksum_value => # The checksum of the source contents. Only md5...
content => # The desired contents of a file, as a string...
ctime => # A read-only state to check the file ctime. On...
force => # Perform the file operation even if it will...
group => # Which group should own the file. Argument can...
ignore => # A parameter which omits action on files matching
links => # How to handle links during file actions. During
mode => # The desired permissions mode for the file, in...
mtime => # A read-only state to check the file mtime. On...
owner => # The user to whom the file should belong....
provider => # The specific backend to use for this `file...
purge => # Whether unmanaged files should be purged. This...
recurse => # Whether to recursively manage the _contents_ of...
recurselimit => # How far Puppet should descend into...
replace => # Whether to replace a file or symlink that...
selinux_ignore_defaults => # If this is set then Puppet will not ask SELinux...
selrange => # What the SELinux range component of the context...
selrole => # What the SELinux role component of the context...
seltype => # What the SELinux type component of the context...
seluser => # What the SELinux user component of the context...
show_diff => # Whether to display differences when the file...
source => # A source file, which will be copied into place...
source_permissions => # Whether (and how) Puppet should copy owner...
sourceselect => # Whether to copy all valid sources, or just the...
target => # The target for creating a link. Currently...
type => # A read-only state to check the file...
validate_cmd => # A command for validating the file's syntax...
validate_replacement => # The replacement string in a `validate_cmd` that...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The path to the file to manage. Must be fully qualified.
On Windows, the path should include the drive letter and should use /
as
the separator character (rather than \\
).
(Property: This attribute represents concrete state on the target system.)
Whether the file should exist, and if so what kind of file it should be.
Possible values are present
, absent
, file
, directory
, and link
.
present
accepts any form of file existence, and creates a
normal file if the file is missing. (The file will have no content
unless the content
or source
attribute is used.)absent
ensures the file doesn’t exist, and deletes it if necessary.file
ensures it’s a normal file, and enables use of the content
or
source
attribute.directory
ensures it’s a directory, and enables use of the source
,
recurse
, recurselimit
, ignore
, and purge
attributes.link
ensures the file is a symlink, and requires that you also
set the target
attribute. Symlinks are supported on all Posix
systems and on Windows Vista / 2008 and higher. On Windows, managing
symlinks requires Puppet agent’s user account to have the “Create
Symbolic Links” privilege; this can be configured in the “User Rights
Assignment” section in the Windows policy editor. By default, Puppet
agent runs as the Administrator account, which has this privilege.Puppet avoids destroying directories unless the force
attribute is set
to true
. This means that if a file is currently a directory, setting
ensure
to anything but directory
or present
will cause Puppet to
skip managing the resource and log either a notice or an error.
There is one other non-standard value for ensure
. If you specify the
path to another file as the ensure value, it is equivalent to specifying
link
and using that path as the target
:
# Equivalent resources:
file { '/etc/inetd.conf':
ensure => '/etc/inet/inetd.conf',
}
file { '/etc/inetd.conf':
ensure => link,
target => '/etc/inet/inetd.conf',
}
However, we recommend using link
and target
explicitly, since this
behavior can be harder to read and is
deprecated
as of Puppet 4.3.0.
Valid values are absent
(also called false
), file
, present
, directory
, link
. Values can match /./
.
Whether (and how) file content should be backed up before being replaced.
This attribute works best as a resource default in the site manifest
(File { backup => main }
), so it can affect all file resources.
false
, file content won’t be backed up..
(e.g., .puppet-bak
), Puppet will
use copy the file in the same directory with that value as the extension
of the backup. (A value of true
is a synonym for .puppet-bak
.)filebucket
resource type for more details.
(This is the preferred method for backup, since it can be centralized
and queried.)Default value: puppet
, which backs up to a filebucket of the same name.
(Puppet automatically creates a local filebucket named puppet
if one
doesn’t already exist.)
Backing up to a local filebucket isn’t particularly useful. If you want
to make organized use of backups, you will generally want to use the
puppet master server’s filebucket service. This requires declaring a
filebucket resource and a resource default for the backup
attribute
in site.pp:
# /etc/puppetlabs/puppet/manifests/site.pp
filebucket { 'main':
path => false, # This is required for remote filebuckets.
server => 'puppet.example.com', # Optional; defaults to the configured puppet master.
}
File { backup => main, }
If you are using multiple puppet master servers, you will want to centralize the contents of the filebucket. Either configure your load balancer to direct all filebucket traffic to a single master, or use something like an out-of-band rsync task to synchronize the content on all masters.
The checksum type to use when determining whether to replace a file’s contents.
The default checksum type is md5.
Valid values are md5
, md5lite
, sha256
, sha256lite
, mtime
, ctime
, none
.
(Property: This attribute represents concrete state on the target system.)
The checksum of the source contents. Only md5 and sha256 are supported when specifying this parameter. If this parameter is set, source_permissions will be assumed to be false, and ownership and permissions will not be read from source.
(Property: This attribute represents concrete state on the target system.)
The desired contents of a file, as a string. This attribute is mutually
exclusive with source
and target
.
Newlines and tabs can be specified in double-quoted strings using standard escaped syntax — \n for a newline, and \t for a tab.
With very small files, you can construct content strings directly in the manifest…
define resolve(nameserver1, nameserver2, domain, search) {
$str = "search ${search}
domain ${domain}
nameserver ${nameserver1}
nameserver ${nameserver2}
"
file { '/etc/resolv.conf':
content => $str,
}
}
…but for larger files, this attribute is more useful when combined with the template or file function.
(Property: This attribute represents concrete state on the target system.)
A read-only state to check the file ctime. On most modern *nix-like systems, this is the time of the most recent change to the owner, group, permissions, or content of the file.
Perform the file operation even if it will destroy one or more directories.
You must use force
in order to:
purge
subdirectoriesensure => absent
Valid values are true
, false
, yes
, no
.
(Property: This attribute represents concrete state on the target system.)
Which group should own the file. Argument can be either a group name or a group ID.
On Windows, a user (such as “Administrator”) can be set as a file’s group
and a group (such as “Administrators”) can be set as a file’s owner;
however, a file’s owner and group shouldn’t be the same. (If the owner
is also the group, files with modes like 0640
will cause log churn, as
they will always appear out of sync.)
A parameter which omits action on files matching
specified patterns during recursion. Uses Ruby’s builtin globbing
engine, so shell metacharacters are fully supported, e.g. [a-z]*
.
Matches that would descend into the directory structure are ignored,
e.g., */*
.
How to handle links during file actions. During file copying,
follow
will copy the target file instead of the link and manage
will copy the link itself. When not copying, manage
will manage
the link, and follow
will manage the file to which the link points.
Valid values are follow
, manage
.
(Property: This attribute represents concrete state on the target system.)
The desired permissions mode for the file, in symbolic or numeric notation. This value must be specified as a string; do not use un-quoted numbers to represent file modes.
If the mode is omitted (or explicitly set to undef
), Puppet does not
enforce permissions on existing files and creates new files with
permissions of 0644
.
The file
type uses traditional Unix permission schemes and translates
them to equivalent permissions for systems which represent permissions
differently, including Windows. For detailed ACL controls on Windows,
you can leave mode
unmanaged and use
the puppetlabs/acl module.
Numeric modes should use the standard octal notation of
<SETUID/SETGID/STICKY><OWNER><GROUP><OTHER>
(e.g. ‘0644’).
Symbolic modes should be represented as a string of comma-separated
permission clauses, in the form <WHO><OP><PERM>
:
Thus, mode 0664
could be represented symbolically as either a=r,ug+w
or ug=rw,o=r
. However, symbolic modes are more expressive than numeric
modes: a mode only affects the specified bits, so mode => 'ug+w'
will
set the user and group write bits, without affecting any other bits.
See the manual page for GNU or BSD chmod
for more details
on numeric and symbolic modes.
On Windows, permissions are translated as follows:
FILE_GENERIC_READ
,
FILE_GENERIC_WRITE
, and FILE_GENERIC_EXECUTE
access rights; a
file’s owner always has the FULL_CONTROL
right(Property: This attribute represents concrete state on the target system.)
A read-only state to check the file mtime. On *nix-like systems, this is the time of the most recent change to the content of the file.
(Property: This attribute represents concrete state on the target system.)
The user to whom the file should belong. Argument can be a user name or a user ID.
On Windows, a group (such as “Administrators”) can be set as a file’s owner
and a user (such as “Administrator”) can be set as a file’s group; however,
a file’s owner and group shouldn’t be the same. (If the owner is also
the group, files with modes like 0640
will cause log churn, as they
will always appear out of sync.)
The specific backend to use for this file
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
Whether unmanaged files should be purged. This option only makes
sense when ensure => directory
and recurse => true
.
source
attribute, purge => true
will automatically purge any files
that are not in the source directory.purge => true
will purge any files that aren’t being
specifically managed.If you have a filebucket configured, the purged files will be uploaded, but if you do not, this will destroy data.
Unless force => true
is set, purging will not delete directories,
although it will delete the files they contain.
If recurselimit
is set and you aren’t using force => true
, purging
will obey the recursion limit; files in any subdirectories deeper than the
limit will be treated as unmanaged and left alone.
Valid values are true
, false
, yes
, no
.
Whether to recursively manage the contents of a directory. This attribute
is only used when ensure => directory
is set. The allowed values are:
false
— The default behavior. The contents of the directory will not be
automatically managed.remote
— If the source
attribute is set, Puppet will automatically
manage the contents of the source directory (or directories), ensuring
that equivalent files and directories exist on the target system and
that their contents match.
Using remote
will disable the purge
attribute, but results in faster
catalog application than recurse => true
.
The source
attribute is mandatory when recurse => remote
.
true
— If the source
attribute is set, this behaves similarly to
recurse => remote
, automatically managing files from the source directory.
This also enables the purge
attribute, which can delete unmanaged
files from a directory. See the description of purge
for more details.
The source
attribute is not mandatory when using recurse => true
, so you
can enable purging in directories where all files are managed individually.
By default, setting recurse to remote
or true
will manage all
subdirectories. You can use the recurselimit
attribute to limit the
recursion depth.
Valid values are true
, false
, remote
.
How far Puppet should descend into subdirectories, when using
ensure => directory
and either recurse => true
or recurse => remote
.
The recursion limit affects which files will be copied from the source
directory, as well as which files can be purged when purge => true
.
Setting recurselimit => 0
is the same as setting recurse => false
—
Puppet will manage the directory, but all of its contents will be treated
as unmanaged.
Setting recurselimit => 1
will manage files and directories that are
directly inside the directory, but will not manage the contents of any
subdirectories.
Setting recurselimit => 2
will manage the direct contents of the
directory, as well as the contents of the first level of subdirectories.
And so on — 3 will manage the contents of the second level of subdirectories, etc.
Values can match /^[0-9]+$/
.
Whether to replace a file or symlink that already exists on the local system but
whose content doesn’t match what the source
or content
attribute
specifies. Setting this to false allows file resources to initialize files
without overwriting future changes. Note that this only affects content;
Puppet will still manage ownership and permissions. Defaults to true
.
Valid values are true
, false
, yes
, no
.
If this is set then Puppet will not ask SELinux (via matchpathcon) to supply defaults for the SELinux attributes (seluser, selrole, seltype, and selrange). In general, you should leave this set at its default and only set it to true when you need Puppet to not try to fix SELinux labels automatically.
Valid values are true
, false
.
(Property: This attribute represents concrete state on the target system.)
What the SELinux range component of the context of the file should be.
Any valid SELinux range component is accepted. For example s0
or
SystemHigh
. If not specified it defaults to the value returned by
matchpathcon for the file, if any exists. Only valid on systems with
SELinux support enabled and that have support for MCS (Multi-Category
Security).
(Property: This attribute represents concrete state on the target system.)
What the SELinux role component of the context of the file should be.
Any valid SELinux role component is accepted. For example role_r
.
If not specified it defaults to the value returned by matchpathcon for
the file, if any exists. Only valid on systems with SELinux support
enabled.
(Property: This attribute represents concrete state on the target system.)
What the SELinux type component of the context of the file should be.
Any valid SELinux type component is accepted. For example tmp_t
.
If not specified it defaults to the value returned by matchpathcon for
the file, if any exists. Only valid on systems with SELinux support
enabled.
(Property: This attribute represents concrete state on the target system.)
What the SELinux user component of the context of the file should be.
Any valid SELinux user component is accepted. For example user_u
.
If not specified it defaults to the value returned by matchpathcon for
the file, if any exists. Only valid on systems with SELinux support
enabled.
Whether to display differences when the file changes, defaulting to
true. This parameter is useful for files that may contain passwords or
other secret data, which might otherwise be included in Puppet reports or
other insecure outputs. If the global show_diff
setting
is false, then no diffs will be shown even if this parameter is true.
Valid values are true
, false
, yes
, no
.
A source file, which will be copied into place on the local system. This
attribute is mutually exclusive with content
and target
. Allowed
values are:
puppet:
URIs, which point to files in modules or Puppet file server
mount points.file:
URIs, which behave the same as local file paths.http:
URIs, which point to files served by common web serversThe normal form of a puppet:
URI is:
puppet:///modules/<MODULE NAME>/<FILE PATH>
This will fetch a file from a module on the Puppet master (or from a
local module when using Puppet apply). Given a modulepath
of
/etc/puppetlabs/code/modules
, the example above would resolve to
/etc/puppetlabs/code/modules/<MODULE NAME>/files/<FILE PATH>
.
Unlike content
, the source
attribute can be used to recursively copy
directories if the recurse
attribute is set to true
or remote
. If
a source directory contains symlinks, use the links
attribute to
specify whether to recreate links or follow them.
HTTP URIs cannot be used to recursively synchronize whole directory
trees. It is also not possible to use source_permissions
values other
than ignore
. That’s because HTTP servers do not transfer any metadata
that translates to ownership or permission details.
Multiple source
values can be specified as an array, and Puppet will
use the first source that exists. This can be used to serve different
files to different system types:
file { '/etc/nfs.conf':
source => [
"puppet:///modules/nfs/conf.${host}",
"puppet:///modules/nfs/conf.${operatingsystem}",
'puppet:///modules/nfs/conf'
]
}
Alternately, when serving directories recursively, multiple sources can
be combined by setting the sourceselect
attribute to all
.
Whether (and how) Puppet should copy owner, group, and mode permissions from
the source
to file
resources when the permissions are not explicitly
specified. (In all cases, explicit permissions will take precedence.)
Valid values are use
, use_when_creating
, and ignore
:
ignore
(the default) will never apply the owner, group, or mode from
the source
when managing a file. When creating new files without explicit
permissions, the permissions they receive will depend on platform-specific
behavior. On POSIX, Puppet will use the umask of the user it is running as.
On Windows, Puppet will use the default DACL associated with the user it is
running as.use
will cause Puppet to apply the owner, group,
and mode from the source
to any files it is managing.use_when_creating
will only apply the owner, group, and mode from the
source
when creating a file; existing files will not have their permissions
overwritten.Valid values are use
, use_when_creating
, ignore
.
Whether to copy all valid sources, or just the first one. This parameter
only affects recursive directory copies; by default, the first valid
source is the only one used, but if this parameter is set to all
, then
all valid sources will have all of their contents copied to the local
system. If a given file exists in more than one source, the version from
the earliest source in the list will be used.
Valid values are first
, all
.
(Property: This attribute represents concrete state on the target system.)
The target for creating a link. Currently, symlinks are the
only type supported. This attribute is mutually exclusive with source
and content
.
Symlink targets can be relative, as well as absolute:
# (Useful on Solaris)
file { '/etc/inetd.conf':
ensure => link,
target => 'inet/inetd.conf',
}
Directories of symlinks can be served recursively by instead using the
source
attribute, setting ensure
to directory
, and setting the
links
attribute to manage
.
Valid values are notlink
. Values can match /./
.
(Property: This attribute represents concrete state on the target system.)
A read-only state to check the file type.
A command for validating the file’s syntax before replacing it. If
Puppet would need to rewrite a file due to new source
or content
, it
will check the new content’s validity first. If validation fails, the file
resource will fail.
This command must have a fully qualified path, and should contain a
percent (%
) token where it would expect an input file. It must exit 0
if the syntax is correct, and non-zero otherwise. The command will be
run on the target system while applying the catalog, not on the puppet master.
Example:
file { '/etc/apache2/apache2.conf':
content => 'example',
validate_cmd => '/usr/sbin/apache2 -t -f %',
}
This would replace apache2.conf only if the test returned true.
Note that if a validation command requires a %
as part of its text,
you can specify a different placeholder token with the
validate_replacement
attribute.
The replacement string in a validate_cmd
that will be replaced
with an input file name. Defaults to: %
Uses POSIX functionality to manage file ownership and permissions.
manages_symlinks
.Uses Microsoft Windows functionality to manage file ownership and permissions.
manages_symlinks
.Available features:
manages_symlinks
— The provider can manage symbolic links.Provider support:
Provider | manages symlinks |
---|---|
posix | X |
windows | X |
A repository for storing and retrieving file content by MD5 checksum. Can be local to each agent node, or centralized on a puppet master server. All puppet masters provide a filebucket service that agent nodes can access via HTTP, but you must declare a filebucket resource before any agents will do so.
Filebuckets are used for the following features:
file
type’s backup
attribute is set to
the name of a filebucket, Puppet will back up the old content whenever
it rewrites a file; see the documentation for the file
type for more
details. These backups can be used for manual recovery of content, but
are more commonly used to display changes and differences in a tool like
Puppet Dashboard.static_compiler
section in the catalog indirection docs.To use a central filebucket for backups, you will usually want to declare
a filebucket resource and a resource default for the backup
attribute
in site.pp:
# /etc/puppetlabs/puppet/manifests/site.pp
filebucket { 'main':
path => false, # This is required for remote filebuckets.
server => 'puppet.example.com', # Optional; defaults to the configured puppet master.
}
File { backup => main, }
Puppet master servers automatically provide the filebucket service, so
this will work in a default configuration. If you have a heavily
restricted auth.conf
file, you may need to allow access to the
file_bucket_file
endpoint.
filebucket { 'resource title':
name => # (namevar) The name of the...
path => # The path to the _local_ filebucket; defaults to...
port => # The port on which the remote server is...
server => # The server providing the remote filebucket...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The name of the filebucket.
(↑ Back to filebucket attributes)
The path to the local filebucket; defaults to the value of the
clientbucketdir
setting. To use a remote filebucket, you must set
this attribute to false
.
(↑ Back to filebucket attributes)
The port on which the remote server is listening. Defaults to the
value of the masterport
setting, which is usually 8140.
(↑ Back to filebucket attributes)
The server providing the remote filebucket service. Defaults to the
value of the server
setting (that is, the currently configured
puppet master server).
This setting is only consulted if the path
attribute is set to false
.
(↑ Back to filebucket attributes)
Manage groups. On most platforms this can only create groups. Group membership must be managed on individual users.
On some platforms such as OS X, group membership is managed as an attribute of the group, not the user record. Providers must have the feature ‘manages_members’ to manage the ‘members’ property of a group record.
group { 'resource title':
name => # (namevar) The group name. While naming limitations vary by
ensure => # Create or remove the group. Valid values are...
allowdupe => # Whether to allow duplicate GIDs. Defaults to...
attribute_membership => # AIX only. Configures the behavior of the...
attributes => # Specify group AIX attributes, as an array of...
auth_membership => # Configures the behavior of the `members...
forcelocal => # Forces the management of local accounts when...
gid => # The group ID. Must be specified numerically....
ia_load_module => # The name of the I&A module to use to manage this
members => # The members of the group. For platforms or...
provider => # The specific backend to use for this `group...
system => # Whether the group is a system group with lower...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The group name. While naming limitations vary by operating system, it is advisable to restrict names to the lowest common denominator, which is a maximum of 8 characters beginning with a letter.
Note that Puppet considers group names to be case-sensitive, regardless of the platform’s own rules; be sure to always use the same case when referring to a given group.
(Property: This attribute represents concrete state on the target system.)
Create or remove the group.
Valid values are present
, absent
.
Whether to allow duplicate GIDs. Defaults to false
.
Valid values are true
, false
, yes
, no
.
AIX only. Configures the behavior of the attributes
parameter.
minimum
(default) — The provided list of attributes is partial, and Puppet
ignores any attributes that aren’t listed there.inclusive
— The provided list of attributes is comprehensive, and
Puppet purges any attributes that aren’t listed there.Valid values are inclusive
, minimum
.
(Property: This attribute represents concrete state on the target system.)
Specify group AIX attributes, as an array of 'key=value'
strings. This
parameter’s behavior can be configured with attribute_membership
.
Requires features manages_aix_lam.
Configures the behavior of the members
parameter.
false
(default) — The provided list of group members is partial,
and Puppet ignores any members that aren’t listed there.true
— The provided list of of group members is comprehensive, and
Puppet purges any members that aren’t listed there.Valid values are true
, false
, yes
, no
.
Forces the management of local accounts when accounts are also being managed by some other NSS
Valid values are true
, false
, yes
, no
.
Requires features libuser.
(Property: This attribute represents concrete state on the target system.)
The group ID. Must be specified numerically. If no group ID is specified when creating a new group, then one will be chosen automatically according to local system standards. This will likely result in the same group having different GIDs on different systems, which is not recommended.
On Windows, this property is read-only and will return the group’s security identifier (SID).
The name of the I&A module to use to manage this user
Requires features manages_aix_lam.
(Property: This attribute represents concrete state on the target system.)
The members of the group. For platforms or directory services where group
membership is stored in the group objects, not the users. This parameter’s
behavior can be configured with auth_membership
.
Requires features manages_members.
The specific backend to use for this group
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
Whether the group is a system group with lower GID.
Valid values are true
, false
, yes
, no
.
Group management for AIX.
/usr/bin/chgroup
, /usr/bin/mkgroup
, /usr/sbin/lsgroup
, /usr/sbin/rmgroup
.operatingsystem
== aix
.manages_aix_lam
, manages_members
.Group management using DirectoryService on OS X.
/usr/bin/dscl
.operatingsystem
== darwin
.manages_members
.Group management via groupadd
and its ilk. The default for most platforms.
groupadd
, groupdel
, groupmod
, lgroupadd
.system_groups
.Group management via LDAP.
This provider requires that you have valid values for all of the
LDAP-related settings in puppet.conf
, including ldapbase
. You will
almost definitely need settings for ldapuser
and ldappassword
in order
for your clients to write to LDAP.
Note that this provider will automatically generate a GID for you if you do not specify one, but it is a potentially expensive operation, as it iterates across all existing groups to pick the appropriate next one.
Group management via pw
on FreeBSD and DragonFly BSD.
pw
.operatingsystem
== freebsd, dragonfly
.manages_members
.Local group management for Windows. Group members can be both users and groups. Additionally, local groups can contain domain users.
operatingsystem
== windows
.manages_members
.Available features:
libuser
— Allows local groups to be managed on systems that also use some other remote NSS method of managing accounts.manages_aix_lam
— The provider can manage AIX Loadable Authentication Module (LAM) system.manages_members
— For directories where membership is an attribute of groups not users.system_groups
— The provider allows you to create system groups with lower GIDs.Provider support:
Provider | libuser | manages aix lam | manages members | system groups |
---|---|---|---|---|
aix | X | X | ||
directoryservice | X | |||
groupadd | X | X | ||
ldap | ||||
pw | X | |||
windows_adsi | X |
Installs and manages host entries. For most systems, these
entries will just be in /etc/hosts
, but some systems (notably OS X)
will have different solutions.
host { 'resource title':
name => # (namevar) The host...
ensure => # The basic property that the resource should be...
comment => # A comment that will be attached to the line with
host_aliases => # Any aliases the host might have. Multiple...
ip => # The host's IP address, IPv4 or...
provider => # The specific backend to use for this `host...
target => # The file in which to store service information.
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The host name.
(Property: This attribute represents concrete state on the target system.)
The basic property that the resource should be in.
Valid values are present
, absent
.
(Property: This attribute represents concrete state on the target system.)
A comment that will be attached to the line with a # character.
(Property: This attribute represents concrete state on the target system.)
Any aliases the host might have. Multiple values must be specified as an array.
(Property: This attribute represents concrete state on the target system.)
The host’s IP address, IPv4 or IPv6.
The specific backend to use for this host
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
(Property: This attribute represents concrete state on the target system.)
The file in which to store service information. Only used by
those providers that write to disk. On most systems this defaults to /etc/hosts
.
This represents a router or switch interface. It is possible to manage interface mode (access or trunking, native vlan and encapsulation) and switchport characteristics (speed, duplex).
interface { 'resource title':
name => # (namevar) The interface's...
ensure => # The basic property that the resource should be...
access_vlan => # Interface static access vlan. Values can match...
allowed_trunk_vlans => # Allowed list of Vlans that this trunk can...
description => # Interface...
device_url => # The URL at which the router or switch can be...
duplex => # Interface duplex. Valid values are `auto`...
encapsulation => # Interface switchport encapsulation. Valid...
etherchannel => # Channel group this interface is part of. Values
ipaddress => # IP Address of this interface. Note that it might
mode => # Interface switchport mode. Valid values are...
native_vlan => # Interface native vlan when trunking. Values can
provider => # The specific backend to use for this `interface`
speed => # Interface speed. Valid values are `auto`...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The interface’s name.
(↑ Back to interface attributes)
(Property: This attribute represents concrete state on the target system.)
The basic property that the resource should be in.
Valid values are present
(also called no_shutdown
), absent
(also called shutdown
).
(↑ Back to interface attributes)
(Property: This attribute represents concrete state on the target system.)
Interface static access vlan.
Values can match /^\d+/
.
(↑ Back to interface attributes)
(Property: This attribute represents concrete state on the target system.)
Allowed list of Vlans that this trunk can forward.
Valid values are all
. Values can match /./
.
(↑ Back to interface attributes)
(Property: This attribute represents concrete state on the target system.)
Interface description.
(↑ Back to interface attributes)
The URL at which the router or switch can be reached.
(↑ Back to interface attributes)
(Property: This attribute represents concrete state on the target system.)
Interface duplex.
Valid values are auto
, full
, half
.
(↑ Back to interface attributes)
(Property: This attribute represents concrete state on the target system.)
Interface switchport encapsulation.
Valid values are none
, dot1q
, isl
, negotiate
.
(↑ Back to interface attributes)
(Property: This attribute represents concrete state on the target system.)
Channel group this interface is part of.
Values can match /^\d+/
.
(↑ Back to interface attributes)
(Property: This attribute represents concrete state on the target system.)
IP Address of this interface. Note that it might not be possible to set an interface IP address; it depends on the interface type and device type.
Valid format of ip addresses are:
eui-64
, link-local
It is also possible to supply an array of values.
(↑ Back to interface attributes)
(Property: This attribute represents concrete state on the target system.)
Interface switchport mode.
Valid values are access
, trunk
, dynamic auto
, dynamic desirable
.
(↑ Back to interface attributes)
(Property: This attribute represents concrete state on the target system.)
Interface native vlan when trunking.
Values can match /^\d+/
.
(↑ Back to interface attributes)
The specific backend to use for this interface
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
(↑ Back to interface attributes)
(Property: This attribute represents concrete state on the target system.)
Interface speed.
Valid values are auto
. Values can match /^\d+/
.
(↑ Back to interface attributes)
Cisco switch/router provider for interface.
Manage the .k5login
file for a user. Specify the full path to
the .k5login
file as the name, and an array of principals as the
principals
attribute.
k5login { 'resource title':
path => # (namevar) The path to the `.k5login` file to manage. Must
ensure => # The basic property that the resource should be...
mode => # The desired permissions mode of the `.k5login...
principals => # The principals present in the `.k5login` file...
provider => # The specific backend to use for this `k5login...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The path to the .k5login
file to manage. Must be fully qualified.
(↑ Back to k5login attributes)
(Property: This attribute represents concrete state on the target system.)
The basic property that the resource should be in.
Valid values are present
, absent
.
(↑ Back to k5login attributes)
(Property: This attribute represents concrete state on the target system.)
The desired permissions mode of the .k5login
file. Defaults to 644
.
(↑ Back to k5login attributes)
(Property: This attribute represents concrete state on the target system.)
The principals present in the .k5login
file. This should be specified as an array.
(↑ Back to k5login attributes)
The specific backend to use for this k5login
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
(↑ Back to k5login attributes)
The k5login provider is the only provider for the k5login type.
Manage the Mac OS X authorization database. See the Apple developer site for more information.
Note that authorization store directives with hyphens in their names have been renamed to use underscores, as Puppet does not react well to hyphens in identifiers.
Autorequires: If Puppet is managing the /etc/authorization
file, each
macauthorization resource will autorequire it.
macauthorization { 'resource title':
name => # (namevar) The name of the right or rule to be managed...
ensure => # The basic property that the resource should be...
allow_root => # Corresponds to `allow-root` in the authorization
auth_class => # Corresponds to `class` in the authorization...
auth_type => # Type --- this can be a `right` or a `rule`. The...
authenticate_user => # Corresponds to `authenticate-user` in the...
comment => # The `comment` attribute for authorization...
group => # A group which the user must authenticate as a...
k_of_n => # How large a subset of rule mechanisms must...
mechanisms => # An array of suitable...
provider => # The specific backend to use for this...
rule => # The rule(s) that this right refers...
session_owner => # Whether the session owner automatically matches...
shared => # Whether the Security Server should mark the...
timeout => # The number of seconds in which the credential...
tries => # The number of tries...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The name of the right or rule to be managed.
Corresponds to key
in Authorization Services. The key is the name
of a rule. A key uses the same naming conventions as a right. The
Security Server uses a rule’s key to match the rule with a right.
Wildcard keys end with a ‘.’. The generic rule has an empty key value.
Any rights that do not match a specific rule use the generic rule.
(↑ Back to macauthorization attributes)
(Property: This attribute represents concrete state on the target system.)
The basic property that the resource should be in.
Valid values are present
, absent
.
(↑ Back to macauthorization attributes)
(Property: This attribute represents concrete state on the target system.)
Corresponds to allow-root
in the authorization store. Specifies
whether a right should be allowed automatically if the requesting process
is running with uid == 0
. AuthorizationServices defaults this attribute
to false if not specified.
Valid values are true
, false
.
(↑ Back to macauthorization attributes)
(Property: This attribute represents concrete state on the target system.)
Corresponds to class
in the authorization store; renamed due
to ‘class’ being a reserved word in Puppet.
Valid values are user
, evaluate-mechanisms
, allow
, deny
, rule
.
(↑ Back to macauthorization attributes)
(Property: This attribute represents concrete state on the target system.)
Type — this can be a right
or a rule
. The comment
type has
not yet been implemented.
Valid values are right
, rule
.
(↑ Back to macauthorization attributes)
(Property: This attribute represents concrete state on the target system.)
Corresponds to authenticate-user
in the authorization store.
Valid values are true
, false
.
(↑ Back to macauthorization attributes)
(Property: This attribute represents concrete state on the target system.)
The comment
attribute for authorization resources.
(↑ Back to macauthorization attributes)
(Property: This attribute represents concrete state on the target system.)
A group which the user must authenticate as a member of. This must be a single group.
(↑ Back to macauthorization attributes)
(Property: This attribute represents concrete state on the target system.)
How large a subset of rule mechanisms must succeed for successful
authentication. If there are ‘n’ mechanisms, then ‘k’ (the integer value
of this parameter) mechanisms must succeed. The most common setting for
this parameter is 1
. If k-of-n
is not set, then every mechanism —
that is, ‘n-of-n’ — must succeed.
(↑ Back to macauthorization attributes)
(Property: This attribute represents concrete state on the target system.)
An array of suitable mechanisms.
(↑ Back to macauthorization attributes)
The specific backend to use for this macauthorization
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
(↑ Back to macauthorization attributes)
(Property: This attribute represents concrete state on the target system.)
The rule(s) that this right refers to.
(↑ Back to macauthorization attributes)
(Property: This attribute represents concrete state on the target system.)
Whether the session owner automatically matches this rule or right.
Corresponds to session-owner
in the authorization store.
Valid values are true
, false
.
(↑ Back to macauthorization attributes)
(Property: This attribute represents concrete state on the target system.)
Whether the Security Server should mark the credentials used to gain this right as shared. The Security Server may use any shared credentials to authorize this right. For maximum security, set sharing to false so credentials stored by the Security Server for one application may not be used by another application.
Valid values are true
, false
.
(↑ Back to macauthorization attributes)
(Property: This attribute represents concrete state on the target system.)
The number of seconds in which the credential used by this rule will expire. For maximum security where the user must authenticate every time, set the timeout to 0. For minimum security, remove the timeout attribute so the user authenticates only once per session.
(↑ Back to macauthorization attributes)
(Property: This attribute represents concrete state on the target system.)
The number of tries allowed.
(↑ Back to macauthorization attributes)
Manage Mac OS X authorization database rules and rights.
/usr/bin/security
.operatingsystem
== darwin
.Creates an email alias in the local alias database.
mailalias { 'resource title':
name => # (namevar) The alias...
ensure => # The basic property that the resource should be...
file => # A file containing the alias's contents. The...
provider => # The specific backend to use for this `mailalias`
recipient => # Where email should be sent. Multiple values...
target => # The file in which to store the aliases. Only...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The alias name.
(↑ Back to mailalias attributes)
(Property: This attribute represents concrete state on the target system.)
The basic property that the resource should be in.
Valid values are present
, absent
.
(↑ Back to mailalias attributes)
(Property: This attribute represents concrete state on the target system.)
A file containing the alias’s contents. The file and the recipient entries are mutually exclusive.
(↑ Back to mailalias attributes)
The specific backend to use for this mailalias
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
(↑ Back to mailalias attributes)
(Property: This attribute represents concrete state on the target system.)
Where email should be sent. Multiple values should be specified as an array. The file and the recipient entries are mutually exclusive.
(↑ Back to mailalias attributes)
(Property: This attribute represents concrete state on the target system.)
The file in which to store the aliases. Only used by those providers that write to disk.
(↑ Back to mailalias attributes)
Manage email lists. This resource type can only create and remove lists; it cannot currently reconfigure them.
maillist { 'resource title':
name => # (namevar) The name of the email...
ensure => # The basic property that the resource should be...
admin => # The email address of the...
description => # The description of the mailing...
mailserver => # The name of the host handling email for the...
password => # The admin...
provider => # The specific backend to use for this `maillist...
webserver => # The name of the host providing web archives and...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The name of the email list.
(↑ Back to maillist attributes)
(Property: This attribute represents concrete state on the target system.)
The basic property that the resource should be in.
Valid values are present
, absent
, purged
.
(↑ Back to maillist attributes)
The email address of the administrator.
(↑ Back to maillist attributes)
The description of the mailing list.
(↑ Back to maillist attributes)
The name of the host handling email for the list.
(↑ Back to maillist attributes)
The admin password.
(↑ Back to maillist attributes)
The specific backend to use for this maillist
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
(↑ Back to maillist attributes)
The name of the host providing web archives and the administrative interface.
(↑ Back to maillist attributes)
/var/lib/mailman/mail/mailman
, list_lists
, newlist
, rmlist
.MCX object management using DirectoryService on OS X.
The default provider of this type merely manages the XML plist as
reported by the dscl -mcxexport
command. This is similar to the
content property of the file type in Puppet.
The recommended method of using this type is to use Work Group Manager
to manage users and groups on the local computer, record the resulting
puppet manifest using the command puppet resource mcx
, then deploy it
to other machines.
Autorequires: If Puppet is managing the user, group, or computer that these MCX settings refer to, the MCX resource will autorequire that user, group, or computer.
mcx { 'resource title':
name => # (namevar) The name of the resource being managed. The...
ensure => # Create or remove the MCX setting. Valid values...
content => # The XML Plist used as the value of MCXSettings...
ds_name => # The name to attach the MCX Setting to. (For...
ds_type => # The DirectoryService type this MCX setting...
provider => # The specific backend to use for this `mcx...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The name of the resource being managed. The default naming convention follows Directory Service paths:
/Computers/localhost
/Groups/admin
/Users/localadmin
The ds_type
and ds_name
type parameters are not necessary if the
default naming convention is followed.
(Property: This attribute represents concrete state on the target system.)
Create or remove the MCX setting.
Valid values are present
, absent
.
(Property: This attribute represents concrete state on the target system.)
The XML Plist used as the value of MCXSettings in DirectoryService. This is the standard output from the system command:
dscl localhost -mcxexport /Local/Default/<ds_type>/ds_name
Note that ds_type
is capitalized and plural in the dscl command.
Requires features manages_content.
The name to attach the MCX Setting to. (For example, localhost
when ds_type => computer
.) This setting is not required, as it can be
automatically discovered when the resource name is parseable. (For
example, in /Groups/admin
, group
will be used as the dstype.)
The DirectoryService type this MCX setting attaches to.
Valid values are user
, group
, computer
, computerlist
.
The specific backend to use for this mcx
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
MCX Settings management using DirectoryService on OS X.
This provider manages the entire MCXSettings attribute available to some directory services nodes. This management is ‘all or nothing’ in that discrete application domain key value pairs are not managed by this provider.
It is recommended to use WorkGroup Manager to configure Users, Groups, Computers, or ComputerLists, then use ‘ralsh mcx’ to generate a puppet manifest from the resulting configuration.
Original Author: Jeff McCune (mccune.jeff@gmail.com)
/usr/bin/dscl
.operatingsystem
== darwin
.manages_content
.Available features:
manages_content
— The provider can manage MCXSettings as a string.Provider support:
Provider | manages content |
---|---|
mcxcontent | X |
Manages mounted filesystems, including putting mount information into the mount table. The actual behavior depends on the value of the ‘ensure’ parameter.
Refresh: mount
resources can respond to refresh events (via
notify
, subscribe
, or the ~>
arrow). If a mount
receives an event
from another resource and its ensure
attribute is set to mounted
,
Puppet will try to unmount then remount that filesystem.
Autorequires: If Puppet is managing any parents of a mount resource — that is, other mount points higher up in the filesystem — the child mount will autorequire them.
Autobefores: If Puppet is managing any child file paths of a mount point, the mount resource will autobefore them.
mount { 'resource title':
name => # (namevar) The mount path for the...
ensure => # Control what to do with this mount. Set this...
atboot => # Whether to mount the mount at boot. Not all...
blockdevice => # The device to fsck. This is property is only...
device => # The device providing the mount. This can be...
dump => # Whether to dump the mount. Not all platform...
fstype => # The mount type. Valid values depend on the...
options => # A single string containing options for the...
pass => # The pass in which the mount is...
provider => # The specific backend to use for this `mount...
remounts => # Whether the mount can be remounted `mount -o...
target => # The file in which to store the mount table....
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The mount path for the mount.
(Property: This attribute represents concrete state on the target system.)
Control what to do with this mount. Set this attribute to
unmounted
to make sure the filesystem is in the filesystem table
but not mounted (if the filesystem is currently mounted, it will be
unmounted). Set it to absent
to unmount (if necessary) and remove
the filesystem from the fstab. Set to mounted
to add it to the
fstab and mount it. Set to present
to add to fstab but not change
mount/unmount status.
Valid values are defined
(also called present
), unmounted
, absent
, mounted
.
(Property: This attribute represents concrete state on the target system.)
Whether to mount the mount at boot. Not all platforms support this.
(Property: This attribute represents concrete state on the target system.)
The device to fsck. This is property is only valid on Solaris, and in most cases will default to the correct value.
(Property: This attribute represents concrete state on the target system.)
The device providing the mount. This can be whatever device is supporting by the mount, including network devices or devices specified by UUID rather than device path, depending on the operating system.
(Property: This attribute represents concrete state on the target system.)
Whether to dump the mount. Not all platform support this.
Valid values are 1
or 0
(or 2
on FreeBSD). Default is 0
.
Values can match /(0|1)/
.
(Property: This attribute represents concrete state on the target system.)
The mount type. Valid values depend on the operating system. This is a required option.
(Property: This attribute represents concrete state on the target system.)
A single string containing options for the mount, as they would appear in fstab. For many platforms this is a comma delimited string. Consult the fstab(5) man page for system-specific details.
(Property: This attribute represents concrete state on the target system.)
The pass in which the mount is checked.
The specific backend to use for this mount
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
Whether the mount can be remounted mount -o remount
. If
this is false, then the filesystem will be unmounted and remounted
manually, which is prone to failure.
Valid values are true
, false
.
(Property: This attribute represents concrete state on the target system.)
The file in which to store the mount table. Only used by those providers that write to disk.
mount
, umount
.refreshable
.Available features:
refreshable
— The provider can remount the filesystem.Provider support:
Provider | refreshable |
---|---|
parsed | X |
The Nagios type command. This resource type is autogenerated using the model developed in Naginator, and all of the Nagios types are generated using the same code and the same library.
This type generates Nagios configuration statements in Nagios-parseable configuration
files. By default, the statements will be added to /etc/nagios/nagios_command.cfg
, but
you can send them to a different file by setting their target
attribute.
You can purge Nagios resources using the resources
type, but only
in the default file locations. This is an architectural limitation.
nagios_command { 'resource title':
command_name => # (namevar) The name of this nagios_command...
ensure => # The basic property that the resource should be...
command_line => # Nagios configuration file...
group => # The desired group of the config file for this...
mode => # The desired mode of the config file for this...
owner => # The desired owner of the config file for this...
poller_tag => # Nagios configuration file...
provider => # The specific backend to use for this...
target => # The...
use => # Nagios configuration file...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The name of this nagios_command resource.
(↑ Back to nagios_command attributes)
(Property: This attribute represents concrete state on the target system.)
The basic property that the resource should be in.
Valid values are present
, absent
.
(↑ Back to nagios_command attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_command attributes)
The desired group of the config file for this nagios_command resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_command attributes)
The desired mode of the config file for this nagios_command resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_command attributes)
The desired owner of the config file for this nagios_command resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_command attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_command attributes)
The specific backend to use for this nagios_command
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
(↑ Back to nagios_command attributes)
(Property: This attribute represents concrete state on the target system.)
The target.
(↑ Back to nagios_command attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_command attributes)
The Nagios type contact. This resource type is autogenerated using the model developed in Naginator, and all of the Nagios types are generated using the same code and the same library.
This type generates Nagios configuration statements in Nagios-parseable configuration
files. By default, the statements will be added to /etc/nagios/nagios_contact.cfg
, but
you can send them to a different file by setting their target
attribute.
You can purge Nagios resources using the resources
type, but only
in the default file locations. This is an architectural limitation.
nagios_contact { 'resource title':
contact_name => # (namevar) The name of this nagios_contact...
ensure => # The basic property that the resource should be...
address1 => # Nagios configuration file...
address2 => # Nagios configuration file...
address3 => # Nagios configuration file...
address4 => # Nagios configuration file...
address5 => # Nagios configuration file...
address6 => # Nagios configuration file...
alias => # Nagios configuration file...
can_submit_commands => # Nagios configuration file...
contactgroups => # Nagios configuration file...
email => # Nagios configuration file...
group => # The desired group of the config file for this...
host_notification_commands => # Nagios configuration file...
host_notification_options => # Nagios configuration file...
host_notification_period => # Nagios configuration file...
host_notifications_enabled => # Nagios configuration file...
mode => # The desired mode of the config file for this...
owner => # The desired owner of the config file for this...
pager => # Nagios configuration file...
provider => # The specific backend to use for this...
register => # Nagios configuration file...
retain_nonstatus_information => # Nagios configuration file...
retain_status_information => # Nagios configuration file...
service_notification_commands => # Nagios configuration file...
service_notification_options => # Nagios configuration file...
service_notification_period => # Nagios configuration file...
service_notifications_enabled => # Nagios configuration file...
target => # The...
use => # Nagios configuration file...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The name of this nagios_contact resource.
(↑ Back to nagios_contact attributes)
(Property: This attribute represents concrete state on the target system.)
The basic property that the resource should be in.
Valid values are present
, absent
.
(↑ Back to nagios_contact attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_contact attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_contact attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_contact attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_contact attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_contact attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_contact attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_contact attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_contact attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_contact attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_contact attributes)
The desired group of the config file for this nagios_contact resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_contact attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_contact attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_contact attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_contact attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_contact attributes)
The desired mode of the config file for this nagios_contact resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_contact attributes)
The desired owner of the config file for this nagios_contact resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_contact attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_contact attributes)
The specific backend to use for this nagios_contact
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
(↑ Back to nagios_contact attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_contact attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_contact attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_contact attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_contact attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_contact attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_contact attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_contact attributes)
(Property: This attribute represents concrete state on the target system.)
The target.
(↑ Back to nagios_contact attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_contact attributes)
The Nagios type contactgroup. This resource type is autogenerated using the model developed in Naginator, and all of the Nagios types are generated using the same code and the same library.
This type generates Nagios configuration statements in Nagios-parseable configuration
files. By default, the statements will be added to /etc/nagios/nagios_contactgroup.cfg
, but
you can send them to a different file by setting their target
attribute.
You can purge Nagios resources using the resources
type, but only
in the default file locations. This is an architectural limitation.
nagios_contactgroup { 'resource title':
contactgroup_name => # (namevar) The name of this nagios_contactgroup...
ensure => # The basic property that the resource should be...
alias => # Nagios configuration file...
contactgroup_members => # Nagios configuration file...
group => # The desired group of the config file for this...
members => # Nagios configuration file...
mode => # The desired mode of the config file for this...
owner => # The desired owner of the config file for this...
provider => # The specific backend to use for this...
register => # Nagios configuration file...
target => # The...
use => # Nagios configuration file...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The name of this nagios_contactgroup resource.
(↑ Back to nagios_contactgroup attributes)
(Property: This attribute represents concrete state on the target system.)
The basic property that the resource should be in.
Valid values are present
, absent
.
(↑ Back to nagios_contactgroup attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_contactgroup attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_contactgroup attributes)
The desired group of the config file for this nagios_contactgroup resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_contactgroup attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_contactgroup attributes)
The desired mode of the config file for this nagios_contactgroup resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_contactgroup attributes)
The desired owner of the config file for this nagios_contactgroup resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_contactgroup attributes)
The specific backend to use for this nagios_contactgroup
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
(↑ Back to nagios_contactgroup attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_contactgroup attributes)
(Property: This attribute represents concrete state on the target system.)
The target.
(↑ Back to nagios_contactgroup attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_contactgroup attributes)
The Nagios type host. This resource type is autogenerated using the model developed in Naginator, and all of the Nagios types are generated using the same code and the same library.
This type generates Nagios configuration statements in Nagios-parseable configuration
files. By default, the statements will be added to /etc/nagios/nagios_host.cfg
, but
you can send them to a different file by setting their target
attribute.
You can purge Nagios resources using the resources
type, but only
in the default file locations. This is an architectural limitation.
nagios_host { 'resource title':
host_name => # (namevar) The name of this nagios_host...
ensure => # The basic property that the resource should be...
action_url => # Nagios configuration file...
active_checks_enabled => # Nagios configuration file...
address => # Nagios configuration file...
alias => # Nagios configuration file...
business_impact => # Nagios configuration file...
check_command => # Nagios configuration file...
check_freshness => # Nagios configuration file...
check_interval => # Nagios configuration file...
check_period => # Nagios configuration file...
contact_groups => # Nagios configuration file...
contacts => # Nagios configuration file...
display_name => # Nagios configuration file...
event_handler => # Nagios configuration file...
event_handler_enabled => # Nagios configuration file...
failure_prediction_enabled => # Nagios configuration file...
first_notification_delay => # Nagios configuration file...
flap_detection_enabled => # Nagios configuration file...
flap_detection_options => # Nagios configuration file...
freshness_threshold => # Nagios configuration file...
group => # The desired group of the config file for this...
high_flap_threshold => # Nagios configuration file...
hostgroups => # Nagios configuration file...
icon_image => # Nagios configuration file...
icon_image_alt => # Nagios configuration file...
initial_state => # Nagios configuration file...
low_flap_threshold => # Nagios configuration file...
max_check_attempts => # Nagios configuration file...
mode => # The desired mode of the config file for this...
notes => # Nagios configuration file...
notes_url => # Nagios configuration file...
notification_interval => # Nagios configuration file...
notification_options => # Nagios configuration file...
notification_period => # Nagios configuration file...
notifications_enabled => # Nagios configuration file...
obsess_over_host => # Nagios configuration file...
owner => # The desired owner of the config file for this...
parents => # Nagios configuration file...
passive_checks_enabled => # Nagios configuration file...
poller_tag => # Nagios configuration file...
process_perf_data => # Nagios configuration file...
provider => # The specific backend to use for this...
realm => # Nagios configuration file...
register => # Nagios configuration file...
retain_nonstatus_information => # Nagios configuration file...
retain_status_information => # Nagios configuration file...
retry_interval => # Nagios configuration file...
stalking_options => # Nagios configuration file...
statusmap_image => # Nagios configuration file...
target => # The...
use => # Nagios configuration file...
vrml_image => # Nagios configuration file...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The name of this nagios_host resource.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
The basic property that the resource should be in.
Valid values are present
, absent
.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
The desired group of the config file for this nagios_host resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
The desired mode of the config file for this nagios_host resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
The desired owner of the config file for this nagios_host resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
The specific backend to use for this nagios_host
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
The target.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_host attributes)
The Nagios type hostdependency. This resource type is autogenerated using the model developed in Naginator, and all of the Nagios types are generated using the same code and the same library.
This type generates Nagios configuration statements in Nagios-parseable configuration
files. By default, the statements will be added to /etc/nagios/nagios_hostdependency.cfg
, but
you can send them to a different file by setting their target
attribute.
You can purge Nagios resources using the resources
type, but only
in the default file locations. This is an architectural limitation.
nagios_hostdependency { 'resource title':
_naginator_name => # (namevar) The name of this nagios_hostdependency...
ensure => # The basic property that the resource should be...
dependency_period => # Nagios configuration file...
dependent_host_name => # Nagios configuration file...
dependent_hostgroup_name => # Nagios configuration file...
execution_failure_criteria => # Nagios configuration file...
group => # The desired group of the config file for this...
host_name => # Nagios configuration file...
hostgroup_name => # Nagios configuration file...
inherits_parent => # Nagios configuration file...
mode => # The desired mode of the config file for this...
notification_failure_criteria => # Nagios configuration file...
owner => # The desired owner of the config file for this...
provider => # The specific backend to use for this...
register => # Nagios configuration file...
target => # The...
use => # Nagios configuration file...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The name of this nagios_hostdependency resource.
(↑ Back to nagios_hostdependency attributes)
(Property: This attribute represents concrete state on the target system.)
The basic property that the resource should be in.
Valid values are present
, absent
.
(↑ Back to nagios_hostdependency attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostdependency attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostdependency attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostdependency attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostdependency attributes)
The desired group of the config file for this nagios_hostdependency resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_hostdependency attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostdependency attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostdependency attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostdependency attributes)
The desired mode of the config file for this nagios_hostdependency resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_hostdependency attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostdependency attributes)
The desired owner of the config file for this nagios_hostdependency resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_hostdependency attributes)
The specific backend to use for this nagios_hostdependency
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
(↑ Back to nagios_hostdependency attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostdependency attributes)
(Property: This attribute represents concrete state on the target system.)
The target.
(↑ Back to nagios_hostdependency attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostdependency attributes)
The Nagios type hostescalation. This resource type is autogenerated using the model developed in Naginator, and all of the Nagios types are generated using the same code and the same library.
This type generates Nagios configuration statements in Nagios-parseable configuration
files. By default, the statements will be added to /etc/nagios/nagios_hostescalation.cfg
, but
you can send them to a different file by setting their target
attribute.
You can purge Nagios resources using the resources
type, but only
in the default file locations. This is an architectural limitation.
nagios_hostescalation { 'resource title':
_naginator_name => # (namevar) The name of this nagios_hostescalation...
ensure => # The basic property that the resource should be...
contact_groups => # Nagios configuration file...
contacts => # Nagios configuration file...
escalation_options => # Nagios configuration file...
escalation_period => # Nagios configuration file...
first_notification => # Nagios configuration file...
group => # The desired group of the config file for this...
host_name => # Nagios configuration file...
hostgroup_name => # Nagios configuration file...
last_notification => # Nagios configuration file...
mode => # The desired mode of the config file for this...
notification_interval => # Nagios configuration file...
owner => # The desired owner of the config file for this...
provider => # The specific backend to use for this...
register => # Nagios configuration file...
target => # The...
use => # Nagios configuration file...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The name of this nagios_hostescalation resource.
(↑ Back to nagios_hostescalation attributes)
(Property: This attribute represents concrete state on the target system.)
The basic property that the resource should be in.
Valid values are present
, absent
.
(↑ Back to nagios_hostescalation attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostescalation attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostescalation attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostescalation attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostescalation attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostescalation attributes)
The desired group of the config file for this nagios_hostescalation resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_hostescalation attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostescalation attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostescalation attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostescalation attributes)
The desired mode of the config file for this nagios_hostescalation resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_hostescalation attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostescalation attributes)
The desired owner of the config file for this nagios_hostescalation resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_hostescalation attributes)
The specific backend to use for this nagios_hostescalation
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
(↑ Back to nagios_hostescalation attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostescalation attributes)
(Property: This attribute represents concrete state on the target system.)
The target.
(↑ Back to nagios_hostescalation attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostescalation attributes)
The Nagios type hostextinfo. This resource type is autogenerated using the model developed in Naginator, and all of the Nagios types are generated using the same code and the same library.
This type generates Nagios configuration statements in Nagios-parseable configuration
files. By default, the statements will be added to /etc/nagios/nagios_hostextinfo.cfg
, but
you can send them to a different file by setting their target
attribute.
You can purge Nagios resources using the resources
type, but only
in the default file locations. This is an architectural limitation.
nagios_hostextinfo { 'resource title':
host_name => # (namevar) The name of this nagios_hostextinfo...
ensure => # The basic property that the resource should be...
group => # The desired group of the config file for this...
icon_image => # Nagios configuration file...
icon_image_alt => # Nagios configuration file...
mode => # The desired mode of the config file for this...
notes => # Nagios configuration file...
notes_url => # Nagios configuration file...
owner => # The desired owner of the config file for this...
provider => # The specific backend to use for this...
register => # Nagios configuration file...
statusmap_image => # Nagios configuration file...
target => # The...
use => # Nagios configuration file...
vrml_image => # Nagios configuration file...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The name of this nagios_hostextinfo resource.
(↑ Back to nagios_hostextinfo attributes)
(Property: This attribute represents concrete state on the target system.)
The basic property that the resource should be in.
Valid values are present
, absent
.
(↑ Back to nagios_hostextinfo attributes)
The desired group of the config file for this nagios_hostextinfo resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_hostextinfo attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostextinfo attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostextinfo attributes)
The desired mode of the config file for this nagios_hostextinfo resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_hostextinfo attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostextinfo attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostextinfo attributes)
The desired owner of the config file for this nagios_hostextinfo resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_hostextinfo attributes)
The specific backend to use for this nagios_hostextinfo
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
(↑ Back to nagios_hostextinfo attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostextinfo attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostextinfo attributes)
(Property: This attribute represents concrete state on the target system.)
The target.
(↑ Back to nagios_hostextinfo attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostextinfo attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostextinfo attributes)
The Nagios type hostgroup. This resource type is autogenerated using the model developed in Naginator, and all of the Nagios types are generated using the same code and the same library.
This type generates Nagios configuration statements in Nagios-parseable configuration
files. By default, the statements will be added to /etc/nagios/nagios_hostgroup.cfg
, but
you can send them to a different file by setting their target
attribute.
You can purge Nagios resources using the resources
type, but only
in the default file locations. This is an architectural limitation.
nagios_hostgroup { 'resource title':
hostgroup_name => # (namevar) The name of this nagios_hostgroup...
ensure => # The basic property that the resource should be...
action_url => # Nagios configuration file...
alias => # Nagios configuration file...
group => # The desired group of the config file for this...
hostgroup_members => # Nagios configuration file...
members => # Nagios configuration file...
mode => # The desired mode of the config file for this...
notes => # Nagios configuration file...
notes_url => # Nagios configuration file...
owner => # The desired owner of the config file for this...
provider => # The specific backend to use for this...
realm => # Nagios configuration file...
register => # Nagios configuration file...
target => # The...
use => # Nagios configuration file...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The name of this nagios_hostgroup resource.
(↑ Back to nagios_hostgroup attributes)
(Property: This attribute represents concrete state on the target system.)
The basic property that the resource should be in.
Valid values are present
, absent
.
(↑ Back to nagios_hostgroup attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostgroup attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostgroup attributes)
The desired group of the config file for this nagios_hostgroup resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_hostgroup attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostgroup attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostgroup attributes)
The desired mode of the config file for this nagios_hostgroup resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_hostgroup attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostgroup attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostgroup attributes)
The desired owner of the config file for this nagios_hostgroup resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_hostgroup attributes)
The specific backend to use for this nagios_hostgroup
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
(↑ Back to nagios_hostgroup attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostgroup attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostgroup attributes)
(Property: This attribute represents concrete state on the target system.)
The target.
(↑ Back to nagios_hostgroup attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_hostgroup attributes)
The Nagios type service. This resource type is autogenerated using the model developed in Naginator, and all of the Nagios types are generated using the same code and the same library.
This type generates Nagios configuration statements in Nagios-parseable configuration
files. By default, the statements will be added to /etc/nagios/nagios_service.cfg
, but
you can send them to a different file by setting their target
attribute.
You can purge Nagios resources using the resources
type, but only
in the default file locations. This is an architectural limitation.
nagios_service { 'resource title':
_naginator_name => # (namevar) The name of this nagios_service...
ensure => # The basic property that the resource should be...
action_url => # Nagios configuration file...
active_checks_enabled => # Nagios configuration file...
business_impact => # Nagios configuration file...
check_command => # Nagios configuration file...
check_freshness => # Nagios configuration file...
check_interval => # Nagios configuration file...
check_period => # Nagios configuration file...
contact_groups => # Nagios configuration file...
contacts => # Nagios configuration file...
display_name => # Nagios configuration file...
event_handler => # Nagios configuration file...
event_handler_enabled => # Nagios configuration file...
failure_prediction_enabled => # Nagios configuration file...
first_notification_delay => # Nagios configuration file...
flap_detection_enabled => # Nagios configuration file...
flap_detection_options => # Nagios configuration file...
freshness_threshold => # Nagios configuration file...
group => # The desired group of the config file for this...
high_flap_threshold => # Nagios configuration file...
host_name => # Nagios configuration file...
hostgroup_name => # Nagios configuration file...
icon_image => # Nagios configuration file...
icon_image_alt => # Nagios configuration file...
initial_state => # Nagios configuration file...
is_volatile => # Nagios configuration file...
low_flap_threshold => # Nagios configuration file...
max_check_attempts => # Nagios configuration file...
mode => # The desired mode of the config file for this...
normal_check_interval => # Nagios configuration file...
notes => # Nagios configuration file...
notes_url => # Nagios configuration file...
notification_interval => # Nagios configuration file...
notification_options => # Nagios configuration file...
notification_period => # Nagios configuration file...
notifications_enabled => # Nagios configuration file...
obsess_over_service => # Nagios configuration file...
owner => # The desired owner of the config file for this...
parallelize_check => # Nagios configuration file...
passive_checks_enabled => # Nagios configuration file...
poller_tag => # Nagios configuration file...
process_perf_data => # Nagios configuration file...
provider => # The specific backend to use for this...
register => # Nagios configuration file...
retain_nonstatus_information => # Nagios configuration file...
retain_status_information => # Nagios configuration file...
retry_check_interval => # Nagios configuration file...
retry_interval => # Nagios configuration file...
service_description => # Nagios configuration file...
servicegroups => # Nagios configuration file...
stalking_options => # Nagios configuration file...
target => # The...
use => # Nagios configuration file...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The name of this nagios_service resource.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
The basic property that the resource should be in.
Valid values are present
, absent
.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
The desired group of the config file for this nagios_service resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
The desired mode of the config file for this nagios_service resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
The desired owner of the config file for this nagios_service resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
The specific backend to use for this nagios_service
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
The target.
(↑ Back to nagios_service attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_service attributes)
The Nagios type servicedependency. This resource type is autogenerated using the model developed in Naginator, and all of the Nagios types are generated using the same code and the same library.
This type generates Nagios configuration statements in Nagios-parseable configuration
files. By default, the statements will be added to /etc/nagios/nagios_servicedependency.cfg
, but
you can send them to a different file by setting their target
attribute.
You can purge Nagios resources using the resources
type, but only
in the default file locations. This is an architectural limitation.
nagios_servicedependency { 'resource title':
_naginator_name => # (namevar) The name of this nagios_servicedependency...
ensure => # The basic property that the resource should be...
dependency_period => # Nagios configuration file...
dependent_host_name => # Nagios configuration file...
dependent_hostgroup_name => # Nagios configuration file...
dependent_service_description => # Nagios configuration file...
execution_failure_criteria => # Nagios configuration file...
group => # The desired group of the config file for this...
host_name => # Nagios configuration file...
hostgroup_name => # Nagios configuration file...
inherits_parent => # Nagios configuration file...
mode => # The desired mode of the config file for this...
notification_failure_criteria => # Nagios configuration file...
owner => # The desired owner of the config file for this...
provider => # The specific backend to use for this...
register => # Nagios configuration file...
service_description => # Nagios configuration file...
target => # The...
use => # Nagios configuration file...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The name of this nagios_servicedependency resource.
(↑ Back to nagios_servicedependency attributes)
(Property: This attribute represents concrete state on the target system.)
The basic property that the resource should be in.
Valid values are present
, absent
.
(↑ Back to nagios_servicedependency attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_servicedependency attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_servicedependency attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_servicedependency attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_servicedependency attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_servicedependency attributes)
The desired group of the config file for this nagios_servicedependency resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_servicedependency attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_servicedependency attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_servicedependency attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_servicedependency attributes)
The desired mode of the config file for this nagios_servicedependency resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_servicedependency attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_servicedependency attributes)
The desired owner of the config file for this nagios_servicedependency resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_servicedependency attributes)
The specific backend to use for this nagios_servicedependency
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
(↑ Back to nagios_servicedependency attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_servicedependency attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_servicedependency attributes)
(Property: This attribute represents concrete state on the target system.)
The target.
(↑ Back to nagios_servicedependency attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_servicedependency attributes)
The Nagios type serviceescalation. This resource type is autogenerated using the model developed in Naginator, and all of the Nagios types are generated using the same code and the same library.
This type generates Nagios configuration statements in Nagios-parseable configuration
files. By default, the statements will be added to /etc/nagios/nagios_serviceescalation.cfg
, but
you can send them to a different file by setting their target
attribute.
You can purge Nagios resources using the resources
type, but only
in the default file locations. This is an architectural limitation.
nagios_serviceescalation { 'resource title':
_naginator_name => # (namevar) The name of this nagios_serviceescalation...
ensure => # The basic property that the resource should be...
contact_groups => # Nagios configuration file...
contacts => # Nagios configuration file...
escalation_options => # Nagios configuration file...
escalation_period => # Nagios configuration file...
first_notification => # Nagios configuration file...
group => # The desired group of the config file for this...
host_name => # Nagios configuration file...
hostgroup_name => # Nagios configuration file...
last_notification => # Nagios configuration file...
mode => # The desired mode of the config file for this...
notification_interval => # Nagios configuration file...
owner => # The desired owner of the config file for this...
provider => # The specific backend to use for this...
register => # Nagios configuration file...
service_description => # Nagios configuration file...
servicegroup_name => # Nagios configuration file...
target => # The...
use => # Nagios configuration file...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The name of this nagios_serviceescalation resource.
(↑ Back to nagios_serviceescalation attributes)
(Property: This attribute represents concrete state on the target system.)
The basic property that the resource should be in.
Valid values are present
, absent
.
(↑ Back to nagios_serviceescalation attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_serviceescalation attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_serviceescalation attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_serviceescalation attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_serviceescalation attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_serviceescalation attributes)
The desired group of the config file for this nagios_serviceescalation resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_serviceescalation attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_serviceescalation attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_serviceescalation attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_serviceescalation attributes)
The desired mode of the config file for this nagios_serviceescalation resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_serviceescalation attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_serviceescalation attributes)
The desired owner of the config file for this nagios_serviceescalation resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_serviceescalation attributes)
The specific backend to use for this nagios_serviceescalation
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
(↑ Back to nagios_serviceescalation attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_serviceescalation attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_serviceescalation attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_serviceescalation attributes)
(Property: This attribute represents concrete state on the target system.)
The target.
(↑ Back to nagios_serviceescalation attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_serviceescalation attributes)
The Nagios type serviceextinfo. This resource type is autogenerated using the model developed in Naginator, and all of the Nagios types are generated using the same code and the same library.
This type generates Nagios configuration statements in Nagios-parseable configuration
files. By default, the statements will be added to /etc/nagios/nagios_serviceextinfo.cfg
, but
you can send them to a different file by setting their target
attribute.
You can purge Nagios resources using the resources
type, but only
in the default file locations. This is an architectural limitation.
nagios_serviceextinfo { 'resource title':
_naginator_name => # (namevar) The name of this nagios_serviceextinfo...
ensure => # The basic property that the resource should be...
action_url => # Nagios configuration file...
group => # The desired group of the config file for this...
host_name => # Nagios configuration file...
icon_image => # Nagios configuration file...
icon_image_alt => # Nagios configuration file...
mode => # The desired mode of the config file for this...
notes => # Nagios configuration file...
notes_url => # Nagios configuration file...
owner => # The desired owner of the config file for this...
provider => # The specific backend to use for this...
register => # Nagios configuration file...
service_description => # Nagios configuration file...
target => # The...
use => # Nagios configuration file...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The name of this nagios_serviceextinfo resource.
(↑ Back to nagios_serviceextinfo attributes)
(Property: This attribute represents concrete state on the target system.)
The basic property that the resource should be in.
Valid values are present
, absent
.
(↑ Back to nagios_serviceextinfo attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_serviceextinfo attributes)
The desired group of the config file for this nagios_serviceextinfo resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_serviceextinfo attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_serviceextinfo attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_serviceextinfo attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_serviceextinfo attributes)
The desired mode of the config file for this nagios_serviceextinfo resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_serviceextinfo attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_serviceextinfo attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_serviceextinfo attributes)
The desired owner of the config file for this nagios_serviceextinfo resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_serviceextinfo attributes)
The specific backend to use for this nagios_serviceextinfo
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
(↑ Back to nagios_serviceextinfo attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_serviceextinfo attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_serviceextinfo attributes)
(Property: This attribute represents concrete state on the target system.)
The target.
(↑ Back to nagios_serviceextinfo attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_serviceextinfo attributes)
The Nagios type servicegroup. This resource type is autogenerated using the model developed in Naginator, and all of the Nagios types are generated using the same code and the same library.
This type generates Nagios configuration statements in Nagios-parseable configuration
files. By default, the statements will be added to /etc/nagios/nagios_servicegroup.cfg
, but
you can send them to a different file by setting their target
attribute.
You can purge Nagios resources using the resources
type, but only
in the default file locations. This is an architectural limitation.
nagios_servicegroup { 'resource title':
servicegroup_name => # (namevar) The name of this nagios_servicegroup...
ensure => # The basic property that the resource should be...
action_url => # Nagios configuration file...
alias => # Nagios configuration file...
group => # The desired group of the config file for this...
members => # Nagios configuration file...
mode => # The desired mode of the config file for this...
notes => # Nagios configuration file...
notes_url => # Nagios configuration file...
owner => # The desired owner of the config file for this...
provider => # The specific backend to use for this...
register => # Nagios configuration file...
servicegroup_members => # Nagios configuration file...
target => # The...
use => # Nagios configuration file...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The name of this nagios_servicegroup resource.
(↑ Back to nagios_servicegroup attributes)
(Property: This attribute represents concrete state on the target system.)
The basic property that the resource should be in.
Valid values are present
, absent
.
(↑ Back to nagios_servicegroup attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_servicegroup attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_servicegroup attributes)
The desired group of the config file for this nagios_servicegroup resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_servicegroup attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_servicegroup attributes)
The desired mode of the config file for this nagios_servicegroup resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_servicegroup attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_servicegroup attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_servicegroup attributes)
The desired owner of the config file for this nagios_servicegroup resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_servicegroup attributes)
The specific backend to use for this nagios_servicegroup
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
(↑ Back to nagios_servicegroup attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_servicegroup attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_servicegroup attributes)
(Property: This attribute represents concrete state on the target system.)
The target.
(↑ Back to nagios_servicegroup attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_servicegroup attributes)
The Nagios type timeperiod. This resource type is autogenerated using the model developed in Naginator, and all of the Nagios types are generated using the same code and the same library.
This type generates Nagios configuration statements in Nagios-parseable configuration
files. By default, the statements will be added to /etc/nagios/nagios_timeperiod.cfg
, but
you can send them to a different file by setting their target
attribute.
You can purge Nagios resources using the resources
type, but only
in the default file locations. This is an architectural limitation.
nagios_timeperiod { 'resource title':
timeperiod_name => # (namevar) The name of this nagios_timeperiod...
ensure => # The basic property that the resource should be...
alias => # Nagios configuration file...
exclude => # Nagios configuration file...
friday => # Nagios configuration file...
group => # The desired group of the config file for this...
mode => # The desired mode of the config file for this...
monday => # Nagios configuration file...
owner => # The desired owner of the config file for this...
provider => # The specific backend to use for this...
register => # Nagios configuration file...
saturday => # Nagios configuration file...
sunday => # Nagios configuration file...
target => # The...
thursday => # Nagios configuration file...
tuesday => # Nagios configuration file...
use => # Nagios configuration file...
wednesday => # Nagios configuration file...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The name of this nagios_timeperiod resource.
(↑ Back to nagios_timeperiod attributes)
(Property: This attribute represents concrete state on the target system.)
The basic property that the resource should be in.
Valid values are present
, absent
.
(↑ Back to nagios_timeperiod attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_timeperiod attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_timeperiod attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_timeperiod attributes)
The desired group of the config file for this nagios_timeperiod resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_timeperiod attributes)
The desired mode of the config file for this nagios_timeperiod resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_timeperiod attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_timeperiod attributes)
The desired owner of the config file for this nagios_timeperiod resource.
NOTE: If the target file is explicitly managed by a file resource in your manifest, this parameter has no effect. If a parent directory of the target is managed by a recursive file resource, this limitation does not apply (i.e., this parameter takes precedence, and if purge is used, the target file is exempt).
(↑ Back to nagios_timeperiod attributes)
The specific backend to use for this nagios_timeperiod
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
(↑ Back to nagios_timeperiod attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_timeperiod attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_timeperiod attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_timeperiod attributes)
(Property: This attribute represents concrete state on the target system.)
The target.
(↑ Back to nagios_timeperiod attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_timeperiod attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_timeperiod attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_timeperiod attributes)
(Property: This attribute represents concrete state on the target system.)
Nagios configuration file parameter.
(↑ Back to nagios_timeperiod attributes)
Sends an arbitrary message to the agent run-time log.
notify { 'resource title':
name => # (namevar) An arbitrary tag for your own reference; the...
message => # The message to be sent to the...
withpath => # Whether to show the full object path. Defaults...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
An arbitrary tag for your own reference; the name of the message.
(Property: This attribute represents concrete state on the target system.)
The message to be sent to the log.
Whether to show the full object path. Defaults to false.
Valid values are true
, false
.
Manage packages. There is a basic dichotomy in package
support right now: Some package types (e.g., yum and apt) can
retrieve their own package files, while others (e.g., rpm and sun)
cannot. For those package formats that cannot retrieve their own files,
you can use the source
parameter to point to the correct file.
Puppet will automatically guess the packaging format that you are
using based on the platform you are on, but you can override it
using the provider
parameter; each provider defines what it
requires in order to function, and you must meet those requirements
to use a given provider.
You can declare multiple package resources with the same name
, as long
as they specify different providers and have unique titles.
Note that you must use the title to make a reference to a package
resource; Package[<NAME>]
is not a synonym for Package[<TITLE>]
like
it is for many other resource types.
Autorequires: If Puppet is managing the files specified as a
package’s adminfile
, responsefile
, or source
, the package
resource will autorequire those files.
package { 'resource title':
name => # (namevar) The package name. This is the name that the...
provider => # (namevar) The specific backend to use for this `package...
ensure => # What state the package should be in. On...
adminfile => # A file containing package defaults for...
allow_virtual => # Specifies if virtual package names are allowed...
allowcdrom => # Tells apt to allow cdrom sources in the...
category => # A read-only parameter set by the...
configfiles => # Whether to keep or replace modified config files
description => # A read-only parameter set by the...
flavor => # OpenBSD supports 'flavors', which are further...
install_options => # An array of additional options to pass when...
instance => # A read-only parameter set by the...
package_settings => # Settings that can change the contents or...
platform => # A read-only parameter set by the...
reinstall_on_refresh => # Whether this resource should respond to refresh...
responsefile => # A file containing any necessary answers to...
root => # A read-only parameter set by the...
source => # Where to find the package file. This is only...
status => # A read-only parameter set by the...
uninstall_options => # An array of additional options to pass when...
vendor => # A read-only parameter set by the...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The package name. This is the name that the packaging system uses internally, which is sometimes (especially on Solaris) a name that is basically useless to humans. If a package goes by several names, you can use a single title and then set the name conditionally:
# In the 'openssl' class
$ssl = $operatingsystem ? {
solaris => SMCossl,
default => openssl
}
package { 'openssl':
ensure => installed,
name => $ssl,
}
. etc. .
$ssh = $operatingsystem ? {
solaris => SMCossh,
default => openssh
}
package { 'openssh':
ensure => installed,
name => $ssh,
require => Package['openssl'],
}
(↑ Back to package attributes)
(Secondary namevar: This resource type allows you to manage multiple resources with the same name as long as their providers are different.)
The specific backend to use for this package
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
aix
appdmg
apple
apt
aptitude
aptrpm
blastwave
dnf
dpkg
fink
freebsd
gem
hpux
macports
nim
openbsd
opkg
pacman
pip3
pip
pkg
pkgdmg
pkgin
pkgng
pkgutil
portage
ports
portupgrade
puppet_gem
rpm
rug
sun
sunfreeware
tdnf
up2date
urpmi
windows
yum
zypper
(↑ Back to package attributes)
(Property: This attribute represents concrete state on the target system.)
What state the package should be in. On packaging systems that can
retrieve new packages on their own, you can choose which package to
retrieve by specifying a version number or latest
as the ensure
value. On packaging systems that manage configuration files separately
from “normal” system files, you can uninstall config files by
specifying purged
as the ensure value. This defaults to installed
.
Version numbers must match the full version to install, including
release if the provider uses a release moniker. Ranges or semver
patterns are not accepted except for the gem
package provider. For
example, to install the bash package from the rpm
bash-4.1.2-29.el6.x86_64.rpm
, use the string '4.1.2-29.el6'
.
Valid values are present
(also called installed
), absent
, purged
, held
, latest
. Values can match /./
.
(↑ Back to package attributes)
A file containing package defaults for installing packages.
This attribute is only used on Solaris. Its value should be a path to a
local file stored on the target system. Solaris’s package tools expect
either an absolute file path or a relative path to a file in
/var/sadm/install/admin
.
The value of adminfile
will be passed directly to the pkgadd
or
pkgrm
command with the -a <ADMINFILE>
option.
(↑ Back to package attributes)
Specifies if virtual package names are allowed for install and uninstall.
Valid values are true
, false
, yes
, no
.
Requires features virtual_packages.
(↑ Back to package attributes)
Tells apt to allow cdrom sources in the sources.list file. Normally apt will bail if you try this.
Valid values are true
, false
.
(↑ Back to package attributes)
A read-only parameter set by the package.
(↑ Back to package attributes)
Whether to keep or replace modified config files when installing or
upgrading a package. This only affects the apt
and dpkg
providers.
Defaults to keep
.
Valid values are keep
, replace
.
(↑ Back to package attributes)
A read-only parameter set by the package.
(↑ Back to package attributes)
OpenBSD supports ‘flavors’, which are further specifications for which type of package you want.
(↑ Back to package attributes)
An array of additional options to pass when installing a package. These
options are package-specific, and should be documented by the software
vendor. One commonly implemented option is INSTALLDIR
:
package { 'mysql':
ensure => installed,
source => 'N:/packages/mysql-5.5.16-winx64.msi',
install_options => [ '/S', { 'INSTALLDIR' => 'C:\mysql-5.5' } ],
}
Each option in the array can either be a string or a hash, where each key and value pair are interpreted in a provider specific way. Each option will automatically be quoted when passed to the install command.
With Windows packages, note that file paths in an install option must
use backslashes. (Since install options are passed directly to the
installation command, forward slashes won’t be automatically converted
like they are in file
resources.) Note also that backslashes in
double-quoted strings must be escaped and backslashes in single-quoted
strings can be escaped.
Requires features install_options.
(↑ Back to package attributes)
A read-only parameter set by the package.
(↑ Back to package attributes)
(Property: This attribute represents concrete state on the target system.)
Settings that can change the contents or configuration of a package.
The formatting and effects of package_settings are provider-specific; any provider that implements them must explain how to use them in its documentation. (Our general expectation is that if a package is installed but its settings are out of sync, the provider should re-install that package with the desired settings.)
An example of how package_settings could be used is FreeBSD’s port build options — a future version of the provider could accept a hash of options, and would reinstall the port if the installed version lacked the correct settings.
package { 'www/apache22':
package_settings => { 'SUEXEC' => false }
}
Again, check the documentation of your platform’s package provider to see the actual usage.
Requires features package_settings.
(↑ Back to package attributes)
A read-only parameter set by the package.
(↑ Back to package attributes)
Whether this resource should respond to refresh events (via subscribe
,
notify
, or the ~>
arrow) by reinstalling the package. Only works for
providers that support the reinstallable
feature.
This is useful for source-based distributions, where you may want to recompile a package if the build options change.
If you use this, be careful of notifying classes when you want to restart services. If the class also contains a refreshable package, doing so could cause unnecessary re-installs.
Defaults to false
.
Valid values are true
, false
.
(↑ Back to package attributes)
A file containing any necessary answers to questions asked by the package. This is currently used on Solaris and Debian. The value will be validated according to system rules, but it should generally be a fully qualified path.
(↑ Back to package attributes)
A read-only parameter set by the package.
(↑ Back to package attributes)
Where to find the package file. This is only used by providers that don’t
automatically download packages from a central repository. (For example:
the yum
and apt
providers ignore this attribute, but the rpm
and
dpkg
providers require it.)
Different providers accept different values for source
. Most providers
accept paths to local files stored on the target system. Some providers
may also accept URLs or network drive paths. Puppet will not
automatically retrieve source files for you, and usually just passes the
value of source
to the package installation command.
You can use a file
resource if you need to manually copy package files
to the target system.
(↑ Back to package attributes)
A read-only parameter set by the package.
(↑ Back to package attributes)
An array of additional options to pass when uninstalling a package. These options are package-specific, and should be documented by the software vendor. For example:
package { 'VMware Tools':
ensure => absent,
uninstall_options => [ { 'REMOVE' => 'Sync,VSS' } ],
}
Each option in the array can either be a string or a hash, where each key and value pair are interpreted in a provider specific way. Each option will automatically be quoted when passed to the uninstall command.
On Windows, this is the only place in Puppet where backslash separators should be used. Note that backslashes in double-quoted strings must be double-escaped and backslashes in single-quoted strings may be double-escaped.
Requires features uninstall_options.
(↑ Back to package attributes)
A read-only parameter set by the package.
(↑ Back to package attributes)
Installation from an AIX software directory, using the AIX installp
command. The source
parameter is required for this provider, and should
be set to the absolute path (on the puppet agent machine) of a directory
containing one or more BFF package files.
The installp
command will generate a table of contents file (named .toc
)
in this directory, and the name
parameter (or resource title) that you
specify for your package
resource must match a package name that exists
in the .toc
file.
Note that package downgrades are not supported; if your resource specifies a specific version number and there is already a newer version of the package installed on the machine, the resource will fail with an error message.
/usr/bin/lslpp
, /usr/sbin/installp
.operatingsystem
== aix
.installable
, uninstallable
, upgradeable
, versionable
.Package management which copies application bundles to a target.
/usr/bin/curl
, /usr/bin/ditto
, /usr/bin/hdiutil
.installable
.Package management based on OS X’s built-in packaging system. This is
essentially the simplest and least functional package system in existence –
it only supports installation; no deletion or upgrades. The provider will
automatically add the .pkg
extension, so leave that off when specifying
the package name.
/usr/sbin/installer
.installable
.Package management via apt-get
.
This provider supports the install_options
attribute, which allows command-line flags to be passed to apt-get.
These options should be specified as a string (e.g. ‘–flag’), a hash (e.g. {‘–flag’ => ‘value’}),
or an array where each element is either a string or a hash.
/usr/bin/apt-cache
, /usr/bin/apt-get
, /usr/bin/debconf-set-selections
.osfamily
== debian
.holdable
, install_options
, installable
, purgeable
, uninstallable
, upgradeable
, versionable
.Package management via aptitude
.
/usr/bin/apt-cache
, /usr/bin/aptitude
.holdable
, installable
, purgeable
, uninstallable
, upgradeable
, versionable
.Package management via apt-get
ported to rpm
.
apt-cache
, apt-get
, rpm
.installable
, purgeable
, uninstallable
, upgradeable
, versionable
.Package management using Blastwave.org’s pkg-get
command on Solaris.
pkg-get
.installable
, uninstallable
, upgradeable
.Support via dnf
.
Using this provider’s uninstallable
feature will not remove dependent packages. To
remove dependent packages with this provider use the purgeable
feature, but note this
feature is destructive and should be used with the utmost care.
This provider supports the install_options
attribute, which allows command-line flags to be passed to dnf.
These options should be specified as a string (e.g. ‘–flag’), a hash (e.g. {‘–flag’ => ‘value’}),
or an array where each element is either a string or a hash.
dnf
, rpm
.operatingsystem
== fedora
and operatingsystemmajrelease
== 22, 23, 24, 25
.install_options
, installable
, purgeable
, uninstallable
, upgradeable
, versionable
, virtual_packages
.Package management via dpkg
. Because this only uses dpkg
and not apt
, you must specify the source of any packages you want
to manage.
/usr/bin/dpkg-deb
, /usr/bin/dpkg-query
, /usr/bin/dpkg
.holdable
, installable
, purgeable
, uninstallable
, upgradeable
.Package management via fink
.
/sw/bin/apt-cache
, /sw/bin/apt-get
, /sw/bin/dpkg-query
, /sw/bin/fink
.holdable
, installable
, purgeable
, uninstallable
, upgradeable
, versionable
.The specific form of package management on FreeBSD. This is an extremely quirky packaging system, in that it freely mixes between ports and packages. Apparently all of the tools are written in Ruby, so there are plans to rewrite this support to directly use those libraries.
/usr/sbin/pkg_add
, /usr/sbin/pkg_delete
, /usr/sbin/pkg_info
.installable
, purgeable
, uninstallable
, upgradeable
.Ruby Gem support. If a URL is passed via source
, then that URL is used as the
remote gem repository; if a source is present but is not a valid URL, it will be
interpreted as the path to a local gem file. If source is not present at all,
the gem will be installed from the default gem repositories.
This provider supports the install_options
and uninstall_options
attributes,
which allow command-line flags to be passed to the gem command.
These options should be specified as a string (e.g. ‘–flag’), a hash (e.g. {‘–flag’ => ‘value’}),
or an array where each element is either a string or a hash.
gem
.install_options
, installable
, uninstall_options
, uninstallable
, upgradeable
, versionable
.HP-UX’s packaging system.
/usr/sbin/swinstall
, /usr/sbin/swlist
, /usr/sbin/swremove
.operatingsystem
== hp-ux
.installable
, uninstallable
.Package management using MacPorts on OS X.
Supports MacPorts versions and revisions, but not variants. Variant preferences may be specified using the MacPorts variants.conf file.
When specifying a version in the Puppet DSL, only specify the version, not the revision. Revisions are only used internally for ensuring the latest version/revision of a port.
/opt/local/bin/port
.installable
, uninstallable
, upgradeable
, versionable
.Installation from an AIX NIM LPP source. The source
parameter is required
for this provider, and should specify the name of a NIM lpp_source
resource
that is visible to the puppet agent machine. This provider supports the
management of both BFF/installp and RPM packages.
Note that package downgrades are not supported; if your resource specifies a specific version number and there is already a newer version of the package installed on the machine, the resource will fail with an error message.
/usr/bin/lslpp
, /usr/sbin/nimclient
, rpm
.installable
, uninstallable
, upgradeable
, versionable
.OpenBSD’s form of pkg_add
support.
This provider supports the install_options
and uninstall_options
attributes, which allow command-line flags to be passed to pkg_add and pkg_delete.
These options should be specified as a string (e.g. ‘–flag’), a hash (e.g. {‘–flag’ => ‘value’}),
or an array where each element is either a string or a hash.
pkg_add
, pkg_delete
, pkg_info
.operatingsystem
== openbsd
.install_options
, installable
, purgeable
, uninstall_options
, uninstallable
, upgradeable
, versionable
.Opkg packaging support. Common on OpenWrt and OpenEmbedded platforms
opkg
.operatingsystem
== openwrt
.installable
, uninstallable
, upgradeable
.Support for the Package Manager Utility (pacman) used in Archlinux.
This provider supports the install_options
attribute, which allows command-line flags to be passed to pacman.
These options should be specified as a string (e.g. ‘–flag’), a hash (e.g. {‘–flag’ => ‘value’}),
or an array where each element is either a string or a hash.
/usr/bin/pacman
.operatingsystem
== archlinux, manjarolinux
.install_options
, installable
, uninstall_options
, uninstallable
, upgradeable
, virtual_packages
.Python packages via pip
.
This provider supports the install_options
attribute, which allows command-line flags to be passed to pip.
These options should be specified as a string (e.g. ‘–flag’), a hash (e.g. {‘–flag’ => ‘value’}),
or an array where each element is either a string or a hash.
install_options
, installable
, uninstallable
, upgradeable
, versionable
.Python packages via pip3
.
This provider supports the install_options
attribute, which allows command-line flags to be passed to pip3.
These options should be specified as a string (e.g. ‘–flag’), a hash (e.g. {‘–flag’ => ‘value’}),
or an array where each element is either a string or a hash.
install_options
, installable
, uninstallable
, upgradeable
, versionable
.OpenSolaris image packaging system. See pkg(5) for more information.
/usr/bin/pkg
.kernelrelease
== 5.11, 5.12
and osfamily
== solaris
.holdable
, installable
, uninstallable
, upgradeable
, versionable
.Package management based on Apple’s Installer.app and DiskUtility.app.
This provider works by checking the contents of a DMG image for Apple pkg or mpkg files. Any number of pkg or mpkg files may exist in the root directory of the DMG file system, and Puppet will install all of them. Subdirectories are not checked for packages.
This provider can also accept plain .pkg (but not .mpkg) files in addition to .dmg files.
Notes:
source
attribute is mandatory. It must be either a local disk path
or an HTTP, HTTPS, or FTP URL to the package.name
of the resource must be the filename (without path) of the DMG file./var/db/.puppet_pkgdmg_installed_NAME
. If that file is present,
Puppet assumes all packages from that DMG are already installed.This provider is not versionable and uses DMG filenames to determine whether a package has been installed. Thus, to install new a version of a package, you must create a new DMG with a different filename.
/usr/bin/curl
, /usr/bin/hdiutil
, /usr/sbin/installer
.operatingsystem
== darwin
.installable
.Package management using pkgin, a binary package manager for pkgsrc.
pkgin
.operatingsystem
== dragonfly, smartos, netbsd
.installable
, uninstallable
, upgradeable
, versionable
.A PkgNG provider for FreeBSD and DragonFly.
/usr/local/sbin/pkg
.operatingsystem
== freebsd
.installable
, uninstallable
, upgradeable
, versionable
.Package management using Peter Bonivart’s pkgutil
command on Solaris.
pkgutil
.installable
, uninstallable
, upgradeable
.Provides packaging support for Gentoo’s portage system.
/usr/bin/eix-update
, /usr/bin/eix
, /usr/bin/emerge
.operatingsystem
== gentoo
.installable
, reinstallable
, uninstallable
, upgradeable
, versionable
.Support for FreeBSD’s ports. Note that this, too, mixes packages and ports.
/usr/local/sbin/pkg_deinstall
, /usr/local/sbin/portupgrade
, /usr/local/sbin/portversion
, /usr/sbin/pkg_info
.installable
, purgeable
, uninstallable
, upgradeable
.Support for FreeBSD’s ports using the portupgrade ports management software. Use the port’s full origin as the resource name. eg (ports-mgmt/portupgrade) for the portupgrade port.
/usr/local/sbin/pkg_deinstall
, /usr/local/sbin/portinstall
, /usr/local/sbin/portupgrade
, /usr/local/sbin/portversion
, /usr/sbin/pkg_info
.installable
, uninstallable
, upgradeable
.Puppet Ruby Gem support. This provider is useful for managing gems needed by the ruby provided in the puppet-agent package.
/opt/puppetlabs/puppet/bin/gem
.install_options
, installable
, uninstall_options
, uninstallable
, upgradeable
, versionable
.RPM packaging support; should work anywhere with a working rpm
binary.
This provider supports the install_options
and uninstall_options
attributes, which allow command-line flags to be passed to rpm.
These options should be specified as a string (e.g. ‘–flag’), a hash (e.g. {‘–flag’ => ‘value’}),
or an array where each element is either a string or a hash.
rpm
.install_options
, installable
, uninstall_options
, uninstallable
, upgradeable
, versionable
, virtual_packages
.Support for suse rug
package manager.
/usr/bin/rug
, rpm
.installable
, uninstallable
, upgradeable
, versionable
.Sun’s packaging system. Requires that you specify the source for the packages you’re managing.
This provider supports the install_options
attribute, which allows command-line flags to be passed to pkgadd.
These options should be specified as a string (e.g. ‘–flag’), a hash (e.g. {‘–flag’ => ‘value’}),
or an array where each element is either a string or a hash.
/usr/bin/pkginfo
, /usr/sbin/pkgadd
, /usr/sbin/pkgrm
.osfamily
== solaris
.install_options
, installable
, uninstallable
, upgradeable
.Package management using sunfreeware.com’s pkg-get
command on Solaris.
At this point, support is exactly the same as blastwave
support and
has not actually been tested.
pkg-get
.installable
, uninstallable
, upgradeable
.Support via tdnf
.
This provider supports the install_options
attribute, which allows command-line flags to be passed to tdnf.
These options should be spcified as a string (e.g. ‘–flag’), a hash (e.g. {‘–flag’ => ‘value’}), or an
array where each element is either a string or a hash.
rpm
, tdnf
.operatingsystem
== PhotonOS
.install_options
, installable
, purgeable
, uninstallable
, upgradeable
, versionable
, virtual_packages
.Support for Red Hat’s proprietary up2date
package update
mechanism.
/usr/sbin/up2date-nox
.lsbdistrelease
== 2.1, 3, 4
and osfamily
== redhat
.installable
, uninstallable
, upgradeable
.Support via urpmi
.
rpm
, urpme
, urpmi
, urpmq
.operatingsystem
== mandriva, mandrake
.installable
, purgeable
, uninstallable
, upgradeable
, versionable
.Windows package management.
This provider supports either MSI or self-extracting executable installers.
This provider requires a source
attribute when installing the package.
It accepts paths to local files, mapped drives, or UNC paths.
This provider supports the install_options
and uninstall_options
attributes, which allow command-line flags to be passed to the installer.
These options should be specified as a string (e.g. ‘–flag’), a hash (e.g. {‘–flag’ => ‘value’}),
or an array where each element is either a string or a hash.
If the executable requires special arguments to perform a silent install or
uninstall, then the appropriate arguments should be specified using the
install_options
or uninstall_options
attributes, respectively. Puppet
will automatically quote any option that contains spaces.
operatingsystem
== windows
.install_options
, installable
, uninstall_options
, uninstallable
, versionable
.Support via yum
.
Using this provider’s uninstallable
feature will not remove dependent packages. To
remove dependent packages with this provider use the purgeable
feature, but note this
feature is destructive and should be used with the utmost care.
This provider supports the install_options
attribute, which allows command-line flags to be passed to yum.
These options should be specified as a string (e.g. ‘–flag’), a hash (e.g. {‘–flag’ => ‘value’}),
or an array where each element is either a string or a hash.
rpm
, yum
.osfamily
== redhat
.install_options
, installable
, purgeable
, uninstallable
, upgradeable
, versionable
, virtual_packages
.Support for SuSE zypper
package manager. Found in SLES10sp2+ and SLES11.
This provider supports the install_options
attribute, which allows command-line flags to be passed to zypper.
These options should be specified as a string (e.g. ‘–flag’), a hash (e.g. {‘–flag’ => ‘value’}),
or an array where each element is either a string or a hash.
/usr/bin/zypper
.operatingsystem
== suse, sles, sled, opensuse
.install_options
, installable
, uninstallable
, upgradeable
, versionable
, virtual_packages
.Available features:
holdable
— The provider is capable of placing packages on hold such that they are not automatically upgraded as a result of other package dependencies unless explicit action is taken by a user or another package. Held is considered a superset of installed.install_options
— The provider accepts options to be passed to the installer command.installable
— The provider can install packages.package_settings
— The provider accepts package_settings to be ensured for the given package. The meaning and format of these settings is provider-specific.purgeable
— The provider can purge packages. This generally means that all traces of the package are removed, including existing configuration files. This feature is thus destructive and should be used with the utmost care.reinstallable
— The provider can reinstall packages.uninstall_options
— The provider accepts options to be passed to the uninstaller command.uninstallable
— The provider can uninstall packages.upgradeable
— The provider can upgrade to the latest version of a package. This feature is used by specifying latest
as the desired value for the package.versionable
— The provider is capable of interrogating the package database for installed version(s), and can select which out of a set of available versions of a package to install if asked.virtual_packages
— The provider accepts virtual package names for install and uninstall.Provider support:
Provider | holdable | install options | installable | package settings | purgeable | reinstallable | uninstall options | uninstallable | upgradeable | versionable | virtual packages |
---|---|---|---|---|---|---|---|---|---|---|---|
aix | X | X | X | X | |||||||
appdmg | X | ||||||||||
apple | X | ||||||||||
apt | X | X | X | X | X | X | X | ||||
aptitude | X | X | X | X | X | X | |||||
aptrpm | X | X | X | X | X | ||||||
blastwave | X | X | X | ||||||||
dnf | X | X | X | X | X | X | X | ||||
dpkg | X | X | X | X | X | ||||||
fink | X | X | X | X | X | X | |||||
freebsd | X | X | X | X | |||||||
gem | X | X | X | X | X | X | |||||
hpux | X | X | |||||||||
macports | X | X | X | X | |||||||
nim | X | X | X | X | |||||||
openbsd | X | X | X | X | X | X | X | ||||
opkg | X | X | X | ||||||||
pacman | X | X | X | X | X | X | |||||
pip | X | X | X | X | X | ||||||
pip3 | X | X | X | X | X | ||||||
pkg | X | X | X | X | X | ||||||
pkgdmg | X | ||||||||||
pkgin | X | X | X | X | |||||||
pkgng | X | X | X | X | |||||||
pkgutil | X | X | X | ||||||||
portage | X | X | X | X | X | ||||||
ports | X | X | X | X | |||||||
portupgrade | X | X | X | ||||||||
puppet_gem | X | X | X | X | X | X | |||||
rpm | X | X | X | X | X | X | X | ||||
rug | X | X | X | X | |||||||
sun | X | X | X | X | |||||||
sunfreeware | X | X | X | ||||||||
tdnf | X | X | X | X | X | X | X | ||||
up2date | X | X | X | ||||||||
urpmi | X | X | X | X | X | ||||||
windows | X | X | X | X | X | ||||||
yum | X | X | X | X | X | X | X | ||||
zypper | X | X | X | X | X | X |
This is a metatype that can manage other resource types. Any
metaparams specified here will be passed on to any generated resources,
so you can purge unmanaged resources but set noop
to true so the
purging is only logged and does not actually happen.
resources { 'resource title':
name => # (namevar) The name of the type to be...
purge => # Whether to purge unmanaged resources. When set...
unless_system_user => # This keeps system users from being purged. By...
unless_uid => # This keeps specific uids or ranges of uids from...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The name of the type to be managed.
(↑ Back to resources attributes)
Whether to purge unmanaged resources. When set to true
, this will
delete any resource that is not specified in your configuration and is not
autorequired by any managed resources. Note: The ssh_authorized_key
resource type can’t be purged this way; instead, see the purge_ssh_keys
attribute of the user
type.
Valid values are true
, false
, yes
, no
.
(↑ Back to resources attributes)
This keeps system users from being purged. By default, it does not purge users whose UIDs are less than the minimum UID for the system (typically 500 or 1000), but you can specify a different UID as the inclusive limit.
Valid values are true
, false
. Values can match /^\d+$/
.
(↑ Back to resources attributes)
This keeps specific uids or ranges of uids from being purged when purge is true. Accepts integers, integer strings, and arrays of integers or integer strings. To specify a range of uids, consider using the range() function from stdlib.
(↑ Back to resources attributes)
Manages connected router.
router { 'resource title':
url => # (namevar) An SSH or telnet URL at which to access the...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
An SSH or telnet URL at which to access the router, in the form
ssh://user:pass:enable@host/
or telnet://user:pass:enable@host/
.
Define schedules for Puppet. Resources can be limited to a schedule by using the
schedule
metaparameter.
Currently, schedules can only be used to stop a resource from being applied; they cannot cause a resource to be applied when it otherwise wouldn’t be, and they cannot accurately specify a time when a resource should run.
Every time Puppet applies its configuration, it will apply the set of resources whose schedule does not eliminate them from running right then, but there is currently no system in place to guarantee that a given resource runs at a given time. If you specify a very restrictive schedule and Puppet happens to run at a time within that schedule, then the resources will get applied; otherwise, that work may never get done.
Thus, it is advisable to use wider scheduling (e.g., over a couple of hours) combined with periods and repetitions. For instance, if you wanted to restrict certain resources to only running once, between the hours of two and 4 AM, then you would use this schedule:
schedule { 'maint':
range => '2 - 4',
period => daily,
repeat => 1,
}
With this schedule, the first time that Puppet runs between 2 and 4 AM, all resources with this schedule will get applied, but they won’t get applied again between 2 and 4 because they will have already run once that day, and they won’t get applied outside that schedule because they will be outside the scheduled range.
Puppet automatically creates a schedule for each of the valid periods
with the same name as that period (e.g., hourly and daily).
Additionally, a schedule named puppet
is created and used as the
default, with the following attributes:
schedule { 'puppet':
period => hourly,
repeat => 2,
}
This will cause resources to be applied every 30 minutes by default.
schedule { 'resource title':
name => # (namevar) The name of the schedule. This name is used...
period => # The period of repetition for resources on this...
periodmatch => # Whether periods should be matched by number...
range => # The earliest and latest that a resource can be...
repeat => # How often a given resource may be applied in...
weekday => # The days of the week in which the schedule...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The name of the schedule. This name is used when assigning the schedule
to a resource with the schedule
metaparameter:
schedule { 'everyday':
period => daily,
range => '2 - 4',
}
exec { '/usr/bin/apt-get update':
schedule => 'everyday',
}
(↑ Back to schedule attributes)
The period of repetition for resources on this schedule. The default is for resources to get applied every time Puppet runs.
Note that the period defines how often a given resource will get
applied but not when; if you would like to restrict the hours
that a given resource can be applied (e.g., only at night during
a maintenance window), then use the range
attribute.
If the provided periods are not sufficient, you can provide a value to the repeat attribute, which will cause Puppet to schedule the affected resources evenly in the period the specified number of times. Take this schedule:
schedule { 'veryoften':
period => hourly,
repeat => 6,
}
This can cause Puppet to apply that resource up to every 10 minutes.
At the moment, Puppet cannot guarantee that level of repetition; that is, the resource can applied up to every 10 minutes, but internal factors might prevent it from actually running that often (e.g. if a Puppet run is still in progress when the next run is scheduled to start, that next run will be suppressed).
See the periodmatch
attribute for tuning whether to match
times by their distance apart or by their specific value.
Valid values are hourly
, daily
, weekly
, monthly
, never
.
(↑ Back to schedule attributes)
Whether periods should be matched by number (e.g., the two times are in the same hour) or by distance (e.g., the two times are 60 minutes apart).
Valid values are number
, distance
.
(↑ Back to schedule attributes)
The earliest and latest that a resource can be applied. This is always a hyphen-separated range within a 24 hour period, and hours must be specified in numbers between 0 and 23, inclusive. Minutes and seconds can optionally be provided, using the normal colon as a separator. For instance:
schedule { 'maintenance':
range => '1:30 - 4:30',
}
This is mostly useful for restricting certain resources to being applied in maintenance windows or during off-peak hours. Multiple ranges can be applied in array context. As a convenience when specifying ranges, you may cross midnight (e.g.: range => “22:00 - 04:00”).
(↑ Back to schedule attributes)
How often a given resource may be applied in this schedule’s period
.
Defaults to 1; must be an integer.
(↑ Back to schedule attributes)
The days of the week in which the schedule should be valid. You may specify the full day name (Tuesday), the three character abbreviation (Tue), or a number corresponding to the day of the week where 0 is Sunday, 1 is Monday, etc. Multiple days can be specified as an array. If not specified, the day of the week will not be considered in the schedule.
If you are also using a range match that spans across midnight then this parameter will match the day that it was at the start of the range, not necessarily the day that it is when it matches. For example, consider this schedule:
schedule { 'maintenance_window':
range => '22:00 - 04:00',
weekday => 'Saturday',
}
This will match at 11 PM on Saturday and 2 AM on Sunday, but not at 2 AM on Saturday.
(↑ Back to schedule attributes)
Installs and manages Windows Scheduled Tasks. All attributes
except name
, command
, and trigger
are optional; see the description
of the trigger
attribute for details on setting schedules.
scheduled_task { 'resource title':
name => # (namevar) The name assigned to the scheduled task. This...
ensure => # The basic property that the resource should be...
arguments => # Any arguments or flags that should be passed to...
command => # The full path to the application to run, without
enabled => # Whether the triggers for this task should be...
password => # The password for the user specified in the...
provider => # The specific backend to use for this...
trigger => # One or more triggers defining when the task...
user => # The user to run the scheduled task as. Please...
working_dir => # The full path of the directory in which to start
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The name assigned to the scheduled task. This will uniquely identify the task on the system.
(↑ Back to scheduled_task attributes)
(Property: This attribute represents concrete state on the target system.)
The basic property that the resource should be in.
Valid values are present
, absent
.
(↑ Back to scheduled_task attributes)
(Property: This attribute represents concrete state on the target system.)
Any arguments or flags that should be passed to the command. Multiple arguments should be specified as a space-separated string.
(↑ Back to scheduled_task attributes)
(Property: This attribute represents concrete state on the target system.)
The full path to the application to run, without any arguments.
(↑ Back to scheduled_task attributes)
(Property: This attribute represents concrete state on the target system.)
Whether the triggers for this task should be enabled. This attribute affects every trigger for the task; triggers cannot be enabled or disabled individually.
Valid values are true
, false
.
(↑ Back to scheduled_task attributes)
The password for the user specified in the ‘user’ attribute. This is only used if specifying a user other than ‘SYSTEM’. Since there is no way to retrieve the password used to set the account information for a task, this parameter will not be used to determine if a scheduled task is in sync or not.
(↑ Back to scheduled_task attributes)
The specific backend to use for this scheduled_task
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
(↑ Back to scheduled_task attributes)
(Property: This attribute represents concrete state on the target system.)
One or more triggers defining when the task should run. A single trigger is represented as a hash, and multiple triggers can be specified with an array of hashes.
A trigger can contain the following keys:
schedule
(Required) — What kind of trigger this is.
Valid values are daily
, weekly
, monthly
, or once
. Each kind
of trigger is configured with a different set of keys; see the
sections below. (once
triggers only need a start time/date.)start_time
(Required) — The time of day when the trigger should
first become active. Several time formats will work, but we
suggest 24-hour time formatted as HH:MM.start_date
— The date when the trigger should first become active.
Defaults to the current date. You should format dates as YYYY-MM-DD,
although other date formats may work. (Under the hood, this uses Date.parse
.)minutes_interval
— The repeat interval in minutes.minutes_duration
— The duration in minutes, needs to be greater than the
minutes_interval.daily
triggers:
every
— How often the task should run, as a number of days. Defaults
to 1. (“2” means every other day, “3” means every three days, etc.)weekly
triggers:
every
— How often the task should run, as a number of weeks. Defaults
to 1. (“2” means every other week, “3” means every three weeks, etc.)day_of_week
— Which days of the week the task should run, as an array.
Defaults to all days. Each day must be one of mon
, tues
,
wed
, thurs
, fri
, sat
, sun
, or all
.monthly
(by date) triggers:
months
— Which months the task should run, as an array. Defaults to
all months. Each month must be an integer between 1 and 12.on
(Required) — Which days of the month the task should run,
as an array. Each day must be an integer between 1 and 31.monthly
(by weekday) triggers:
months
— Which months the task should run, as an array. Defaults to
all months. Each month must be an integer between 1 and 12.day_of_week
(Required) — Which day of the week the task should
run, as an array with only one element. Each day must be one of mon
,
tues
, wed
, thurs
, fri
, sat
, sun
, or all
.which_occurrence
(Required) — The occurrence of the chosen weekday
when the task should run. Must be one of first
, second
, third
,
fourth
, or fifth
.Examples:
# Run at 8am on the 1st and 15th days of the month in January, March,
# May, July, September, and November, starting after August 31st, 2011.
trigger => {
schedule => monthly,
start_date => '2011-08-31', # Defaults to current date
start_time => '08:00', # Must be specified
months => [1,3,5,7,9,11], # Defaults to all
on => [1, 15], # Must be specified
}
# Run at 8am on the first Monday of the month for January, March, and May,
# starting after August 31st, 2011.
trigger => {
schedule => monthly,
start_date => '2011-08-31', # Defaults to current date
start_time => '08:00', # Must be specified
months => [1,3,5], # Defaults to all
which_occurrence => first, # Must be specified
day_of_week => [mon], # Must be specified
}
# Run daily repeating every 30 minutes between 9am and 5pm (480 minutes) starting after August 31st, 2011.
trigger => {
schedule => daily,
start_date => '2011-08-31', # Defaults to current date
start_time => '8:00', # Must be specified
minutes_interval => 30,
minutes_duration => 480,
}
(↑ Back to scheduled_task attributes)
(Property: This attribute represents concrete state on the target system.)
The user to run the scheduled task as. Please note that not all security configurations will allow running a scheduled task as ‘SYSTEM’, and saving the scheduled task under these conditions will fail with a reported error of ‘The operation completed successfully’. It is recommended that you either choose another user to run the scheduled task, or alter the security policy to allow v1 scheduled tasks to run as the ‘SYSTEM’ account. Defaults to ‘SYSTEM’.
Please also note that Puppet must be running as a privileged user
in order to manage scheduled_task
resources. Running as an
unprivileged user will result in ‘access denied’ errors.
(↑ Back to scheduled_task attributes)
(Property: This attribute represents concrete state on the target system.)
The full path of the directory in which to start the command.
(↑ Back to scheduled_task attributes)
This provider manages scheduled tasks on Windows.
operatingsystem
== windows
.Manages SELinux booleans on systems with SELinux support. The supported booleans
are any of the ones found in /selinux/booleans/
.
selboolean { 'resource title':
name => # (namevar) The name of the SELinux boolean to be...
persistent => # If set true, SELinux booleans will be written to
provider => # The specific backend to use for this...
value => # Whether the SELinux boolean should be enabled or
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The name of the SELinux boolean to be managed.
(↑ Back to selboolean attributes)
If set true, SELinux booleans will be written to disk and persist across reboots.
The default is false
.
Valid values are true
, false
.
(↑ Back to selboolean attributes)
The specific backend to use for this selboolean
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
(↑ Back to selboolean attributes)
(Property: This attribute represents concrete state on the target system.)
Whether the SELinux boolean should be enabled or disabled.
Valid values are on
, off
.
(↑ Back to selboolean attributes)
Manage SELinux booleans using the getsebool and setsebool binaries.
/usr/sbin/getsebool
, /usr/sbin/setsebool
.Manages loading and unloading of SELinux policy modules on the system. Requires SELinux support. See man semodule(8) for more information on SELinux policy modules.
Autorequires: If Puppet is managing the file containing this SELinux
policy module (which is either explicitly specified in the selmodulepath
attribute or will be found at {selmoduledir
}/{name
}.pp), the selmodule
resource will autorequire that file.
selmodule { 'resource title':
name => # (namevar) The name of the SELinux policy to be managed....
ensure => # The basic property that the resource should be...
provider => # The specific backend to use for this `selmodule`
selmoduledir => # The directory to look for the compiled pp module
selmodulepath => # The full path to the compiled .pp policy module.
syncversion => # If set to `true`, the policy will be reloaded if
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The name of the SELinux policy to be managed. You should not include the customary trailing .pp extension.
(↑ Back to selmodule attributes)
(Property: This attribute represents concrete state on the target system.)
The basic property that the resource should be in.
Valid values are present
, absent
.
(↑ Back to selmodule attributes)
The specific backend to use for this selmodule
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
(↑ Back to selmodule attributes)
The directory to look for the compiled pp module file in.
Currently defaults to /usr/share/selinux/targeted
. If the
selmodulepath
attribute is not specified, Puppet will expect to find
the module in <selmoduledir>/<name>.pp
, where name
is the value of the
name
parameter.
(↑ Back to selmodule attributes)
The full path to the compiled .pp policy module. You only need to use
this if the module file is not in the selmoduledir
directory.
(↑ Back to selmodule attributes)
(Property: This attribute represents concrete state on the target system.)
If set to true
, the policy will be reloaded if the
version found in the on-disk file differs from the loaded
version. If set to false
(the default) the only check
that will be made is if the policy is loaded at all or not.
Valid values are true
, false
.
(↑ Back to selmodule attributes)
Manage SELinux policy modules using the semodule binary.
/usr/sbin/semodule
.Manage running services. Service support unfortunately varies widely by platform — some platforms have very little if any concept of a running service, and some have a very codified and powerful concept. Puppet’s service support is usually capable of doing the right thing, but the more information you can provide, the better behaviour you will get.
Puppet 2.7 and newer expect init scripts to have a working status command.
If this isn’t the case for any of your services’ init scripts, you will
need to set hasstatus
to false and possibly specify a custom status
command in the status
attribute. As a last resort, Puppet will attempt to
search the process table by calling whatever command is listed in the ps
fact. The default search pattern is the name of the service, but you can
specify it with the pattern
attribute.
Refresh: service
resources can respond to refresh events (via
notify
, subscribe
, or the ~>
arrow). If a service
receives an
event from another resource, Puppet will restart the service it manages.
The actual command used to restart the service depends on the platform and
can be configured:
hasrestart
to true, Puppet will use the init script’s restart command.restart
attribute.service { 'resource title':
name => # (namevar) The name of the service to run. This name is...
ensure => # Whether a service should be running. Valid...
binary => # The path to the daemon. This is only used for...
control => # The control variable used to manage services...
enable => # Whether a service should be enabled to start at...
flags => # Specify a string of flags to pass to the startup
hasrestart => # Specify that an init script has a `restart...
hasstatus => # Declare whether the service's init script has a...
manifest => # Specify a command to config a service, or a path
path => # The search path for finding init scripts....
pattern => # The pattern to search for in the process table...
provider => # The specific backend to use for this `service...
restart => # Specify a *restart* command manually. If left...
start => # Specify a *start* command manually. Most...
status => # Specify a *status* command manually. This...
stop => # Specify a *stop* command...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The name of the service to run.
This name is used to find the service; on platforms where services have short system names and long display names, this should be the short name. (To take an example from Windows, you would use “wuauserv” rather than “Automatic Updates.”)
(↑ Back to service attributes)
(Property: This attribute represents concrete state on the target system.)
Whether a service should be running.
Valid values are stopped
(also called false
), running
(also called true
).
(↑ Back to service attributes)
The path to the daemon. This is only used for
systems that do not support init scripts. This binary will be
used to start the service if no start
parameter is
provided.
(↑ Back to service attributes)
The control variable used to manage services (originally for HP-UX).
Defaults to the upcased service name plus START
replacing dots with
underscores, for those providers that support the controllable
feature.
(↑ Back to service attributes)
(Property: This attribute represents concrete state on the target system.)
Whether a service should be enabled to start at boot. This property behaves quite differently depending on the platform; wherever possible, it relies on local tools to enable or disable a given service.
Valid values are true
, false
, manual
, mask
.
Requires features enableable.
(↑ Back to service attributes)
(Property: This attribute represents concrete state on the target system.)
Specify a string of flags to pass to the startup script.
Requires features flaggable.
(↑ Back to service attributes)
Specify that an init script has a restart
command. If this is
false and you do not specify a command in the restart
attribute,
the init script’s stop
and start
commands will be used.
Defaults to false.
Valid values are true
, false
.
(↑ Back to service attributes)
Declare whether the service’s init script has a functional status
command; defaults to true
. This attribute’s default value changed in
Puppet 2.7.0.
The init script’s status command must return 0 if the service is running and a nonzero value otherwise. Ideally, these exit codes should conform to the LSB’s specification for init script status actions, but Puppet only considers the difference between 0 and nonzero to be relevant.
If a service’s init script does not support any kind of status command,
you should set hasstatus
to false and either provide a specific
command using the status
attribute or expect that Puppet will look for
the service name in the process table. Be aware that ‘virtual’ init
scripts (like ‘network’ under Red Hat systems) will respond poorly to
refresh events from other resources if you override the default behavior
without providing a status command.
Valid values are true
, false
.
(↑ Back to service attributes)
Specify a command to config a service, or a path to a manifest to do so.
(↑ Back to service attributes)
The search path for finding init scripts. Multiple values should be separated by colons or provided as an array.
(↑ Back to service attributes)
The pattern to search for in the process table. This is used for stopping services on platforms that do not support init scripts, and is also used for determining service status on those service whose init scripts do not include a status command.
Defaults to the name of the service. The pattern can be a simple string or any legal Ruby pattern, including regular expressions (which should be quoted without enclosing slashes).
(↑ Back to service attributes)
The specific backend to use for this service
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
base
bsd
daemontools
debian
freebsd
gentoo
init
launchd
openbsd
openrc
openwrt
rcng
redhat
runit
service
smf
src
systemd
upstart
windows
(↑ Back to service attributes)
Specify a restart command manually. If left unspecified, the service will be stopped and then started.
(↑ Back to service attributes)
Specify a start command manually. Most service subsystems
support a start
command, so this will not need to be
specified.
(↑ Back to service attributes)
Specify a status command manually. This command must return 0 if the service is running and a nonzero value otherwise. Ideally, these exit codes should conform to the LSB’s specification for init script status actions, but Puppet only considers the difference between 0 and nonzero to be relevant.
If left unspecified, the status of the service will be determined automatically, usually by looking for the service in the process table.
(↑ Back to service attributes)
Specify a stop command manually.
(↑ Back to service attributes)
The simplest form of Unix service support.
You have to specify enough about your service for this to work; the
minimum you can specify is a binary for starting the process, and this
same binary will be searched for in the process table to stop the
service. As with init
-style services, it is preferable to specify start,
stop, and status commands.
kill
.refreshable
.Generic BSD form of init
-style service management with rc.d
.
Uses rc.conf.d
for service enabling and disabling.
enableable
, refreshable
.Daemontools service management.
This provider manages daemons supervised by D.J. Bernstein daemontools. When detecting the service directory it will check, in order of preference:
/service
/etc/service
/var/lib/svscan
The daemon directory should be in one of the following locations:
/var/lib/service
/etc
…or this can be overridden in the resource’s attributes:
service { 'myservice':
provider => 'daemontools',
path => '/path/to/daemons',
}
This provider supports out of the box:
If a service has ensure => "running"
, it will link /path/to/daemon to
/path/to/service, which will automatically enable the service.
If a service has ensure => "stopped"
, it will only shut down the service, not
remove the /path/to/service
link.
/usr/bin/svc
, /usr/bin/svstat
.enableable
, refreshable
.Debian’s form of init
-style management.
The only differences from init
are support for enabling and disabling
services via update-rc.d
and the ability to determine enabled status via
invoke-rc.d
.
/usr/sbin/invoke-rc.d
, /usr/sbin/service
, /usr/sbin/update-rc.d
.operatingsystem
== cumuluslinux
and operatingsystemmajrelease
== 1, 2
. Default for operatingsystem
== debian
and operatingsystemmajrelease
== 5, 6, 7
.enableable
, refreshable
.Provider for FreeBSD and DragonFly BSD. Uses the rcvar
argument of init scripts and parses/edits rc files.
operatingsystem
== freebsd, dragonfly
.enableable
, refreshable
.Gentoo’s form of init
-style service management.
Uses rc-update
for service enabling and disabling.
/sbin/rc-update
.enableable
, refreshable
.Standard init
-style service management.
refreshable
.This provider manages jobs with launchd
, which is the default service
framework for Mac OS X (and may be available for use on other platforms).
For launchd
documentation, see:
This provider reads plists out of the following directories:
/System/Library/LaunchDaemons
/System/Library/LaunchAgents
/Library/LaunchDaemons
/Library/LaunchAgents
…and builds up a list of services based upon each plist’s “Label” entry.
This provider supports:
Here is how the Puppet states correspond to launchd
states:
Note that this allows you to do something launchctl
can’t do, which is to
be in a state of “stopped/enabled” or “running/disabled”.
Note that this provider does not support overriding ‘restart’
/bin/launchctl
.operatingsystem
== darwin
.enableable
, refreshable
.Provider for OpenBSD’s rc.d daemon control scripts
/usr/sbin/rcctl
.operatingsystem
== openbsd
.enableable
, flaggable
, refreshable
.Support for Gentoo’s OpenRC initskripts
Uses rc-update, rc-status and rc-service to manage services.
/bin/rc-status
, /sbin/rc-service
, /sbin/rc-update
.operatingsystem
== gentoo
. Default for operatingsystem
== funtoo
.enableable
, refreshable
.Support for OpenWrt flavored init scripts.
Uses /etc/init.d/service_name enable, disable, and enabled.
operatingsystem
== openwrt
.enableable
, refreshable
.RCng service management with rc.d
operatingsystem
== netbsd, cargos
.enableable
, refreshable
.Red Hat’s (and probably many others’) form of init
-style service
management. Uses chkconfig
for service enabling and disabling.
/sbin/chkconfig
, /sbin/service
.osfamily
== redhat
. Default for operatingsystemmajrelease
== 10, 11
and osfamily
== suse
.enableable
, refreshable
.Runit service management.
This provider manages daemons running supervised by Runit. When detecting the service directory it will check, in order of preference:
/service
/etc/service
/var/service
The daemon directory should be in one of the following locations:
/etc/sv
/var/lib/service
or this can be overridden in the service resource parameters:
service { 'myservice':
provider => 'runit',
path => '/path/to/daemons',
}
This provider supports out of the box:
status
/usr/bin/sv
.enableable
, refreshable
.The simplest form of service support.
refreshable
.Support for Sun’s new Service Management Framework.
Starting a service is effectively equivalent to enabling it, so there is only support for starting and stopping services, which also enables and disables them, respectively.
By specifying manifest => "/path/to/service.xml"
, the SMF manifest will
be imported if it does not exist.
/usr/bin/svcs
, /usr/sbin/svcadm
, /usr/sbin/svccfg
.osfamily
== solaris
.enableable
, refreshable
.Support for AIX’s System Resource controller.
Services are started/stopped based on the stopsrc
and startsrc
commands, and some services can be refreshed with refresh
command.
Enabling and disabling services is not supported, as it requires
modifications to /etc/inittab
. Starting and stopping groups of subsystems
is not yet supported.
/usr/bin/lssrc
, /usr/bin/refresh
, /usr/bin/startsrc
, /usr/bin/stopsrc
, /usr/sbin/chitab
, /usr/sbin/lsitab
, /usr/sbin/mkitab
, /usr/sbin/rmitab
.operatingsystem
== aix
.enableable
, refreshable
.Manages systemd
services using systemctl
.
Because systemd
defaults to assuming the .service
unit type, the suffix
may be omitted. Other unit types (such as .path
) may be managed by
providing the proper suffix.
systemctl
.osfamily
== archlinux
. Default for operatingsystemmajrelease
== 7
and osfamily
== redhat
. Default for operatingsystem
== fedora
and osfamily
== redhat
. Default for osfamily
== suse
. Default for osfamily
== coreos
. Default for operatingsystem
== amazon
and operatingsystemmajrelease
== 2
. Default for operatingsystem
== debian
and operatingsystemmajrelease
== 8, stretch/sid, 9, buster/sid
. Default for operatingsystem
== ubuntu
and operatingsystemmajrelease
== 15.04, 15.10, 16.04, 16.10
. Default for operatingsystem
== cumuluslinux
and operatingsystemmajrelease
== 3
.enableable
, maskable
, refreshable
.Ubuntu service management with upstart
.
This provider manages upstart
jobs on Ubuntu. For upstart
documentation,
see http://upstart.ubuntu.com/.
/sbin/initctl
, /sbin/restart
, /sbin/start
, /sbin/status
, /sbin/stop
.operatingsystem
== ubuntu
and operatingsystemmajrelease
== 10.04, 12.04, 14.04, 14.10
.enableable
, refreshable
.Support for Windows Service Control Manager (SCM). This provider can start, stop, enable, and disable services, and the SCM provides working status methods for all services.
Control of service groups (dependencies) is not yet supported, nor is running services as a specific user.
net.exe
.operatingsystem
== windows
.enableable
, refreshable
.Available features:
controllable
— The provider uses a control variable.enableable
— The provider can enable and disable the serviceflaggable
— The provider can pass flags to the service.maskable
— The provider can ‘mask’ the service.refreshable
— The provider can restart the service.Provider support:
Provider | controllable | enableable | flaggable | maskable | refreshable |
---|---|---|---|---|---|
base | X | ||||
bsd | X | X | |||
daemontools | X | X | |||
debian | X | X | |||
freebsd | X | X | |||
gentoo | X | X | |||
init | X | ||||
launchd | X | X | |||
openbsd | X | X | X | ||
openrc | X | X | |||
openwrt | X | X | |||
rcng | X | X | |||
redhat | X | X | |||
runit | X | X | |||
service | X | ||||
smf | X | X | |||
src | X | X | |||
systemd | X | X | X | ||
upstart | X | X | |||
windows | X | X |
Manages SSH authorized keys. Currently only type 2 keys are supported.
In their native habitat, SSH keys usually appear as a single long line, in
the format <TYPE> <KEY> <NAME/COMMENT>
. This resource type requires you
to split that line into several attributes. Thus, a key that appears in
your ~/.ssh/id_rsa.pub
file like this…
ssh-rsa AAAAB3Nza[...]qXfdaQ== nick@magpie.example.com
…would translate to the following resource:
ssh_authorized_key { 'nick@magpie.example.com':
ensure => present,
user => 'nick',
type => 'ssh-rsa',
key => 'AAAAB3Nza[...]qXfdaQ==',
}
To ensure that only the currently approved keys are present, you can purge
unmanaged SSH keys on a per-user basis. Do this with the user
resource
type’s purge_ssh_keys
attribute:
user { 'nick':
ensure => present,
purge_ssh_keys => true,
}
This will remove any keys in ~/.ssh/authorized_keys
that aren’t being
managed with ssh_authorized_key
resources. See the documentation of the
user
type for more details.
Autorequires: If Puppet is managing the user account in which this
SSH key should be installed, the ssh_authorized_key
resource will autorequire
that user.
ssh_authorized_key { 'resource title':
name => # (namevar) The SSH key comment. This can be anything, and...
ensure => # The basic property that the resource should be...
key => # The public key itself; generally a long string...
options => # Key options; see sshd(8) for possible values...
provider => # The specific backend to use for this...
target => # The absolute filename in which to store the SSH...
type => # The encryption type used. Valid values are...
user => # The user account in which the SSH key should be...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The SSH key comment. This can be anything, and doesn’t need to match
the original comment from the .pub
file.
Due to internal limitations, this must be unique across all user accounts; if you want to specify one key for multiple users, you must use a different comment for each instance.
(↑ Back to ssh_authorized_key attributes)
(Property: This attribute represents concrete state on the target system.)
The basic property that the resource should be in.
Valid values are present
, absent
.
(↑ Back to ssh_authorized_key attributes)
(Property: This attribute represents concrete state on the target system.)
The public key itself; generally a long string of hex characters. The key
attribute may not contain whitespace.
Make sure to omit the following in this attribute (and specify them in other attributes):
type
attribute.name
attribute/resource title.(↑ Back to ssh_authorized_key attributes)
(Property: This attribute represents concrete state on the target system.)
Key options; see sshd(8) for possible values. Multiple values should be specified as an array.
(↑ Back to ssh_authorized_key attributes)
The specific backend to use for this ssh_authorized_key
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
(↑ Back to ssh_authorized_key attributes)
(Property: This attribute represents concrete state on the target system.)
The absolute filename in which to store the SSH key. This
property is optional and should only be used in cases where keys
are stored in a non-standard location (i.e. not in
~user/.ssh/authorized_keys`).
(↑ Back to ssh_authorized_key attributes)
(Property: This attribute represents concrete state on the target system.)
The encryption type used.
Valid values are ssh-dss
(also called dsa
), ssh-rsa
(also called rsa
), ecdsa-sha2-nistp256
, ecdsa-sha2-nistp384
, ecdsa-sha2-nistp521
, ssh-ed25519
(also called ed25519
).
(↑ Back to ssh_authorized_key attributes)
(Property: This attribute represents concrete state on the target system.)
The user account in which the SSH key should be installed. The resource
will autorequire this user if it is being managed as a user
resource.
(↑ Back to ssh_authorized_key attributes)
Parse and generate authorized_keys files for SSH.
Installs and manages ssh host keys. By default, this type will
install keys into /etc/ssh/ssh_known_hosts
. To manage ssh keys in a
different known_hosts
file, such as a user’s personal known_hosts
,
pass its path to the target
parameter. See the ssh_authorized_key
type to manage authorized keys.
sshkey { 'resource title':
name => # (namevar) The host name that the key is associated...
ensure => # The basic property that the resource should be...
host_aliases => # Any aliases the host might have. Multiple...
key => # The key itself; generally a long string of...
provider => # The specific backend to use for this `sshkey...
target => # The file in which to store the ssh key. Only...
type => # The encryption type used. Probably ssh-dss or...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The host name that the key is associated with.
(Property: This attribute represents concrete state on the target system.)
The basic property that the resource should be in.
Valid values are present
, absent
.
(Property: This attribute represents concrete state on the target system.)
Any aliases the host might have. Multiple values must be specified as an array.
(Property: This attribute represents concrete state on the target system.)
The key itself; generally a long string of uuencoded characters.
The specific backend to use for this sshkey
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
(Property: This attribute represents concrete state on the target system.)
The file in which to store the ssh key. Only used by
the parsed
provider.
(Property: This attribute represents concrete state on the target system.)
The encryption type used. Probably ssh-dss or ssh-rsa.
Valid values are ssh-dss
(also called dsa
), ssh-ed25519
(also called ed25519
), ssh-rsa
(also called rsa
), ecdsa-sha2-nistp256
, ecdsa-sha2-nistp384
, ecdsa-sha2-nistp521
.
Parse and generate host-wide known hosts files for SSH.
A resource type for creating new run stages. Once a stage is available,
classes can be assigned to it by declaring them with the resource-like syntax
and using
the stage
metaparameter.
Note that new stages are not useful unless you also declare their order
in relation to the default main
stage.
A complete run stage example:
stage { 'pre':
before => Stage['main'],
}
class { 'apt-updates':
stage => 'pre',
}
Individual resources cannot be assigned to run stages; you can only set stages for classes.
stage { 'resource title':
name => # (namevar) The name of the stage. Use this as the value for
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The name of the stage. Use this as the value for the stage
metaparameter
when assigning classes to this stage.
Remove unwanted files based on specific criteria. Multiple criteria are OR’d together, so a file that is too large but is not old enough will still get tidied.
If you don’t specify either age
or size
, then all files will
be removed.
This resource type works by generating a file resource for every file that should be deleted and then letting that resource perform the actual deletion.
tidy { 'resource title':
path => # (namevar) The path to the file or directory to manage....
age => # Tidy files whose age is equal to or greater than
backup => # Whether tidied files should be backed up. Any...
matches => # One or more (shell type) file glob patterns...
recurse => # If target is a directory, recursively descend...
rmdirs => # Tidy directories in addition to files; that is...
size => # Tidy files whose size is equal to or greater...
type => # Set the mechanism for determining age. Default...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The path to the file or directory to manage. Must be fully qualified.
Tidy files whose age is equal to or greater than the specified time. You can choose seconds, minutes, hours, days, or weeks by specifying the first letter of any of those words (e.g., ‘1w’).
Specifying 0 will remove all files.
Whether tidied files should be backed up. Any values are passed
directly to the file resources used for actual file deletion, so consult
the file
type’s backup documentation to determine valid values.
One or more (shell type) file glob patterns, which restrict the list of files to be tidied to those whose basenames match at least one of the patterns specified. Multiple patterns can be specified using an array.
Example:
tidy { '/tmp':
age => '1w',
recurse => 1,
matches => [ '[0-9]pub*.tmp', '*.temp', 'tmpfile?' ],
}
This removes files from /tmp
if they are one week old or older,
are not in a subdirectory and match one of the shell globs given.
Note that the patterns are matched against the basename of each file – that is, your glob patterns should not have any ‘/’ characters in them, since you are only specifying against the last bit of the file.
Finally, note that you must now specify a non-zero/non-false value for recurse if matches is used, as matches only apply to files found by recursion (there’s no reason to use static patterns match against a statically determined path). Requiring explicit recursion clears up a common source of confusion.
If target is a directory, recursively descend into the directory looking for files to tidy.
Valid values are true
, false
, inf
. Values can match /^[0-9]+$/
.
Tidy directories in addition to files; that is, remove directories whose age is older than the specified criteria. This will only remove empty directories, so all contained files must also be tidied before a directory gets removed.
Valid values are true
, false
, yes
, no
.
Tidy files whose size is equal to or greater than the specified size. Unqualified values are in kilobytes, but b, k, m, g, and t can be appended to specify bytes, kilobytes, megabytes, gigabytes, and terabytes, respectively. Only the first character is significant, so the full word can also be used.
Set the mechanism for determining age. Default: atime.
Valid values are atime
, mtime
, ctime
.
Manage users. This type is mostly built to manage system users, so it is lacking some features useful for managing normal users.
This resource type uses the prescribed native tools for creating
groups and generally uses POSIX APIs for retrieving information
about them. It does not directly modify /etc/passwd
or anything.
Autorequires: If Puppet is managing the user’s primary group (as
provided in the gid
attribute) or any group listed in the groups
attribute then the user resource will autorequire that group. If Puppet
is managing any role accounts corresponding to the user’s roles, the
user resource will autorequire those role accounts.
user { 'resource title':
name => # (namevar) The user name. While naming limitations vary by...
ensure => # The basic state that the object should be in....
allowdupe => # Whether to allow duplicate UIDs. Defaults to...
attribute_membership => # Whether specified attribute value pairs should...
attributes => # Specify AIX attributes for the user in an array...
auth_membership => # Whether specified auths should be considered the
auths => # The auths the user has. Multiple auths should...
comment => # A description of the user. Generally the user's
expiry => # The expiry date for this user. Must be provided...
forcelocal => # Forces the management of local accounts when...
gid => # The user's primary group. Can be specified...
groups => # The groups to which the user belongs. The...
home => # The home directory of the user. The directory...
ia_load_module => # The name of the I&A module to use to manage this
iterations => # This is the number of iterations of a chained...
key_membership => # Whether specified key/value pairs should be...
keys => # Specify user attributes in an array of key ...
loginclass => # The name of login class to which the user...
managehome => # Whether to manage the home directory when Puppet
membership => # If `minimum` is specified, Puppet will ensure...
password => # The user's password, in whatever encrypted...
password_max_age => # The maximum number of days a password may be...
password_min_age => # The minimum number of days a password must be...
profile_membership => # Whether specified roles should be treated as the
profiles => # The profiles the user has. Multiple profiles...
project => # The name of the project associated with a user.
provider => # The specific backend to use for this `user...
purge_ssh_keys => # Whether to purge authorized SSH keys for this...
role_membership => # Whether specified roles should be considered the
roles => # The roles the user has. Multiple roles should...
salt => # This is the 32-byte salt used to generate the...
shell => # The user's login shell. The shell must exist...
system => # Whether the user is a system user, according to...
uid => # The user ID; must be specified numerically. If...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The user name. While naming limitations vary by operating system, it is advisable to restrict names to the lowest common denominator, which is a maximum of 8 characters beginning with a letter.
Note that Puppet considers user names to be case-sensitive, regardless of the platform’s own rules; be sure to always use the same case when referring to a given user.
(Property: This attribute represents concrete state on the target system.)
The basic state that the object should be in.
Valid values are present
, absent
, role
.
Whether to allow duplicate UIDs. Defaults to false
.
Valid values are true
, false
, yes
, no
.
Whether specified attribute value pairs should be treated as the
complete list (inclusive
) or the minimum list (minimum
) of
attribute/value pairs for the user. Defaults to minimum
.
Valid values are inclusive
, minimum
.
(Property: This attribute represents concrete state on the target system.)
Specify AIX attributes for the user in an array of attribute = value pairs.
Requires features manages_aix_lam.
Whether specified auths should be considered the complete list
(inclusive
) or the minimum list (minimum
) of auths the user
has. Defaults to minimum
.
Valid values are inclusive
, minimum
.
(Property: This attribute represents concrete state on the target system.)
The auths the user has. Multiple auths should be specified as an array.
Requires features manages_solaris_rbac.
(Property: This attribute represents concrete state on the target system.)
A description of the user. Generally the user’s full name.
(Property: This attribute represents concrete state on the target system.)
The expiry date for this user. Must be provided in
a zero-padded YYYY-MM-DD format — e.g. 2010-02-19.
If you want to ensure the user account never expires,
you can pass the special value absent
.
Valid values are absent
. Values can match /^\d{4}-\d{2}-\d{2}$/
.
Requires features manages_expiry.
Forces the management of local accounts when accounts are also being managed by some other NSS
Valid values are true
, false
, yes
, no
.
Requires features libuser.
(Property: This attribute represents concrete state on the target system.)
The user’s primary group. Can be specified numerically or by name.
This attribute is not supported on Windows systems; use the groups
attribute instead. (On Windows, designating a primary group is only
meaningful for domain accounts, which Puppet does not currently manage.)
(Property: This attribute represents concrete state on the target system.)
The groups to which the user belongs. The primary group should not be listed, and groups should be identified by name rather than by GID. Multiple groups should be specified as an array.
(Property: This attribute represents concrete state on the target system.)
The home directory of the user. The directory must be created separately and is not currently checked for existence.
The name of the I&A module to use to manage this user.
Requires features manages_aix_lam.
(Property: This attribute represents concrete state on the target system.)
This is the number of iterations of a chained computation of the PBKDF2 password hash. This parameter is used in OS X, and is required for managing passwords on OS X 10.8 and newer.
Requires features manages_password_salt.
Whether specified key/value pairs should be considered the
complete list (inclusive
) or the minimum list (minimum
) of
the user’s attributes. Defaults to minimum
.
Valid values are inclusive
, minimum
.
(Property: This attribute represents concrete state on the target system.)
Specify user attributes in an array of key = value pairs.
Requires features manages_solaris_rbac.
(Property: This attribute represents concrete state on the target system.)
The name of login class to which the user belongs.
Requires features manages_loginclass.
Whether to manage the home directory when Puppet creates or removes the user.
This creates the home directory if Puppet also creates the user account, and deletes the
home directory if Puppet also removes the user account. Defaults to false
.
This parameter has no effect unless Puppet is also creating or removing the user in the
resource at the same time. For instance, Puppet creates a home directory for a managed
user if ensure => present
and the user does not exist at the time of the Puppet run.
If the home directory is then deleted manually, Puppet will not recreate it on the next
run.
Valid values are true
, false
, yes
, no
.
If minimum
is specified, Puppet will ensure that the user is a
member of all specified groups, but will not remove any other groups
that the user is a part of.
If inclusive
is specified, Puppet will ensure that the user is a
member of only specified groups.
Defaults to minimum
.
Valid values are inclusive
, minimum
.
(Property: This attribute represents concrete state on the target system.)
The user’s password, in whatever encrypted format the local system requires. Consult your operating system’s documentation for acceptable password encryption formats and requirements.
sha1
function to generate a salted SHA1
hash from a password.str2saltedsha512
function
which can generate password hashes for these operating systems.salt
and iterations
attributes need to be specified as
well as the password.Enclose any value that includes a dollar sign ($) in single quotes (‘) to avoid accidental variable interpolation.
Requires features manages_passwords.
(Property: This attribute represents concrete state on the target system.)
The maximum number of days a password may be used before it must be changed.
Requires features manages_password_age.
(Property: This attribute represents concrete state on the target system.)
The minimum number of days a password must be used before it may be changed.
Requires features manages_password_age.
Whether specified roles should be treated as the complete list
(inclusive
) or the minimum list (minimum
) of roles
of which the user is a member. Defaults to minimum
.
Valid values are inclusive
, minimum
.
(Property: This attribute represents concrete state on the target system.)
The profiles the user has. Multiple profiles should be specified as an array.
Requires features manages_solaris_rbac.
(Property: This attribute represents concrete state on the target system.)
The name of the project associated with a user.
Requires features manages_solaris_rbac.
The specific backend to use for this user
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
Whether to purge authorized SSH keys for this user if they are not managed
with the ssh_authorized_key
resource type. Allowed values are:
false
(default) — don’t purge SSH keys for this user.true
— look for keys in the .ssh/authorized_keys
file in the user’s
home directory. Purge any keys that aren’t managed as ssh_authorized_key
resources.ssh_authorized_key
resources. If any of
these paths starts with ~
or %h
, that token will be replaced with
the user’s home directory.Valid values are true
, false
.
Whether specified roles should be considered the complete list
(inclusive
) or the minimum list (minimum
) of roles the user
has. Defaults to minimum
.
Valid values are inclusive
, minimum
.
(Property: This attribute represents concrete state on the target system.)
The roles the user has. Multiple roles should be specified as an array.
Requires features manages_solaris_rbac.
(Property: This attribute represents concrete state on the target system.)
This is the 32-byte salt used to generate the PBKDF2 password used in OS X. This field is required for managing passwords on OS X >= 10.8.
Requires features manages_password_salt.
(Property: This attribute represents concrete state on the target system.)
The user’s login shell. The shell must exist and be executable.
This attribute cannot be managed on Windows systems.
Requires features manages_shell.
Whether the user is a system user, according to the OS’s criteria;
on most platforms, a UID less than or equal to 500 indicates a system
user. This parameter is only used when the resource is created and will
not affect the UID when the user is present. Defaults to false
.
Valid values are true
, false
, yes
, no
.
(Property: This attribute represents concrete state on the target system.)
The user ID; must be specified numerically. If no user ID is specified when creating a new user, then one will be chosen automatically. This will likely result in the same user having different UIDs on different systems, which is not recommended. This is especially noteworthy when managing the same user on both Darwin and other platforms, since Puppet does UID generation on Darwin, but the underlying tools do so on other platforms.
On Windows, this property is read-only and will return the user’s security identifier (SID).
User management for AIX.
/bin/chpasswd
, /usr/bin/chuser
, /usr/bin/mkuser
, /usr/sbin/lsgroup
, /usr/sbin/lsuser
, /usr/sbin/rmuser
.operatingsystem
== aix
.manages_aix_lam
, manages_expiry
, manages_homedir
, manages_password_age
, manages_passwords
, manages_shell
.User management on OS X.
/usr/bin/dscacheutil
, /usr/bin/dscl
, /usr/bin/dsimport
, /usr/bin/uuidgen
.operatingsystem
== darwin
.manages_password_salt
, manages_passwords
, manages_shell
.User management for HP-UX. This provider uses the undocumented -F
switch to HP-UX’s special usermod
binary to work around the fact that
its standard usermod
cannot make changes while the user is logged in.
New functionality provides for changing trusted computing passwords and
resetting password expirations under trusted computing.
/usr/sam/lbin/useradd.sam
, /usr/sam/lbin/userdel.sam
, /usr/sam/lbin/usermod.sam
.operatingsystem
== hp-ux
.allows_duplicates
, manages_homedir
, manages_passwords
.User management via LDAP.
This provider requires that you have valid values for all of the
LDAP-related settings in puppet.conf
, including ldapbase
. You will
almost definitely need settings for ldapuser
and ldappassword
in order
for your clients to write to LDAP.
Note that this provider will automatically generate a UID for you if you do not specify one, but it is a potentially expensive operation, as it iterates across all existing users to pick the appropriate next one.
manages_passwords
, manages_shell
.User management via useradd
and its ilk for OpenBSD. Note that you
will need to install Ruby’s shadow password library (package known as
ruby-shadow
) if you wish to manage user passwords.
passwd
, useradd
, userdel
, usermod
.operatingsystem
== openbsd
.manages_expiry
, manages_homedir
, manages_shell
, system_users
.User management via pw
on FreeBSD and DragonFly BSD.
pw
.operatingsystem
== freebsd, dragonfly
.allows_duplicates
, manages_expiry
, manages_homedir
, manages_passwords
, manages_shell
.User and role management on Solaris, via useradd
and roleadd
.
passwd
, roleadd
, roledel
, rolemod
, useradd
, userdel
, usermod
.osfamily
== solaris
.allows_duplicates
, manages_homedir
, manages_password_age
, manages_passwords
, manages_shell
, manages_solaris_rbac
.User management via useradd
and its ilk. Note that you will need to
install Ruby’s shadow password library (often known as ruby-libshadow
)
if you wish to manage user passwords.
chage
, luseradd
, useradd
, userdel
, usermod
.allows_duplicates
, manages_expiry
, manages_homedir
, manages_shell
, system_users
.Local user management for Windows.
operatingsystem
== windows
.manages_homedir
, manages_passwords
.Available features:
allows_duplicates
— The provider supports duplicate users with the same UID.libuser
— Allows local users to be managed on systems that also use some other remote NSS method of managing accounts.manages_aix_lam
— The provider can manage AIX Loadable Authentication Module (LAM) system.manages_expiry
— The provider can manage the expiry date for a user.manages_homedir
— The provider can create and remove home directories.manages_loginclass
— The provider can manage the login class for a user.manages_password_age
— The provider can set age requirements and restrictions for passwords.manages_password_salt
— The provider can set a password salt. This is for providers that implement PBKDF2 passwords with salt properties.manages_passwords
— The provider can modify user passwords, by accepting a password hash.manages_shell
— The provider allows for setting shell and validates if possiblemanages_solaris_rbac
— The provider can manage roles and normal userssystem_users
— The provider allows you to create system users with lower UIDs.Provider support:
Provider | allows duplicates | libuser | manages aix lam | manages expiry | manages homedir | manages loginclass | manages password age | manages password salt | manages passwords | manages shell | manages solaris rbac | system users |
---|---|---|---|---|---|---|---|---|---|---|---|---|
aix | X | X | X | X | X | X | ||||||
directoryservice | X | X | X | |||||||||
hpuxuseradd | X | X | X | |||||||||
ldap | X | X | ||||||||||
openbsd | X | X | X | X | X | X | ||||||
pw | X | X | X | X | X | |||||||
user_role_add | X | X | X | X | X | X | ||||||
useradd | X | X | X | X | X | X | X | X | ||||
windows_adsi | X | X |
Manages a VLAN on a router or switch.
vlan { 'resource title':
name => # (namevar) The numeric VLAN ID. Values can match...
ensure => # The basic property that the resource should be...
description => # The VLAN's...
device_url => # The URL of the router or switch maintaining this
provider => # The specific backend to use for this `vlan...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The numeric VLAN ID.
Values can match /^\d+/
.
(Property: This attribute represents concrete state on the target system.)
The basic property that the resource should be in.
Valid values are present
, absent
.
(Property: This attribute represents concrete state on the target system.)
The VLAN’s name.
The URL of the router or switch maintaining this VLAN.
The specific backend to use for this vlan
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
Cisco switch/router provider for vlans.
The client-side description of a yum repository. Repository
configurations are found by parsing /etc/yum.conf
and
the files indicated by the reposdir
option in that file
(see yum.conf(5)
for details).
Most parameters are identical to the ones documented
in the yum.conf(5)
man page.
Continuation lines that yum supports (for the baseurl
, for example)
are not supported. This type does not attempt to read or verify the
existence of files listed in the include
attribute.
yumrepo { 'resource title':
name => # (namevar) The name of the repository. This corresponds to
ensure => # The basic property that the resource should be...
assumeyes => # Determines if yum prompts for confirmation of...
bandwidth => # Use to specify the maximum available network...
baseurl => # The URL for this repository. Set this to...
cost => # Cost of this repository. Set this to `absent` to
deltarpm_metadata_percentage => # Percentage value that determines when to...
deltarpm_percentage => # Percentage value that determines when to use...
descr => # A human-readable description of the repository...
enabled => # Whether this repository is enabled. Valid values
enablegroups => # Whether yum will allow the use of package groups
exclude => # List of shell globs. Matching packages will...
failovermethod => # The failover method for this repository; should...
gpgcakey => # The URL for the GPG CA key for this repository...
gpgcheck => # Whether to check the GPG signature on packages...
gpgkey => # The URL for the GPG key with which packages from
http_caching => # What to cache from this repository. Set this to...
include => # The URL of a remote file containing additional...
includepkgs => # List of shell globs. If this is set, only...
keepalive => # Whether HTTP/1.1 keepalive should be used with...
metadata_expire => # Number of seconds after which the metadata will...
metalink => # Metalink for mirrors. Set this to `absent` to...
mirrorlist => # The URL that holds the list of mirrors for this...
mirrorlist_expire => # Time (in seconds) after which the mirrorlist...
priority => # Priority of this repository from 1-99. Requires...
protect => # Enable or disable protection for this...
provider => # The specific backend to use for this `yumrepo...
proxy => # URL of a proxy server that Yum should use when...
proxy_password => # Password for this proxy. Set this to `absent` to
proxy_username => # Username for this proxy. Set this to `absent` to
repo_gpgcheck => # Whether to check the GPG signature on repodata...
retries => # Set the number of times any attempt to retrieve...
s3_enabled => # Access the repository via S3. Valid values are...
skip_if_unavailable => # Should yum skip this repository if unable to...
sslcacert => # Path to the directory containing the databases...
sslclientcert => # Path to the SSL client certificate yum should...
sslclientkey => # Path to the SSL client key yum should use to...
sslverify => # Should yum verify SSL certificates/hosts at all.
target => # The filename to write the yum repository...
throttle => # Enable bandwidth throttling for downloads. This...
timeout => # Number of seconds to wait for a connection...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The name of the repository. This corresponds to the
repositoryid
parameter in yum.conf(5)
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
The basic property that the resource should be in.
Valid values are present
, absent
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
Determines if yum prompts for confirmation of critical actions.
Valid values are: false/0/no or true/1/yes.
Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /^(true|false|0|1|no|yes)$/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
Use to specify the maximum available network bandwidth
in bytes/second. Used with the throttle
option. If throttle
is a percentage and bandwidth
is 0
then bandwidth throttling
will be disabled. If throttle
is expressed as a data rate then
this option is ignored.
Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /^\d+[kMG]?$/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
The URL for this repository. Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /.*/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
Cost of this repository. Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /^\d+$/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
Percentage value that determines when to download deltarpm metadata.
When the deltarpm metadata is larger than this percentage value of the
package, deltarpm metadata is not downloaded.
Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /^\d+$/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
Percentage value that determines when to use deltas for this repository.
When the delta is larger than this percentage value of the package, the
delta is not used.
Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /^\d+$/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
A human-readable description of the repository.
This corresponds to the name parameter in yum.conf(5)
.
Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /.*/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
Whether this repository is enabled.
Valid values are: false/0/no or true/1/yes.
Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /^(true|false|0|1|no|yes)$/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
Whether yum will allow the use of package groups for this
repository.
Valid values are: false/0/no or true/1/yes.
Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /^(true|false|0|1|no|yes)$/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
List of shell globs. Matching packages will never be
considered in updates or installs for this repo.
Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /.*/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
The failover method for this repository; should be either
roundrobin
or priority
. Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /^roundrobin|priority$/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
The URL for the GPG CA key for this repository. Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /.*/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
Whether to check the GPG signature on packages installed
from this repository.
Valid values are: false/0/no or true/1/yes.
Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /^(true|false|0|1|no|yes)$/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
The URL for the GPG key with which packages from this
repository are signed. Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /.*/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
What to cache from this repository. Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /^(packages|all|none)$/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
The URL of a remote file containing additional yum configuration
settings. Puppet does not check for this file’s existence or validity.
Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /.*/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
List of shell globs. If this is set, only packages
matching one of the globs will be considered for
update or install from this repository. Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /.*/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
Whether HTTP/1.1 keepalive should be used with this repository.
Valid values are: false/0/no or true/1/yes.
Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /^(true|false|0|1|no|yes)$/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
Number of seconds after which the metadata will expire.
Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /^([0-9]+[dhm]?|never)$/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
Metalink for mirrors. Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /.*/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
The URL that holds the list of mirrors for this repository.
Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /.*/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
Time (in seconds) after which the mirrorlist locally cached
will expire.
Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /^[0-9]+$/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
Priority of this repository from 1-99. Requires that
the priorities
plugin is installed and enabled.
Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /.*/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
Enable or disable protection for this repository. Requires
that the protectbase
plugin is installed and enabled.
Valid values are: false/0/no or true/1/yes.
Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /^(true|false|0|1|no|yes)$/
.
(↑ Back to yumrepo attributes)
The specific backend to use for this yumrepo
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
URL of a proxy server that Yum should use when accessing this repository.
This attribute can also be set to '_none_'
, which will make Yum bypass any
global proxy settings when accessing this repository.
Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /.*/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
Password for this proxy. Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /.*/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
Username for this proxy. Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /.*/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
Whether to check the GPG signature on repodata.
Valid values are: false/0/no or true/1/yes.
Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /^(true|false|0|1|no|yes)$/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
Set the number of times any attempt to retrieve a file should
retry before returning an error. Setting this to 0
makes yum
try forever.
Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /^[0-9]+$/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
Access the repository via S3.
Valid values are: false/0/no or true/1/yes.
Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /^(true|false|0|1|no|yes)$/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
Should yum skip this repository if unable to reach it.
Valid values are: false/0/no or true/1/yes.
Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /^(true|false|0|1|no|yes)$/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
Path to the directory containing the databases of the
certificate authorities yum should use to verify SSL certificates.
Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /.*/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
Path to the SSL client certificate yum should use to connect
to repositories/remote sites. Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /.*/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
Path to the SSL client key yum should use to connect
to repositories/remote sites. Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /.*/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
Should yum verify SSL certificates/hosts at all.
Valid values are: false/0/no or true/1/yes.
Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /^(true|false|0|1|no|yes)$/
.
(↑ Back to yumrepo attributes)
The filename to write the yum repository to.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
Enable bandwidth throttling for downloads. This option
can be expressed as a absolute data rate in bytes/sec or a
percentage 60%
. An SI prefix (k, M or G) may be appended
to the data rate values.
Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /^\d+[kMG%]?$/
.
(↑ Back to yumrepo attributes)
(Property: This attribute represents concrete state on the target system.)
Number of seconds to wait for a connection before timing
out. Set this to absent
to remove it from the file completely.
Valid values are absent
. Values can match /^\d+$/
.
(↑ Back to yumrepo attributes)
Manage yum repo configurations by parsing yum INI configuration files.
When fetching repo instances, directory entries in ‘/etc/yum/repos.d’, ‘/etc/yum.repos.d’, and the directory optionally specified by the reposdir key in ‘/etc/yum.conf’ will be checked. If a given directory does not exist it will be ignored. In addition, all sections in ‘/etc/yum.conf’ aside from ‘main’ will be created as sections.
When creating a new repository, a new section will be added in the first yum repo directory that exists. The custom directory specified by the ‘/etc/yum.conf’ reposdir property is checked first, followed by ‘/etc/yum/repos.d’, and then ‘/etc/yum.repos.d’. If none of these exist, the section will be created in ‘/etc/yum.conf’.
Manage zfs. Create destroy and set properties on zfs instances.
Autorequires: If Puppet is managing the zpool at the root of this zfs instance, the zfs resource will autorequire it. If Puppet is managing any parent zfs instances, the zfs resource will autorequire them.
zfs { 'resource title':
name => # (namevar) The full name for this filesystem (including the
ensure => # The basic property that the resource should be...
aclinherit => # The aclinherit property. Valid values are...
aclmode => # The aclmode property. Valid values are...
atime => # The atime property. Valid values are `on`...
canmount => # The canmount property. Valid values are `on`...
checksum => # The checksum property. Valid values are `on`...
compression => # The compression property. Valid values are `on`,
copies => # The copies property. Valid values are `1`, `2`...
dedup => # The dedup property. Valid values are `on`...
devices => # The devices property. Valid values are `on`...
exec => # The exec property. Valid values are `on`...
logbias => # The logbias property. Valid values are...
mountpoint => # The mountpoint property. Valid values are...
nbmand => # The nbmand property. Valid values are `on`...
primarycache => # The primarycache property. Valid values are...
provider => # The specific backend to use for this `zfs...
quota => # The quota property. Valid values are `<size>`...
readonly => # The readonly property. Valid values are `on`...
recordsize => # The recordsize property. Valid values are powers
refquota => # The refquota property. Valid values are...
refreservation => # The refreservation property. Valid values are...
reservation => # The reservation property. Valid values are...
secondarycache => # The secondarycache property. Valid values are...
setuid => # The setuid property. Valid values are `on`...
shareiscsi => # The shareiscsi property. Valid values are `on`...
sharenfs => # The sharenfs property. Valid values are `on`...
sharesmb => # The sharesmb property. Valid values are `on`...
snapdir => # The snapdir property. Valid values are `hidden`,
version => # The version property. Valid values are `1`, `2`,
volsize => # The volsize property. Valid values are...
vscan => # The vscan property. Valid values are `on`...
xattr => # The xattr property. Valid values are `on`...
zoned => # The zoned property. Valid values are `on`...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The full name for this filesystem (including the zpool).
(Property: This attribute represents concrete state on the target system.)
The basic property that the resource should be in.
Valid values are present
, absent
.
(Property: This attribute represents concrete state on the target system.)
The aclinherit property. Valid values are discard
, noallow
, restricted
, passthrough
, passthrough-x
.
(Property: This attribute represents concrete state on the target system.)
The aclmode property. Valid values are discard
, groupmask
, passthrough
.
(Property: This attribute represents concrete state on the target system.)
The atime property. Valid values are on
, off
.
(Property: This attribute represents concrete state on the target system.)
The canmount property. Valid values are on
, off
, noauto
.
(Property: This attribute represents concrete state on the target system.)
The checksum property. Valid values are on
, off
, fletcher2
, fletcher4
, sha256
.
(Property: This attribute represents concrete state on the target system.)
The compression property. Valid values are on
, off
, lzjb
, gzip
, gzip-[1-9]
, zle
.
(Property: This attribute represents concrete state on the target system.)
The copies property. Valid values are 1
, 2
, 3
.
(Property: This attribute represents concrete state on the target system.)
The dedup property. Valid values are on
, off
.
(Property: This attribute represents concrete state on the target system.)
The devices property. Valid values are on
, off
.
(Property: This attribute represents concrete state on the target system.)
The exec property. Valid values are on
, off
.
(Property: This attribute represents concrete state on the target system.)
The logbias property. Valid values are latency
, throughput
.
(Property: This attribute represents concrete state on the target system.)
The mountpoint property. Valid values are <path>
, legacy
, none
.
(Property: This attribute represents concrete state on the target system.)
The nbmand property. Valid values are on
, off
.
(Property: This attribute represents concrete state on the target system.)
The primarycache property. Valid values are all
, none
, metadata
.
The specific backend to use for this zfs
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
(Property: This attribute represents concrete state on the target system.)
The quota property. Valid values are <size>
, none
.
(Property: This attribute represents concrete state on the target system.)
The readonly property. Valid values are on
, off
.
(Property: This attribute represents concrete state on the target system.)
The recordsize property. Valid values are powers of two between 512 and 128k.
(Property: This attribute represents concrete state on the target system.)
The refquota property. Valid values are <size>
, none
.
(Property: This attribute represents concrete state on the target system.)
The refreservation property. Valid values are <size>
, none
.
(Property: This attribute represents concrete state on the target system.)
The reservation property. Valid values are <size>
, none
.
(Property: This attribute represents concrete state on the target system.)
The secondarycache property. Valid values are all
, none
, metadata
.
(Property: This attribute represents concrete state on the target system.)
The setuid property. Valid values are on
, off
.
(Property: This attribute represents concrete state on the target system.)
The shareiscsi property. Valid values are on
, off
, type=<type>
.
(Property: This attribute represents concrete state on the target system.)
The sharenfs property. Valid values are on
, off
, share(1M) options
(Property: This attribute represents concrete state on the target system.)
The sharesmb property. Valid values are on
, off
, sharemgr(1M) options
(Property: This attribute represents concrete state on the target system.)
The snapdir property. Valid values are hidden
, visible
.
(Property: This attribute represents concrete state on the target system.)
The version property. Valid values are 1
, 2
, 3
, 4
, current
.
(Property: This attribute represents concrete state on the target system.)
The volsize property. Valid values are <size>
(Property: This attribute represents concrete state on the target system.)
The vscan property. Valid values are on
, off
.
(Property: This attribute represents concrete state on the target system.)
The xattr property. Valid values are on
, off
.
(Property: This attribute represents concrete state on the target system.)
The zoned property. Valid values are on
, off
.
Provider for zfs.
zfs
.Manages Solaris zones.
Autorequires: If Puppet is managing the directory specified as the root of
the zone’s filesystem (with the path
attribute), the zone resource will
autorequire that directory.
zone { 'resource title':
name => # (namevar) The name of the...
ensure => # The running state of the zone. The valid states
autoboot => # Whether the zone should automatically boot....
clone => # Instead of installing the zone, clone it from...
create_args => # Arguments to the `zonecfg` create command. This
dataset => # The list of datasets delegated to the non-global
id => # The numerical ID of the zone. This number is...
inherit => # The list of directories that the zone inherits...
install_args => # Arguments to the `zoneadm` install command....
ip => # The IP address of the zone. IP addresses...
iptype => # The IP stack type of the zone. Valid values are
path => # The root of the zone's filesystem. Must be a...
pool => # The resource pool for this...
provider => # The specific backend to use for this `zone...
realhostname => # The actual hostname of the...
shares => # Number of FSS CPU shares allocated to the...
sysidcfg => # The text to go into the `sysidcfg` file when the
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The name of the zone.
(Property: This attribute represents concrete state on the target system.)
The running state of the zone. The valid states directly reflect
the states that zoneadm
provides. The states are linear,
in that a zone must be configured
, then installed
, and
only then can be running
. Note also that halt
is currently
used to stop zones.
Valid values are absent
, configured
, installed
, running
.
(Property: This attribute represents concrete state on the target system.)
Whether the zone should automatically boot.
Valid values are true
, false
.
Instead of installing the zone, clone it from another zone. If the zone root resides on a zfs file system, a snapshot will be used to create the clone; if it resides on a ufs filesystem, a copy of the zone will be used. The zone from which you clone must not be running.
Arguments to the zonecfg
create command. This can be used to create branded zones.
(Property: This attribute represents concrete state on the target system.)
The list of datasets delegated to the non-global zone from the global zone. All datasets must be zfs filesystem names which are different from the mountpoint.
The numerical ID of the zone. This number is autogenerated and cannot be changed.
(Property: This attribute represents concrete state on the target system.)
The list of directories that the zone inherits from the global zone. All directories must be fully qualified.
Arguments to the zoneadm
install command. This can be used to create branded zones.
(Property: This attribute represents concrete state on the target system.)
The IP address of the zone. IP addresses must be specified
with an interface, and may optionally be specified with a default router
(sometimes called a defrouter). The interface, IP address, and default
router should be separated by colons to form a complete IP address string.
For example: bge0:192.168.178.200
would be a valid IP address string
without a default router, and bge0:192.168.178.200:192.168.178.1
adds a
default router to it.
For zones with multiple interfaces, the value of this attribute should be an array of IP address strings (each of which must include an interface and may include a default router).
(Property: This attribute represents concrete state on the target system.)
The IP stack type of the zone.
Valid values are shared
, exclusive
.
(Property: This attribute represents concrete state on the target system.)
The root of the zone’s filesystem. Must be a fully qualified
file name. If you include %s
in the path, then it will be
replaced with the zone’s name. Currently, you cannot use
Puppet to move a zone. Consequently this is a readonly property.
(Property: This attribute represents concrete state on the target system.)
The resource pool for this zone.
The specific backend to use for this zone
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
The actual hostname of the zone.
(Property: This attribute represents concrete state on the target system.)
Number of FSS CPU shares allocated to the zone.
The text to go into the sysidcfg
file when the zone is first
booted. The best way is to use a template:
# $confdir/modules/site/templates/sysidcfg.erb
system_locale=en_US
timezone=GMT
terminal=xterms
security_policy=NONE
root_password=<%= password %>
timeserver=localhost
name_service=DNS {domain_name=<%= domain %> name_server=<%= nameserver %>}
network_interface=primary {hostname=<%= realhostname %>
ip_address=<%= ip %>
netmask=<%= netmask %>
protocol_ipv6=no
default_route=<%= defaultroute %>}
nfs4_domain=dynamic
And then call that:
zone { 'myzone':
ip => 'bge0:192.168.0.23',
sysidcfg => template('site/sysidcfg.erb'),
path => '/opt/zones/myzone',
realhostname => 'fully.qualified.domain.name',
}
The sysidcfg
only matters on the first booting of the zone,
so Puppet only checks for it at that time.
Provider for Solaris Zones.
/usr/sbin/zoneadm
, /usr/sbin/zonecfg
.osfamily
== solaris
.Manage zpools. Create and delete zpools. The provider WILL NOT SYNC, only report differences.
Supports vdevs with mirrors, raidz, logs and spares.
zpool { 'resource title':
pool => # (namevar) The name for this...
ensure => # The basic property that the resource should be...
disk => # The disk(s) for this pool. Can be an array or a...
log => # Log disks for this pool. This type does not...
mirror => # List of all the devices to mirror for this pool.
provider => # The specific backend to use for this `zpool...
raid_parity => # Determines parity when using the `raidz...
raidz => # List of all the devices to raid for this pool...
spare => # Spare disk(s) for this...
# ...plus any applicable metaparameters.
}
(Namevar: If omitted, this attribute’s value defaults to the resource’s title.)
The name for this pool.
(Property: This attribute represents concrete state on the target system.)
The basic property that the resource should be in.
Valid values are present
, absent
.
(Property: This attribute represents concrete state on the target system.)
The disk(s) for this pool. Can be an array or a space separated string.
(Property: This attribute represents concrete state on the target system.)
Log disks for this pool. This type does not currently support mirroring of log disks.
(Property: This attribute represents concrete state on the target system.)
List of all the devices to mirror for this pool. Each mirror should be a space separated string:
mirror => ["disk1 disk2", "disk3 disk4"],
The specific backend to use for this zpool
resource. You will seldom need to specify this — Puppet will usually
discover the appropriate provider for your platform.
Available providers are:
Determines parity when using the raidz
parameter.
(Property: This attribute represents concrete state on the target system.)
List of all the devices to raid for this pool. Should be an array of space separated strings:
raidz => ["disk1 disk2", "disk3 disk4"],
(Property: This attribute represents concrete state on the target system.)
Spare disk(s) for this pool.
Provider for zpool.
zpool
.NOTE: This page was generated from the Puppet source code on 2018-02-05 13:46:06 -0800